Getting rid of mach/timex.h usages below arch/arm
Subsystems (20)
cover Getting rid of mach/timex.h usages below arch/arm
Hello,
this patch series fixes all users of CLOCK_TICK_RATE to not use the the symbol provided by mach/timex.h. Together with a few patches I already sent out earlier [1] all users are fixed which should allow us to drop including mach/timex.h from asm/timex.h and remove all mach/timex.h files.
Best regards
Uwe
[1]
ARM: u300: fix timekeeping when periodic mode is used
rtc: pxa: drop usage of CLOCK_TICK_RATE
clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE
watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE
Uwe Kleine-K?nig (4):
ARM: sa1100: stop using mach/timex.h
ARM: netx: stop using mach/timex.h
ARM: mmp: stop using mach/timex.h
ARM: ep93xx: stop using mach/timex.h
arch/arm/mach-ep93xx/core.c | 3 ++- arch/arm/mach-mmp/time.c | 12 +++++++++--- arch/arm/mach-netx/time.c | 6 ++++-- arch/arm/mach-sa1100/time.c | 4 +++- 4 files changed, 18 insertions(+), 7 deletions(-)
Signature · 1 line
1.8.4.2
PATCH 1/4 ARM: sa1100: stop using mach/timex.h
mach/timex.h is the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in sa1100 arch code by substituting CLOCK_TICK_RATE by a local cpp symbol.
--- arch/arm/mach-sa1100/time.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/mach-sa1100/time.c +3 -1
@@ -20,6 +20,8 @@#include <mach/hardware.h> #include <mach/irqs.h> +#define SA1100_CLOCK_FREQ 3686400 + static u32 notrace sa1100_read_sched_clock(void) {return readl_relaxed (OSCR );
@@ -128,7 +130,7 @@ void __init sa1100_timer_init(void)setup_irq (IRQ_OST0 , &sa1100_timer_irq); -clocksource_mmio_init (OSCR ,"oscr" ,CLOCK_TICK_RATE ,200 ,32 , +clocksource_mmio_init (OSCR ,"oscr" ,SA1100_CLOCK_FREQ ,200 ,32 , clocksource_mmio_readl_up);clockevents_config_and_register (&ckevt_sa1100_osmr0,3686400 ,MIN_OSCR_DELTA *2 ,0x7fffffff );
Signature · 1 line
1.8.4.2
PATCH 1/4 ARM: sa1100: stop using mach/timex.h
Hello,
[expanded To: and Cc: to include the people scripts/get_maintainer.pl suggested]
Quoted 4 lines · Uwe Kleine-K?nig
mach/timex.his the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in sa1100 arch code by substitutingCLOCK_TICK_RATEby a local cpp symbol.
Who feels responsible to give (a reason for not giving) an Ack here?
Thanks
Uwe
Quoted 35 lines
Signed-off-by Uwe Kleine-K?nig <[email protected]>--- arch/arm/mach-sa1100/time.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)arch/arm/mach-sa1100/time.c +3
-1@@ -20,6 +20,8 @@#include <mach/hardware.h> #include <mach/irqs.h> +#define SA1100_CLOCK_FREQ 3686400 + static u32 notrace sa1100_read_sched_clock(void) {return readl_relaxed (OSCR );@@ -128,7 +130,7 @@ void __init sa1100_timer_init(void)setup_irq (IRQ_OST0 , &sa1100_timer_irq); -clocksource_mmio_init (OSCR ,"oscr" ,CLOCK_TICK_RATE ,200 ,32 , +clocksource_mmio_init (OSCR ,"oscr" ,SA1100_CLOCK_FREQ ,200 ,32 , clocksource_mmio_readl_up);clockevents_config_and_register (&ckevt_sa1100_osmr0,3686400 ,MIN_OSCR_DELTA *2 ,0x7fffffff );Signature · 7 lines
1.8.4.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |
PATCH 2/4 ARM: netx: stop using mach/timex.h
In reply to Uwe Kleine-Königmach/timex.h is the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in netx arch code by substituting CLOCK_TICK_RATE by a local cpp symbol.
