arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
Subsystems (3)
PATCH RESEND v2 1/1 arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
KVM initialisation fails on architectures implementing virt_to_idmap() because virt_to_phys() on such architectures won't fetch you the correct idmap page.
So update the KVM ARM code to use the virt_to_idmap() to fix the issue. Since the KVM code is shared between arm and arm64, we create kvm_virt_to_phys() and handle the redirection in respective headers.
---
Update the earlier version as per Marc's suggestion
arch/arm/include/asm/kvm_mmu.h | 1 + arch/arm/kvm/mmu.c | 8 ++++---- arch/arm64/include/asm/kvm_mmu.h | 1 + 3 files changed, 6 insertions(+), 4 deletions(-)
arch/arm/include/asm/kvm_mmu.h +1 -0
@@ -140,6 +140,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __cpuc_flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) virt_to_idmap((unsigned long)(x))#endif /* !__ASSEMBLY__ */
arch/arm/kvm/mmu.c +4 -4
@@ -916,9 +916,9 @@ int kvm_mmu_init(void) {int err; - hyp_idmap_start =virt_to_phys (__hyp_idmap_text_start); - hyp_idmap_end =virt_to_phys (__hyp_idmap_text_end); - hyp_idmap_vector =virt_to_phys (__kvm_hyp_init); + hyp_idmap_start =kvm_virt_to_phys (__hyp_idmap_text_start); + hyp_idmap_end =kvm_virt_to_phys (__hyp_idmap_text_end); + hyp_idmap_vector =kvm_virt_to_phys (__kvm_hyp_init);if ((hyp_idmap_start ^ hyp_idmap_end) &PAGE_MASK ) {/*
@@ -945,7 +945,7 @@ int kvm_mmu_init(void)*/ kvm_flush_dcache_to_poc (init_bounce_page, len); - phys_base =virt_to_phys (init_bounce_page); + phys_base =kvm_virt_to_phys (init_bounce_page); hyp_idmap_vector += phys_base - hyp_idmap_start; hyp_idmap_start = phys_base; hyp_idmap_end = phys_base + len;
arch/arm64/include/asm/kvm_mmu.h +1 -0
@@ -136,6 +136,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) __virt_to_phys((unsigned long)(x))#endif /* __ASSEMBLY__ */ #endif /* __ARM64_KVM_MMU_H__ */
Signature · 1 line
1.7.9.5
PATCH RESEND v2 1/1 arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
Christoffer,
Quoted 8 lines · Santosh Shilimkar
KVM initialisation fails on architectures implementing
virt_to_idmap()becausevirt_to_phys()on such architectures won't fetch you the correct idmap page.So update the KVM ARM code to use the
virt_to_idmap()to fix the issue. Since the KVM code is shared between arm and arm64, we createkvm_virt_to_phys()and handle the redirection in respective headers.
Quoted 7 lines
Cc Christoffer Dall <[email protected]>Cc Marc Zyngier <[email protected]>Cc Catalin Marinas <[email protected]>Signed-off-by Santosh Shilimkar <[email protected]>---
Update the earlier version as per Marc's suggestion
Have you picked this up for 3.14 ?
Quoted 56 lines
arch/arm/include/asm/kvm_mmu.h | 1 + arch/arm/kvm/mmu.c | 8 ++++---- arch/arm64/include/asm/kvm_mmu.h | 1 + 3 files changed, 6 insertions(+), 4 deletions(-)arch/arm/include/asm/kvm_mmu.h +1
-0@@ -140,6 +140,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __cpuc_flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) virt_to_idmap((unsigned long)(x))#endif /* !__ASSEMBLY__ */ arch/arm/kvm/mmu.c +4
-4@@ -916,9 +916,9 @@ int kvm_mmu_init(void) {int err; - hyp_idmap_start =virt_to_phys (__hyp_idmap_text_start); - hyp_idmap_end =virt_to_phys (__hyp_idmap_text_end); - hyp_idmap_vector =virt_to_phys (__kvm_hyp_init); + hyp_idmap_start =kvm_virt_to_phys (__hyp_idmap_text_start); + hyp_idmap_end =kvm_virt_to_phys (__hyp_idmap_text_end); + hyp_idmap_vector =kvm_virt_to_phys (__kvm_hyp_init);if ((hyp_idmap_start ^ hyp_idmap_end) &PAGE_MASK ) {/* @@ -945,7 +945,7 @@ int kvm_mmu_init(void)*/ kvm_flush_dcache_to_poc (init_bounce_page, len); - phys_base =virt_to_phys (init_bounce_page); + phys_base =kvm_virt_to_phys (init_bounce_page); hyp_idmap_vector += phys_base - hyp_idmap_start; hyp_idmap_start = phys_base; hyp_idmap_end = phys_base + len;arch/arm64/include/asm/kvm_mmu.h +1
-0@@ -136,6 +136,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) __virt_to_phys((unsigned long)(x))#endif /* __ASSEMBLY__ */ #endif /* __ARM64_KVM_MMU_H__ */
PATCH RESEND v2 1/1 arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
Quoted 11 lines · Santosh Shilimkar
Christoffer,
Quoted 8 lines · Santosh Shilimkar
KVM initialisation fails on architectures implementing
virt_to_idmap()becausevirt_to_phys()on such architectures won't fetch you the correct idmap page.So update the KVM ARM code to use the
virt_to_idmap()to fix the issue. Since the KVM code is shared between arm and arm64, we createkvm_virt_to_phys()and handle the redirection in respective headers.
