Display adjacent switch port's attributes
Subsystems (5)
cover Display adjacent switch port's attributes
This patch series adds a new option to ethtool to display the adjacent switch port's attributes, as perceived by the NIC, e.g. through respective LLDP message exchanges.
A patch for the qeth device driver provides a sample exploiter for the new functionality.
Best regards,
Stefan Raspl
PATCH 1/3 ethtool: Add callback to indicate adjacent switch port attributes
Switches supporting LLDP can communicate port attributes to connected devices. Device drivers capable of accessing this information from the devices can use the new callback get_switch_port_attrs() to report supported and enabled settings in the card's adjacent switch port for display in ethtool. Implementors have to use the respective SUPPORTED_SP_* and ENABLED_SP_* defines to indicate the current settings.
--- include/linux/ethtool.h | 3 +++ include/uapi/linux/ethtool.h | 35 +++++++++++++++++++++++++++++++++++ net/core/ethtool.c | 22 ++++++++++++++++++++++ 3 files changed, 60 insertions(+)
include/linux/ethtool.h +3 -0
@@ -177,6 +177,7 @@ static inline u32 ethtool_rxfh_indir_def* @get_module_eeprom: Get the eeprom information from the plug-in module * @get_eee: Get Energy-Efficient (EEE) supported and status. * @set_eee: Set EEE status (enable/disable) as well as LPI timers. +* @get_switch_port_attrs: Get adjacent switch port attributes. * * All operations are optional (i.e. the function pointer may be set * to %NULL) and callers must take this into account. Callers must
@@ -245,6 +246,8 @@ struct ethtool_ops { struct ethtool_eeprom *, u8 *);int (*get_eee)(struct net_device *,struct ethtool_eee *);int (*set_eee)(struct net_device *,struct ethtool_eee *); +int (*get_switch_port_attrs)(struct net_device *, +struct ethtool_swport_attrs *); };
include/uapi/linux/ethtool.h +35 -0
@@ -136,6 +136,22 @@ struct ethtool_eeprom { };/** +* struct ethtool_swport_attrs - query adjacent switch port attributes +* @cmd: ETHTOOL_GPORT +* @port_rc: Use GPORT_RC_* as appropriate. +* @supported: Forwarding modes and capabilities supported by the switch port, +* see SUPPORTED_SP_* flags. +* @enabled: Forwarding modes and capabilities currently activated at the +* adjacent switch port, see ENABLED_SP_* flags. +*/ +struct ethtool_swport_attrs { +__u32 cmd; +__u32 port_rc; +__u32 supported; +__u32 enabled; +}; + +/** * struct ethtool_eee - Energy Efficient Ethernet information * @cmd: ETHTOOL_{G,S}EEE * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
@@ -900,6 +916,7 @@ enum ethtool_sfeatures_retval_bits {#define ETHTOOL_GMODULEEEPROM 0x00000043/* Get plug-in module eeprom */ #define ETHTOOL_GEEE 0x00000044/* Get EEE settings */ #define ETHTOOL_SEEE 0x00000045/* Set EEE settings */ +#define ETHTOOL_GPORT 0x00000046/* Get switch port attributes */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1067,6 +1084,24 @@ enum ethtool_sfeatures_retval_bits {#define ETH_MODULE_SFF_8472 0x2#define ETH_MODULE_SFF_8472_LEN 512 +/* Bad return codes for switch ports */ +#define GPORT_RC_LLDP_UNSUP 1/* switch port doesn't support */ +/* required LLDP EVB TLV */ + +/* Indicates what features the adjacent switch port supports. */ +#define SUPPORTED_SP_FWD_802_1 (1 << 0) +#define SUPPORTED_SP_FWD_RR (1 << 1) +#define SUPPORTED_SP_CAP_RTE (1 << 9) +#define SUPPORTED_SP_CAP_ECP (1 << 10) +#define SUPPORTED_SP_CAP_VDP (1 << 11) + +/* Indicates what features the adjacent switch port has enabled. */ +#define ENABLED_SP_FWD_802_1 (1 << 0) +#define ENABLED_SP_FWD_RR (1 << 1) +#define ENABLED_SP_CAP_RTE (1 << 9) +#define ENABLED_SP_CAP_ECP (1 << 10) +#define ENABLED_SP_CAP_VDP (1 << 11) +/* Reset flags */ /* The reset() operation must clear the flags for the components which * were actually reset. On successful return, the flags indicate the
net/core/ethtool.c +22 -0
@@ -1446,6 +1446,25 @@ static int ethtool_get_module_eeprom(str modinfo.eeprom_len); } +static int ethtool_get_switch_port_attrs (struct net_device *dev, +void __user *useraddr) +{ +struct ethtool_swport_attrs attrs = {ETHTOOL_GPORT }; +int rc; + +if (!dev->ethtool_ops->get_switch_port_attrs) +return -EOPNOTSUPP ; + + rc = dev->ethtool_ops->get_switch_port_attrs (dev, &attrs); +if (rc) +return rc; + +if (copy_to_user (useraddr, &attrs,sizeof (attrs))) +return -EFAULT ; + +return 0 ; +} +/* The main entry point in this file. Called from net/core/dev_ioctl.c */ int dev_ethtool (struct net *net,struct ifreq *ifr)
@@ -1675,6 +1694,9 @@ int dev_ethtool(struct net *net, structcase ETHTOOL_GMODULEEEPROM : rc =ethtool_get_module_eeprom (dev, useraddr);break ; +case ETHTOOL_GPORT : + rc =ethtool_get_switch_port_attrs (dev, useraddr); +break ;default : rc = -EOPNOTSUPP ; }
PATCH 2/3 ethtool: Add option -q to display adjacent switch ports attributes
In reply to [email protected]Add new option '-q|--query-switch-port' to display information on the adjacent switch port's settings as perceived by the respective NIC. In the output,
- unsupported attributes are indicated as such ('unsupported'),
- supported but disabled attributes display 'no', and
- enabled attributes display 'yes'.