--- arch/arm/mach-netx/time.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/arm/mach-netx/time.c +4 -2
@@ -28,6 +28,8 @@#include <asm/mach/time.h> #include <mach/netx-regs.h> +#define NETX_CLOCK_FREQ 100000000 +#define TIMER_CLOCKEVENT 0#define TIMER_CLOCKSOURCE 1
@@ -137,11 +139,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));clocksource_mmio_init (NETX_GPIO_COUNTER_CURRENT (TIMER_CLOCKSOURCE ), -"netx_timer" ,CLOCK_TICK_RATE ,200 ,32 , clocksource_mmio_readl_up); +"netx_timer" ,NETX_CLOCK_FREQ ,200 ,32 , clocksource_mmio_readl_up);/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask =cpumask_of (0 ); -clockevents_config_and_register (&netx_clockevent,CLOCK_TICK_RATE , +clockevents_config_and_register (&netx_clockevent,NETX_CLOCK_FREQ ,0xa00 ,0xfffffffe ); }
Signature · 1 line
1.8.4.2
PATCH 2/4 ARM: netx: stop using mach/timex.h
Quoted 6 lines · Uwe Kleine-K?nig
mach/timex.his the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in netx arch code by substitutingCLOCK_TICK_RATEby a local cpp symbol.Signed-off-by Uwe Kleine-K?nig <[email protected]>
Sascha
Quoted 35 lines
--- arch/arm/mach-netx/time.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)arch/arm/mach-netx/time.c +4
-2@@ -28,6 +28,8 @@#include <asm/mach/time.h> #include <mach/netx-regs.h> +#define NETX_CLOCK_FREQ 100000000 +#define TIMER_CLOCKEVENT 0#define TIMER_CLOCKSOURCE 1@@ -137,11 +139,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));clocksource_mmio_init (NETX_GPIO_COUNTER_CURRENT (TIMER_CLOCKSOURCE ), -"netx_timer" ,CLOCK_TICK_RATE ,200 ,32 , clocksource_mmio_readl_up); +"netx_timer" ,NETX_CLOCK_FREQ ,200 ,32 , clocksource_mmio_readl_up);/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask =cpumask_of (0 ); -clockevents_config_and_register (&netx_clockevent,CLOCK_TICK_RATE , +clockevents_config_and_register (&netx_clockevent,NETX_CLOCK_FREQ ,0xa00 ,0xfffffffe ); }Signature · 1 line
1.8.4.2
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH 3/4 ARM: mmp: stop using mach/timex.h
In reply to Uwe Kleine-Königmach/timex.h is the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in mmp arch code by substituting CLOCK_TICK_RATE by a local cpp symbol.
--- arch/arm/mach-mmp/time.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
arch/arm/mach-mmp/time.c +9 -3
@@ -39,6 +39,12 @@#include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif +#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE#define MAX_DELTA (0xfffffffe)
@@ -195,14 +201,14 @@ void __init timer_init(int irq) {timer_config (); -setup_sched_clock (mmp_read_sched_clock,32 ,CLOCK_TICK_RATE ); +setup_sched_clock (mmp_read_sched_clock,32 ,MMP_CLOCK_FREQ ); ckevt.cpumask =cpumask_of (0 );setup_irq (irq, &timer_irq); -clocksource_register_hz (&cksrc,CLOCK_TICK_RATE ); -clockevents_config_and_register (&ckevt,CLOCK_TICK_RATE , +clocksource_register_hz (&cksrc,MMP_CLOCK_FREQ ); +clockevents_config_and_register (&ckevt,MMP_CLOCK_FREQ ,MIN_DELTA ,MAX_DELTA ); }
Signature · 1 line
1.8.4.2
Haojian Zhuang
maintainerPATCH 3/4 ARM: mmp: stop using mach/timex.h
Quoted 46 lines · Uwe Kleine-K?nig
mach/timex.his the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in mmp arch code by substitutingCLOCK_TICK_RATEby a local cpp symbol.Signed-off-by Uwe Kleine-K?nig <[email protected]>--- arch/arm/mach-mmp/time.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)arch/arm/mach-mmp/time.c +9
-4@@ -39,6 +39,12 @@#include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif +#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE#define MAX_DELTA (0xfffffffe)@@ -195,14 +201,14 @@ void __init timer_init(int irq) {timer_config (); -setup_sched_clock (mmp_read_sched_clock,32 ,CLOCK_TICK_RATE ); +setup_sched_clock (mmp_read_sched_clock,32 ,MMP_CLOCK_FREQ ); ckevt.cpumask =cpumask_of (0 );setup_irq (irq, &timer_irq); -clocksource_register_hz (&cksrc,CLOCK_TICK_RATE ); -clockevents_config_and_register (&ckevt,CLOCK_TICK_RATE , +clocksource_register_hz (&cksrc,MMP_CLOCK_FREQ ); +clockevents_config_and_register (&ckevt,MMP_CLOCK_FREQ ,MIN_DELTA ,MAX_DELTA ); } --
Quoted 2 lines
1.8.4.2
PATCH 4/4 ARM: ep93xx: stop using mach/timex.h
In reply to Uwe Kleine-Königmach/timex.h is the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in ep93xx arch code by substituting CLOCK_TICK_RATE by a local cpp symbol.