Quoted 9 lines
Quoted 7 lines
Cc Christoffer Dall <[email protected]>Cc Marc Zyngier <[email protected]>Cc Catalin Marinas <[email protected]>Signed-off-by Santosh Shilimkar <[email protected]>---
Update the earlier version as per Marc's suggestionHave you picked this up for 3.14 ?
Actually, I was waiting for Marc to ack this one. Marc?
-Christoffer
Quoted 57 lines
Quoted 56 lines
arch/arm/include/asm/kvm_mmu.h | 1 + arch/arm/kvm/mmu.c | 8 ++++---- arch/arm64/include/asm/kvm_mmu.h | 1 + 3 files changed, 6 insertions(+), 4 deletions(-)arch/arm/include/asm/kvm_mmu.h +1
-0@@ -140,6 +140,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __cpuc_flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) virt_to_idmap((unsigned long)(x))#endif /* !__ASSEMBLY__ */ arch/arm/kvm/mmu.c +4
-4@@ -916,9 +916,9 @@ int kvm_mmu_init(void) {int err; - hyp_idmap_start =virt_to_phys (__hyp_idmap_text_start); - hyp_idmap_end =virt_to_phys (__hyp_idmap_text_end); - hyp_idmap_vector =virt_to_phys (__kvm_hyp_init); + hyp_idmap_start =kvm_virt_to_phys (__hyp_idmap_text_start); + hyp_idmap_end =kvm_virt_to_phys (__hyp_idmap_text_end); + hyp_idmap_vector =kvm_virt_to_phys (__kvm_hyp_init);if ((hyp_idmap_start ^ hyp_idmap_end) &PAGE_MASK ) {/* @@ -945,7 +945,7 @@ int kvm_mmu_init(void)*/ kvm_flush_dcache_to_poc (init_bounce_page, len); - phys_base =virt_to_phys (init_bounce_page); + phys_base =kvm_virt_to_phys (init_bounce_page); hyp_idmap_vector += phys_base - hyp_idmap_start; hyp_idmap_start = phys_base; hyp_idmap_end = phys_base + len;arch/arm64/include/asm/kvm_mmu.h +1
-0@@ -136,6 +136,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva, }#define kvm_flush_dcache_to_poc (a,l) __flush_dcache_area((a), (l)) +#define kvm_virt_to_phys (x) __virt_to_phys((unsigned long)(x))#endif /* __ASSEMBLY__ */ #endif /* __ARM64_KVM_MMU_H__ */
Signature · 1 line
Christoffer
PATCH RESEND v2 1/1 arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
Quoted 19 lines · Christoffer Dall
Quoted 18 lines · Santosh Shilimkar
Christoffer,
Quoted 15 lines · Santosh Shilimkar
KVM initialisation fails on architectures implementing
virt_to_idmap()becausevirt_to_phys()on such architectures won't fetch you the correct idmap page.So update the KVM ARM code to use the
virt_to_idmap()to fix the issue. Since the KVM code is shared between arm and arm64, we createkvm_virt_to_phys()and handle the redirection in respective headers.Cc Christoffer Dall <[email protected]>Cc Marc Zyngier <[email protected]>Cc Catalin Marinas <[email protected]>Signed-off-by Santosh Shilimkar <[email protected]>---
Update the earlier version as per Marc's suggestion
Quoted 4 lines
Quoted 2 lines
Have you picked this up for 3.14 ?
Actually, I was waiting for Marc to ack this one. Marc?
M.
Signature · 1 line
Jazz is not dead. It just smells funny...
Christoffer Dall
AppliedPATCH RESEND v2 1/1 arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings
Quoted 20 lines · Marc Zyngier
Quoted 19 lines · Christoffer Dall
Quoted 18 lines · Santosh Shilimkar
Christoffer,
Quoted 15 lines · Santosh Shilimkar
KVM initialisation fails on architectures implementing
virt_to_idmap()becausevirt_to_phys()on such architectures won't fetch you the correct idmap page.So update the KVM ARM code to use the
virt_to_idmap()to fix the issue. Since the KVM code is shared between arm and arm64, we createkvm_virt_to_phys()and handle the redirection in respective headers.Cc Christoffer Dall <[email protected]>Cc Marc Zyngier <[email protected]>Cc Catalin Marinas <[email protected]>Signed-off-by Santosh Shilimkar <[email protected]>---
Update the earlier version as per Marc's suggestion
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Have you picked this up for 3.14 ?
Actually, I was waiting for Marc to ack this one. Marc?
Acked-by Marc Zyngier <[email protected]>M.
Thanks, applied.
-Christoffer