Attributes supported by this patch are
- forwarding modes:
standard (802.1) and reflective relay (RR) aka hairpin
- edge virtual bridging (EVB) related capabilities:
edge control protocol (ECP), VSI discovery and configuration protocol (VDP), and retransmission timer exponent (RTE).
--- ethtool-copy.h | 35 +++++++++++++++++++++++++++++ ethtool.8 | 6 +++++ ethtool.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 109 insertions(+)
ethtool-copy.h +35 -0
@@ -348,6 +348,22 @@ struct ethtool_pauseparam {__u32 tx_pause; }; +/** +* struct ethtool_swport_attrs - query adjacent switch port attributes +* @cmd: ETHTOOL_GPORT +* @port_rc: Use GPORT_RC_* as appropriate. +* @supported: Forwarding modes and capabilities supported by the switch port, +* see SUPPORTED_SP_* flags. +* @enabled: Forwarding modes and capabilities currently activated at the +* adjacent switch port, see ENABLED_SP_* flags. +*/ +struct ethtool_swport_attrs { +__u32 cmd; +__u32 port_rc; +__u32 supported; +__u32 enabled; +}; +#define ETH_GSTRING_LEN 32enum ethtool_stringset {ETH_SS_TEST =0 ,
@@ -900,6 +916,7 @@ enum ethtool_sfeatures_retval_bits {#define ETHTOOL_GMODULEEEPROM 0x00000043/* Get plug-in module eeprom */ #define ETHTOOL_GEEE 0x00000044/* Get EEE settings */ #define ETHTOOL_SEEE 0x00000045/* Set EEE settings */ +#define ETHTOOL_GPORT 0x00000046/* Get switch port attributes */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET
@@ -1067,6 +1084,24 @@ enum ethtool_sfeatures_retval_bits {#define ETH_MODULE_SFF_8472 0x2#define ETH_MODULE_SFF_8472_LEN 512 +/* Bad return codes for switch ports */ +#define GPORT_RC_LLDP_UNSUP 1/* switch port doesn't support */ +/* required LLDP EVB TLV */ + +/* Indicates what features the adjacent switch port supports. */ +#define SUPPORTED_SP_FWD_802_1 (1 << 0) +#define SUPPORTED_SP_FWD_RR (1 << 1) +#define SUPPORTED_SP_CAP_RTE (1 << 9) +#define SUPPORTED_SP_CAP_ECP (1 << 10) +#define SUPPORTED_SP_CAP_VDP (1 << 11) + +/* Indicates what features the adjacent switch port has enabled. */ +#define ENABLED_SP_FWD_802_1 (1 << 0) +#define ENABLED_SP_FWD_RR (1 << 1) +#define ENABLED_SP_CAP_RTE (1 << 9) +#define ENABLED_SP_CAP_ECP (1 << 10) +#define ENABLED_SP_CAP_VDP (1 << 11) +/* Reset flags */ /* The reset() operation must clear the flags for the components which * were actually reset. On successful return, the flags indicate the
ethtool.8 +6 -0
@@ -214,6 +214,9 @@ ethtool \- query or control network driv .B ethtool \-P|\-\-show\-permaddr .I devname .HP +.B ethtool \-q|\-\-query-switch-port +.I devname +.HP .B ethtool \-r|\-\-negotiate .I devname .HP
@@ -485,6 +488,9 @@ Length of time to perform phys-id, in se .B \-P \-\-show\-permaddr Queries the specified network device for permanent hardware address. .TP +.B \-q \-\-query-switch-port +Queries the specified Ethernet device for adjacent switch port's attributes. +.TP .B \-r \-\-negotiate Restarts auto-negotiation on the specified Ethernet device, if auto-negotiation is enabled.
ethtool.c +68 -0
86 lines not on this page · raw message
PATCH 3/3 qeth: Display adjacent switch port attributes in ethtool
In reply to [email protected]Add support for get_switch_port_attrs() callback in ethtool to display adjacent switch port's attributes.