--- arch/arm/mach-ep93xx/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-ep93xx/core.c +2 -1
@@ -116,8 +116,9 @@ void __init ep93xx_map_io(void)#define EP93XX_TIMER123_CLOCK 508469#define EP93XX_TIMER4_CLOCK 983040 +#define EP93XX_CLOCK_FREQ 983040#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_CLOCK_FREQ, HZ)static unsigned int last_jiffy_time;
Signature · 1 line
1.8.4.2
PATCH 4/4 ARM: ep93xx: stop using mach/timex.h
Quoted 15 lines · Uwe Kleine-K?nig
mach/timex.his the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in ep93xx arch code by substitutingCLOCK_TICK_RATEby a local cpp symbol.Signed-off-by Uwe Kleine-K?nig <[email protected]>--- arch/arm/mach-ep93xx/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm/mach-ep93xx/core.c +0
-0
arch/arm/mach-ep93xx/core.c void __init ep93xx_map_io(void) · line 119
Quoted 4 lines
arch/arm/mach-ep93xx/core.c +1
-0@@ -116,8 +116,9 @@ void __init ep93xx_map_io(void)#define EP93XX_TIMER123_CLOCK 508469#define EP93XX_TIMER4_CLOCK 983040 +#define EP93XX_CLOCK_FREQ 983040
I would prefer that the already defined symbol EP93XX_TIMER4_CLOCK be used instead of adding a new one.
arch/arm/mach-ep93xx/core.c void __init ep93xx_map_io(void) · line 123
Quoted 5 lines
arch/arm/mach-ep93xx/core.c +1
-1#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_CLOCK_FREQ, HZ)static unsigned int last_jiffy_time;
Other than that comment, I have no issues with this.
PATCH v2 4/4 ARM: ep93xx: stop using mach/timex.h
In reply to Uwe Kleine-Königmach/timex.h is the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in ep93xx arch code by substituting CLOCK_TICK_RATE by an already defined local cpp symbol.
---
Changes since (implicit) v1, sent with
Message-Id: 1384292466-31725-5-git-send-email-u.kleine-koenig at pengutronix.de:
- ack by H Hartley Sweeten
- use already existing symbol instead of introducing a new one
arch/arm/mach-ep93xx/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-ep93xx/core.c +1 -1
@@ -115,7 +115,7 @@ void __init ep93xx_map_io(void)#define EP93XX_TIMER4_CLOCK 983040#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)static unsigned int last_jiffy_time;
Signature · 1 line
1.8.4.2
PATCH v2 4/4 ARM: ep93xx: stop using mach/timex.h
Quoted 21 lines · Uwe Kleine-K?nig
mach/timex.his the last remaining header that is unused for multiarch builds but necessary for singlearch builds. To allow to get rid of it for singlearch builds, too, drop its usage in ep93xx arch code by substitutingCLOCK_TICK_RATEby an already defined local cpp symbol.Signed-off-by Uwe Kleine-K?nig <[email protected]>---
Changes since (implicit) v1, sent with
Message-Id: 1384292466-31725-5-git-send-email-u.kleine-koenig at pengutronix.de:
- ack by H Hartley Sweeten
- use already existing symbol instead of introducing a new onearch/arm/mach-ep93xx/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-ep93xx/core.c +0
-0
arch/arm/mach-ep93xx/core.c void __init ep93xx_map_io(void) · line 120
Quoted 7 lines
arch/arm/mach-ep93xx/core.c +1
-1@@ -115,7 +115,7 @@ void __init ep93xx_map_io(void)#define EP93XX_TIMER4_CLOCK 983040#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)static unsigned int last_jiffy_time;
Thanks,
Hartley
[PATCH 6/4] ARM: ixp4xx: stop using <mach/timex.h>
In reply to Uwe Kleine-KönigThe only user of symbols defined in ixp4xx's <mach/timex.h> is common.c. Fix that one up by moving the used #define into common.c directly. This makes ixp4xx not to be a bar to dropping support for <mach/timex.h>.
---
Hello,
Similar to the ixp4xx-beeper patch I target to take this one as part of a pull request to drop <mach/timex.h>. So dear maintainers, I'd prefer you to give your ack to allow me to forward this patch to the arm-soc people instead of you taking it directly.
