ARM: sunxi: Fix interrupt trigger types in the DT
Subsystems (2)
cover ARM: sunxi: Fix interrupt trigger types in the DT
Hi Kevin, Olof,
It would be great if you could merge these two patches by the end of the 3.13 release cycle.
Thanks!
Maxime
Resent CC'ing stable.
Maxime Ripard (2):
ARM: sun7i: dt: Fix interrupt trigger types
ARM: sun6i: dt: Fix interrupt trigger types
arch/arm/boot/dts/sun6i-a31.dtsi | 27 ++++++++++++++------------ arch/arm/boot/dts/sun7i-a20.dtsi | 42 ++++++++++++++++++++-------------------- 2 files changed, 36 insertions(+), 33 deletions(-)
Signature · 1 line
1.8.4.2
PATCH RESEND 1/2 ARM: sun7i: dt: Fix interrupt trigger types
The Allwinner A20 uses the ARM GIC as its internal interrupts controller. The GIC can work on several interrupt triggers, and the A20 was actually setting it up to use a rising edge as a trigger, while it was actually a level high trigger, leading to some interrupts that would be completely ignored if the edge was missed.
--- arch/arm/boot/dts/sun7i-a20.dtsi | 42 ++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 21 deletions(-)
arch/arm/boot/dts/sun7i-a20.dtsi +21 -21
@@ -170,7 +170,7 @@ emac: ethernet at 01c0b000 { compatible = "allwinner,sun4i-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 1>; + interrupts = <0 55 4>; clocks = <&ahb_gates 17>; status = "disabled"; };
@@ -186,7 +186,7 @@ pio: pinctrl at 01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 1>; + interrupts = <0 28 4>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller;
@@ -251,12 +251,12 @@ timer at 01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 1>, - <0 23 1>, - <0 24 1>, - <0 25 1>, - <0 67 1>, - <0 68 1>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; clocks = <&osc24M>; };
@@ -273,7 +273,7 @@ uart0: serial at 01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@ uart1: serial at 01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@ uart2: serial at 01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@ uart3: serial at 01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@ uart4: serial at 01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 1>; + interrupts = <0 17 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@ uart5: serial at 01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 1>; + interrupts = <0 18 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@ uart6: serial at 01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 1>; + interrupts = <0 19 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@ uart7: serial at 01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 1>; + interrupts = <0 20 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@ i2c0: i2c at 01c2ac00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 1>; + interrupts = <0 7 4>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled";
@@ -362,7 +362,7 @@ i2c1: i2c at 01c2b000 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 1>; + interrupts = <0 8 4>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled";
@@ -371,7 +371,7 @@ i2c2: i2c at 01c2b400 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 1>; + interrupts = <0 9 4>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled";
@@ -380,7 +380,7 @@ i2c3: i2c at 01c2b800 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 1>; + interrupts = <0 88 4>; clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled";
@@ -389,7 +389,7 @@ i2c4: i2c at 01c2bc00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2bc00 0x400>; - interrupts = <0 89 1>; + interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled";
Signature · 1 line
1.8.4.2
PATCH RESEND 2/2 ARM: sun6i: dt: Fix interrupt trigger types
In reply to Maxime RipardThe Allwinner A31 uses the ARM GIC as its internal interrupts controller. The GIC can work on several interrupt triggers, and the A31 was actually setting it up to use a rising edge as a trigger, while it was actually a level high trigger, leading to some interrupts that would be completely ignored if the edge was missed.
--- arch/arm/boot/dts/sun6i-a31.dtsi | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
arch/arm/boot/dts/sun6i-a31.dtsi +15 -12
@@ -193,7 +193,10 @@ pio: pinctrl at 01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller;
@@ -212,11 +215,11 @@ timer at 01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 1>, - <0 19 1>, - <0 20 1>, - <0 21 1>, - <0 22 1>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>; clocks = <&osc24M>; };
@@ -228,7 +231,7 @@ uart0: serial at 01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 1>; + interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@ uart1: serial at 01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@ uart2: serial at 01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@ uart3: serial at 01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@ uart4: serial at 01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@ uart5: serial at 01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 1>; + interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>;
Signature · 1 line
1.8.4.2
Olof Johansson
Appliedcover ARM: sunxi: Fix interrupt trigger types in the DT
In reply to Maxime RipardQuoted 4 lines · Maxime Ripard
Hi Kevin, Olof,
It would be great if you could merge these two patches by the end of the 3.13 release cycle.
Applied.
Thanks,
-Olof