--- drivers/s390/net/qeth_core.h | 2 drivers/s390/net/qeth_core_main.c | 79 ++++++++++++++++++++++++++++++++++++++ drivers/s390/net/qeth_core_mpc.h | 17 ++++++++ drivers/s390/net/qeth_l2_main.c | 1 drivers/s390/net/qeth_l3_main.c | 1 5 files changed, 100 insertions(+)
drivers/s390/net/qeth_core.h +2 -0
@@ -914,6 +914,8 @@ struct qeth_cmd_buffer *qeth_wait_for_buint qeth_mdio_read (struct net_device *,int ,int );int qeth_snmp_command (struct qeth_card *,char __user *);int qeth_query_oat_command (struct qeth_card *,char __user *); +int qeth_core_ethtool_get_switch_port_attrs (struct net_device *, +struct ethtool_swport_attrs *);int qeth_send_control_data (struct qeth_card *,int ,struct qeth_cmd_buffer *,int (*reply_cb)(struct qeth_card *,struct qeth_reply *,unsigned long ),void *reply_param);
drivers/s390/net/qeth_core_main.c +79 -0
91 lines not on this page · raw message
drivers/s390/net/qeth_core_mpc.h +17 -0
@@ -240,6 +240,7 @@ enum qeth_ipa_setadp_cmd {IPA_SETADP_SET_DIAG_ASSIST =0x00002000L ,IPA_SETADP_SET_ACCESS_CONTROL =0x00010000L ,IPA_SETADP_QUERY_OAT =0x00080000L , + IPA_SETADP_QUERY_SWITCH_ATTRIBUTES = 0x00100000L, };enum qeth_ipa_mac_ops { CHANGE_ADDR_READ_MAC = 0,
@@ -404,6 +405,21 @@ struct qeth_qoat_priv {char *buffer; }; +#define QETH_SWITCH_FORW_802_1 0x00000001 +#define QETH_SWITCH_FORW_REFL_RELAY 0x00000002 +#define QETH_SWITCH_CAP_RTE 0x00000004 +#define QETH_SWITCH_CAP_ECP 0x00000008 +#define QETH_SWITCH_CAP_VDP 0x00000010 + +struct qeth_query_switch_attributes { +__u8 version; +__u8 reserved1; +__u16 reserved2; +__u32 capabilities; +__u32 settings; +__u8 reserved3[8 ]; +}; +struct qeth_ipacmd_setadpparms_hdr {__u32 supp_hw_cmds;__u32 reserved1;
@@ -424,6 +440,7 @@ struct qeth_ipacmd_setadpparms {struct qeth_snmp_cmd snmp;struct qeth_set_access_ctrl set_access_ctrl;struct qeth_query_oat query_oat; +struct qeth_query_switch_attributes query_switch_attributes;__u32 mode; } data; } __attribute__ ((packed));
drivers/s390/net/qeth_l2_main.c +1 -0
@@ -911,6 +911,7 @@ static const struct ethtool_ops qeth_l2_ .get_sset_count = qeth_core_get_sset_count, .get_drvinfo = qeth_core_get_drvinfo, .get_settings = qeth_core_ethtool_get_settings, + .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs, };static const struct ethtool_ops qeth_l2_osn_ops = {
drivers/s390/net/qeth_l3_main.c +1 -0
@@ -3198,6 +3198,7 @@ static const struct ethtool_ops qeth_l3_ .get_sset_count = qeth_core_get_sset_count, .get_drvinfo = qeth_core_get_drvinfo, .get_settings = qeth_core_ethtool_get_settings, + .get_switch_port_attrs = qeth_core_ethtool_get_switch_port_attrs, };/*
drivers/s390/net/qeth_core.h +5 -0
@@ -738,6 +738,11 @@ struct qeth_rx {int qdio_err; }; +struct qeth_switch_info { +__u32 capabilities; +__u32 settings; +}; +#define QETH_NAPI_WEIGHT NAPI_POLL_WEIGHTstruct qeth_card {
Am 09.12.2013 09:11, schrieb [email protected]:
Quoted 6 lines
This patch series adds a new option to ethtool to display the adjacent switch port's attributes, as perceived by the NIC, e.g. through respective LLDP message exchanges.
A patch for the qeth device driver provides a sample exploiter for the new functionality.
Quoted 9 lines
Best regards,
Stefan Raspl--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please ignore this stray patch series - the one posted 12/12 is the real thing.
Regards
Stefan Raspl
Signature · 6 lines
Linux on System z & Virtualization Development IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martina Koederitz Geschäftsführer: Dirk Wittkopp Sitz der Gesellschaft: Böblingen Registergericht: Amtsgericht Stuttgart, HRB 243294