Thanks
Uwe
arch/arm/mach-ixp4xx/common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-ixp4xx/common.c +2 -1
@@ -23,7 +23,6 @@#include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> -#include <linux/timex.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h>
@@ -45,6 +44,8 @@#include <asm/mach/irq.h> #include <asm/mach/time.h> +#define IXP4XX_TIMER_FREQ 66666000 +static void __init ixp4xx_clocksource_init (void );static void __init ixp4xx_clockevent_init (void );static struct clock_event_device clockevent_ixp4xx;
Signature · 1 line
1.8.4.2
cover Getting rid of mach/timex.h usages below arch/arm
In reply to Uwe Kleine-KönigHello,
short version: I still need acks from akpm and Nicolas Ferre for my cleanup series.
long version:
codewise I'm happy with my series now. The last patch removes all remaining <mach/timex.h> files and even drops the global (dummy) definition of CLOCK_TICK_RATE.
The following patches are included:
Linus Walleij (1):
( 1) ARM/serial: at91: switch atmel serial to use gpiolib
Uwe Kleine-K?nig (11):
( 2) rtc: at91sam9: include <mach/hardware.h> explicitly ( 3) rtc: pxa: drop usage of CLOCK_TICK_RATE ( 4) clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE ( 5) ARM: sa1100: stop using mach/timex.h ( 6) ARM: netx: stop using mach/timex.h ( 7) ARM: mmp: stop using mach/timex.h ( 8) ARM: ep93xx: stop using mach/timex.h ( 9) ARM: at91: don't use <mach/timex.h> (10) input: ixp4xx-beeper: don't use symbols from <mach/timex.h> (11) ARM: ixp4xx: stop using <mach/timex.h> (12) ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
The things still open from my side are:
- I don't have an explicit blessing from Nicolas Ferre to take patch 1 in this series
- For the rtc patches (2, 3) I don't have an rtc maintainer ack, patch 2 is already in next-20131125 (commit:6a3f18c5874e, branch akpm-current/current) and also later next releases. I asked Andrew for his blessing to take the two patches, no reply yet.
- I didn't get feedback for the sa1100 and ixp4xx patch (5, 11). I think this isn't a big problem though because these are in the area of the arm-soc maintainers.
The series is available from
git://git.pengutronix.de/git/ukl/linux.git deprecatemachtimexh
and has the nice shortstat
73 files changed, 129 insertions(+), 722 deletions(-)
. The only patch not yet sent out as it is now is patch 12. It's just
arch/arm/include/asm/timex.h +0 -6
@@ -12,12 +12,6 @@#ifndef _ASMARM_TIMEX_H#define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include <mach/timex.h> -#endif -typedef unsigned long cycles_t ;#define get_cycles () ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
plus rm arch/arm/mach-*/include/mach/timex.h. I'll send it out in reply to this mail.
Merging next/master into my branch results in 4 conflicts in arch/arm/mach-at91/at91sam9{26[013],rl}.c. This is commit 2edb90a (ARM:
at91: move at91_pmc.h to include/linux/clk/at91_pmc.h) in armsoc/at91/sama5-ccf vs. my patch "ARM: at91: don't use <mach/timex.h>" (9). The former removes
#include <mach/at91_pmc.h>
at the location where my patch adds
#include <mach/hardware.h>
. The fix is to do exactly this. Olof already agreed on irc that he is OK to resolve that when merging.
Thanks
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |
PATCH 12/12 ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
While <mach/timex.h> isn't used for multi-platform builds since long it still is for "normal" builds. As the previous patches fix all sites to not make use of this per-platform file, it can go now for good also for platforms that are not (yet) converted to multi-platform.
While at it there are no users of CLOCK_TICK_RATE any more, so also drop the dummy #define.
--- arch/arm/include/asm/timex.h | 6 ----- arch/arm/mach-at91/include/mach/timex.h | 37 --------------------------- arch/arm/mach-clps711x/include/mach/timex.h | 2 -- arch/arm/mach-davinci/include/mach/timex.h | 22 ---------------- arch/arm/mach-dove/include/mach/timex.h | 9 ------- arch/arm/mach-ebsa110/include/mach/timex.h | 19 -------------- arch/arm/mach-ep93xx/include/mach/timex.h | 5 ---- arch/arm/mach-exynos/include/mach/timex.h | 29 --------------------- arch/arm/mach-footbridge/include/mach/timex.h | 18 ------------- arch/arm/mach-gemini/include/mach/timex.h | 13 ---------- arch/arm/mach-integrator/include/mach/timex.h | 26 ------------------- arch/arm/mach-iop13xx/include/mach/timex.h | 1 - arch/arm/mach-iop32x/include/mach/timex.h | 6 ----- arch/arm/mach-iop33x/include/mach/timex.h | 6 ----- arch/arm/mach-ixp4xx/include/mach/timex.h | 16 ------------ arch/arm/mach-kirkwood/include/mach/timex.h | 10 -------- arch/arm/mach-ks8695/include/mach/timex.h | 21 --------------- arch/arm/mach-lpc32xx/include/mach/timex.h | 28 -------------------- arch/arm/mach-mmp/include/mach/timex.h | 13 ---------- arch/arm/mach-msm/include/mach/timex.h | 21 --------------- arch/arm/mach-mv78xx0/include/mach/timex.h | 9 ------- arch/arm/mach-netx/include/mach/timex.h | 20 --------------- arch/arm/mach-omap1/include/mach/timex.h | 5 ---- arch/arm/mach-omap2/include/mach/timex.h | 5 ---- arch/arm/mach-orion5x/include/mach/timex.h | 11 -------- arch/arm/mach-pxa/include/mach/timex.h | 34 ------------------------ arch/arm/mach-realview/include/mach/timex.h | 23 ----------------- arch/arm/mach-rpc/include/mach/timex.h | 17 ------------ arch/arm/mach-s3c24xx/include/mach/timex.h | 24 ----------------- arch/arm/mach-s3c64xx/include/mach/timex.h | 24 ----------------- arch/arm/mach-s5p64x0/include/mach/timex.h | 27 ------------------- arch/arm/mach-s5pc100/include/mach/timex.h | 24 ----------------- arch/arm/mach-s5pv210/include/mach/timex.h | 29 --------------------- arch/arm/mach-sa1100/include/mach/timex.h | 12 --------- arch/arm/mach-shmobile/include/mach/timex.h | 6 ----- arch/arm/mach-spear/include/mach/timex.h | 19 -------------- arch/arm/mach-versatile/include/mach/timex.h | 23 ----------------- arch/arm/mach-w90x900/include/mach/timex.h | 25 ------------------ arch/arm/plat-omap/include/plat/timex.h | 33 ------------------------ 39 files changed, 678 deletions(-) delete mode 100644 arch/arm/mach-at91/include/mach/timex.h delete mode 100644 arch/arm/mach-clps711x/include/mach/timex.h delete mode 100644 arch/arm/mach-davinci/include/mach/timex.h delete mode 100644 arch/arm/mach-dove/include/mach/timex.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/timex.h delete mode 100644 arch/arm/mach-ep93xx/include/mach/timex.h delete mode 100644 arch/arm/mach-exynos/include/mach/timex.h delete mode 100644 arch/arm/mach-footbridge/include/mach/timex.h delete mode 100644 arch/arm/mach-gemini/include/mach/timex.h delete mode 100644 arch/arm/mach-integrator/include/mach/timex.h delete mode 100644 arch/arm/mach-iop13xx/include/mach/timex.h delete mode 100644 arch/arm/mach-iop32x/include/mach/timex.h delete mode 100644 arch/arm/mach-iop33x/include/mach/timex.h delete mode 100644 arch/arm/mach-ixp4xx/include/mach/timex.h delete mode 100644 arch/arm/mach-kirkwood/include/mach/timex.h delete mode 100644 arch/arm/mach-ks8695/include/mach/timex.h delete mode 100644 arch/arm/mach-lpc32xx/include/mach/timex.h delete mode 100644 arch/arm/mach-mmp/include/mach/timex.h delete mode 100644 arch/arm/mach-msm/include/mach/timex.h delete mode 100644 arch/arm/mach-mv78xx0/include/mach/timex.h delete mode 100644 arch/arm/mach-netx/include/mach/timex.h delete mode 100644 arch/arm/mach-omap1/include/mach/timex.h delete mode 100644 arch/arm/mach-omap2/include/mach/timex.h delete mode 100644 arch/arm/mach-orion5x/include/mach/timex.h delete mode 100644 arch/arm/mach-pxa/include/mach/timex.h delete mode 100644 arch/arm/mach-realview/include/mach/timex.h delete mode 100644 arch/arm/mach-rpc/include/mach/timex.h delete mode 100644 arch/arm/mach-s3c24xx/include/mach/timex.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/timex.h delete mode 100644 arch/arm/mach-s5p64x0/include/mach/timex.h delete mode 100644 arch/arm/mach-s5pc100/include/mach/timex.h delete mode 100644 arch/arm/mach-s5pv210/include/mach/timex.h delete mode 100644 arch/arm/mach-sa1100/include/mach/timex.h delete mode 100644 arch/arm/mach-shmobile/include/mach/timex.h delete mode 100644 arch/arm/mach-spear/include/mach/timex.h delete mode 100644 arch/arm/mach-versatile/include/mach/timex.h delete mode 100644 arch/arm/mach-w90x900/include/mach/timex.h delete mode 100644 arch/arm/plat-omap/include/plat/timex.h
arch/arm/include/asm/timex.h +0 -6
@@ -12,12 +12,6 @@#ifndef _ASMARM_TIMEX_H#define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include <mach/timex.h> -#endif -typedef unsigned long cycles_t ;#define get_cycles () ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
arch/arm/mach-at91/include/mach/timex.h deleted +0 -37
@@ -1,37 +0,0 @@ -/* -* arch/arm/mach-at91/include/mach/timex.h -* -* Copyright (C) 2003 SAN People -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_AT91X40 - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#else - -#define CLOCK_TICK_RATE 12345678 - -#endif - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-clps711x/include/mach/timex.h deleted +0 -2
@@ -1,2 +0,0 @@ -/* Bogus value */ -#define CLOCK_TICK_RATE 512000
arch/arm/mach-davinci/include/mach/timex.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* DaVinci timer defines -* -* Author: Kevin Hilman, MontaVista Software, Inc. <[email protected]> -* -* 2007 (c) MontaVista Software, Inc. This file is licensed under -* the terms of the GNU General Public License version 2. This program -* is licensed "as is" without any warranty of any kind, whether express -* or implied. -*/ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* -* Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, -* but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ -* linux/jiffies.h) are not used directly in code. Currently none of the -* code relevant to DaVinci platform depends on these values directly. -*/ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */
arch/arm/mach-dove/include/mach/timex.h deleted +0 -9
@@ -1,9 +0,0 @@ -/* -* arch/arm/mach-dove/include/mach/timex.h -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without any -* warranty of any kind, whether express or implied. -*/ - -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-ebsa110/include/mach/timex.h deleted +0 -19
@@ -1,19 +0,0 @@ -/* -* arch/arm/mach-ebsa110/include/mach/timex.h -* -* Copyright (C) 1997, 1998 Russell King -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* EBSA110 architecture timex specifications -*/ - -/* -* On the EBSA, the clock ticks at weird rates. -* This is therefore not used to calculate the -* divisor. -*/ -#define CLOCK_TICK_RATE 47894000 -
arch/arm/mach-ep93xx/include/mach/timex.h deleted +0 -5
@@ -1,5 +0,0 @@ -/* -* arch/arm/mach-ep93xx/include/mach/timex.h -*/ - -#define CLOCK_TICK_RATE 983040
arch/arm/mach-exynos/include/mach/timex.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/timex.h -* -* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. -* http://www.samsung.com -* -* Copyright (c) 2003-2010 Simtec Electronics -* Ben Dooks <[email protected]> -* -* Based on arch/arm/mach-s5p6442/include/mach/timex.h -* -* EXYNOS4 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-footbridge/include/mach/timex.h deleted +0 -18
@@ -1,18 +0,0 @@ -/* -* arch/arm/mach-footbridge/include/mach/timex.h -* -* Copyright (C) 1998 Russell King -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* EBSA285 architecture timex specifications -*/ - -/* -* We assume a constant here; this satisfies the maths in linux/timex.h -* and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but -* this must be a constant. -*/ -#define CLOCK_TICK_RATE (50000000/16)
arch/arm/mach-gemini/include/mach/timex.h deleted +0 -13
@@ -1,13 +0,0 @@ -/* -* Gemini timex specifications -* -* Copyright (C) 2008-2009 Paulius Zaleckas <[email protected]> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -*/ - -/* When AHB bus frequency is 150MHz */ -#define CLOCK_TICK_RATE 38000000
arch/arm/mach-integrator/include/mach/timex.h deleted +0 -26
@@ -1,26 +0,0 @@ -/* -* arch/arm/mach-integrator/include/mach/timex.h -* -* Integrator architecture timex specifications -* -* Copyright (C) 1999 ARM Limited -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* -* ?? -*/ -#define CLOCK_TICK_RATE (50000000 / 16)
arch/arm/mach-iop13xx/include/mach/timex.h deleted +0 -1
@@ -1 +0,0 @@ -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-iop32x/include/mach/timex.h deleted +0 -6
@@ -1,6 +0,0 @@ -/* -* arch/arm/mach-iop32x/include/mach/timex.h -* -* IOP32x architecture timex specifications -*/ -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-iop33x/include/mach/timex.h deleted +0 -6
@@ -1,6 +0,0 @@ -/* -* arch/arm/mach-iop33x/include/mach/timex.h -* -* IOP3xx architecture timex specifications -*/ -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-ixp4xx/include/mach/timex.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* arch/arm/mach-ixp4xx/include/mach/timex.h -* -*/ - -#include <mach/ixp4xx-regs.h> - -/* -* We use IXP425 General purpose timer for our timer needs, it runs at -* 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the -* timer register ignores the bottom 2 bits of the LATCH value. -*/ -#define IXP4XX_TIMER_FREQ 66666000 -#define CLOCK_TICK_RATE \ - (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) -
arch/arm/mach-kirkwood/include/mach/timex.h deleted +0 -10
@@ -1,10 +0,0 @@ -/* -* arch/arm/mach-kirkwood/include/mach/timex.h -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without any -* warranty of any kind, whether express or implied. -*/ - -#define CLOCK_TICK_RATE (100 * HZ) -
arch/arm/mach-ks8695/include/mach/timex.h deleted +0 -21
@@ -1,21 +0,0 @@ -/* -* arch/arm/mach-ks8695/include/mach/timex.h -* -* Copyright (C) 2006 Simtec Electronics -* Ben Dooks <[email protected]> -* -* KS8695 - Time Parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include <mach/hardware.h> - -#define CLOCK_TICK_RATE KS8695_CLOCK_RATE - -#endif
arch/arm/mach-lpc32xx/include/mach/timex.h deleted +0 -28
@@ -1,28 +0,0 @@ -/* -* arch/arm/mach-lpc32xx/include/mach/timex.h -* -* Author: Kevin Wells <[email protected]> -* -* Copyright (C) 2010 NXP Semiconductors -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* -* Rate in Hz of the main system oscillator. This value should match -* the value 'MAIN_OSC_FREQ' in platform.h -*/ -#define CLOCK_TICK_RATE 13000000 - -#endif
arch/arm/mach-mmp/include/mach/timex.h deleted +0 -13
@@ -1,13 +0,0 @@ -/* -* linux/arch/arm/mach-mmp/include/mach/timex.h -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif
arch/arm/mach-msm/include/mach/timex.h deleted +0 -21
@@ -1,21 +0,0 @@ -/* arch/arm/mach-msm/include/mach/timex.h -* -* Copyright (C) 2007 Google, Inc. -* -* This software is licensed under the terms of the GNU General Public -* License version 2, as published by the Free Software Foundation, and -* may be copied, distributed, and modified under those terms. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -*/ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif
arch/arm/mach-mv78xx0/include/mach/timex.h deleted +0 -9
@@ -1,9 +0,0 @@ -/* -* arch/arm/mach-mv78xx0/include/mach/timex.h -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without any -* warranty of any kind, whether express or implied. -*/ - -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-netx/include/mach/timex.h deleted +0 -20
@@ -1,20 +0,0 @@ -/* -* arch/arm/mach-netx/include/mach/timex.h -* -* Copyright (C) 2005 Sascha Hauer <[email protected]>, Pengutronix -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 -* as published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#define CLOCK_TICK_RATE 100000000
arch/arm/mach-omap1/include/mach/timex.h deleted +0 -5
@@ -1,5 +0,0 @@ -/* -* arch/arm/mach-omap1/include/mach/timex.h -*/ - -#include <plat/timex.h>
arch/arm/mach-omap2/include/mach/timex.h deleted +0 -5
@@ -1,5 +0,0 @@ -/* -* arch/arm/mach-omap2/include/mach/timex.h -*/ - -#include <plat/timex.h>
arch/arm/mach-orion5x/include/mach/timex.h deleted +0 -11
@@ -1,11 +0,0 @@ -/* -* arch/arm/mach-orion5x/include/mach/timex.h -* -* Tzachi Perelstein <[email protected]> -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without any -* warranty of any kind, whether express or implied. -*/ - -#define CLOCK_TICK_RATE (100 * HZ)
arch/arm/mach-pxa/include/mach/timex.h deleted +0 -34
@@ -1,34 +0,0 @@ -/* -* arch/arm/mach-pxa/include/mach/timex.h -* -* Author: Nicolas Pitre -* Created: Jun 15, 2001 -* Copyright: MontaVista Software Inc. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -/* Various drivers are still using the constant of CLOCK_TICK_RATE, for -* those drivers to at least work, the definition is provided here. -* -* NOTE: this is no longer accurate when multiple processors and boards -* are selected, newer drivers should not depend on this any more. Use -* either the clocksource/clockevent or get this at run-time by calling -* get_clock_tick_rate() (as defined in generic.c). -*/ - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif
arch/arm/mach-realview/include/mach/timex.h deleted +0 -23
@@ -1,23 +0,0 @@ -/* -* arch/arm/mach-realview/include/mach/timex.h -* -* RealView architecture timex specifications -* -* Copyright (C) 2003 ARM Limited -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#define CLOCK_TICK_RATE (50000000 / 16)
arch/arm/mach-rpc/include/mach/timex.h deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* arch/arm/mach-rpc/include/mach/timex.h -* -* Copyright (C) 1997, 1998 Russell King -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* RiscPC architecture timex specifications -*/ - -/* -* On the RiscPC, the clock ticks at 2MHz. -*/ -#define CLOCK_TICK_RATE 2000000 -
arch/arm/mach-s3c24xx/include/mach/timex.h deleted +0 -24
@@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h -* -* Copyright (c) 2003-2005 Simtec Electronics -* Ben Dooks <[email protected]> -* -* S3C2410 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s3c64xx/include/mach/timex.h deleted +0 -24
@@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h -* -* Copyright (c) 2003-2005 Simtec Electronics -* Ben Dooks <[email protected]> -* -* S3C6400 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s5p64x0/include/mach/timex.h deleted +0 -27
@@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h -* -* Copyright (c) 2010 Samsung Electronics Co., Ltd. -* http://www.samsung.com -* -* Copyright (c) 2003-2005 Simtec Electronics -* Ben Dooks <[email protected]> -* -* S5P64X0 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s5pc100/include/mach/timex.h deleted +0 -24
@@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h -* -* Copyright (c) 2003-2005 Simtec Electronics -* Ben Dooks <[email protected]> -* -* S3C6400 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s5pv210/include/mach/timex.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h -* -* Copyright (c) 2003-2010 Simtec Electronics -* Ben Dooks <[email protected]> -* -* Copyright (c) 2010 Samsung Electronics Co., Ltd. -* http://www.samsung.com/ -* -* Based on arch/arm/mach-s5p6442/include/mach/timex.h -* -* S5PV210 - time parameters -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it -* a variable is useless. It seems as long as we make our timers an -* exact multiple of HZ, any value that makes a 1->1 correspondence -* for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-sa1100/include/mach/timex.h deleted +0 -12
@@ -1,12 +0,0 @@ -/* -* arch/arm/mach-sa1100/include/mach/timex.h -* -* SA1100 architecture timex specifications -* -* Copyright (C) 1998 -*/ - -/* -* SA1100 timer -*/ -#define CLOCK_TICK_RATE 3686400
arch/arm/mach-shmobile/include/mach/timex.h deleted +0 -6
@@ -1,6 +0,0 @@ -#ifndef __ASM_MACH_TIMEX_H -#define __ASM_MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1193180/* unused i8253 PIT value */ - -#endif /* __ASM_MACH_TIMEX_H */
arch/arm/mach-spear/include/mach/timex.h deleted +0 -19
@@ -1,19 +0,0 @@ -/* -* arch/arm/plat-spear/include/plat/timex.h -* -* SPEAr platform specific timex definitions -* -* Copyright (C) 2009 ST Microelectronics -* Viresh Kumar <[email protected]> -* -* This file is licensed under the terms of the GNU General Public -* License version 2. This program is licensed "as is" without any -* warranty of any kind, whether express or implied. -*/ - -#ifndef __PLAT_TIMEX_H -#define __PLAT_TIMEX_H - -#define CLOCK_TICK_RATE 48000000 - -#endif /* __PLAT_TIMEX_H */
arch/arm/mach-versatile/include/mach/timex.h deleted +0 -23
@@ -1,23 +0,0 @@ -/* -* arch/arm/mach-versatile/include/mach/timex.h -* -* Versatile architecture timex specifications -* -* Copyright (C) 2003 ARM Limited -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#define CLOCK_TICK_RATE (50000000 / 16)
arch/arm/mach-w90x900/include/mach/timex.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* arch/arm/mach-w90x900/include/mach/timex.h -* -* Copyright (c) 2008 Nuvoton technology corporation -* All rights reserved. -* -* Wan ZongShun <[email protected]> -* -* Based on arch/arm/mach-s3c2410/include/mach/timex.h -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/plat-omap/include/plat/timex.h deleted +0 -33
@@ -1,33 +0,0 @@ -/* -* arch/arm/plat-omap/include/mach/timex.h -* -* Copyright (C) 2000 RidgeRun, Inc. -* Author: Greg Lonnon <[email protected]> -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the -* Free Software Foundation; either version 2 of the License, or (at your -* option) any later version. -* -* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -#define CLOCK_TICK_RATE (HZ * 100000UL) - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */
Signature · 1 line
1.8.4.3