Refactor PCI/SHPC/PCIE hotplug to use a more generic hotplug API
v2 cover Refactor PCI/SHPC/PCIE hotplug to use a more generic hotplug API
Refactor PCI specific hotplug API to a more generic/reusable one. Model it after SCSI-BUS like hotplug API replacing single hotplug callback with hotplug/hot_unplug pair of callbacks as suggested by Paolo.
Difference between SCSI-BUS and this approach is that the former is BUS centric while the latter is device centred. Which is evolved from the fact that hotplug callbacks used by ACPI/SHPC/PCIE are implemented by devices rather than by bus and bus serves only as a proxy to forward event to hotplug device.
Memory hotplug also exposes tha same usage pattern hence an attempt to generalize hotplug API.
Refactoring also simplifies wiring of a hotplug device with a bus, all it needs is to set "hotplug-device" link on bus, which would potentially allow to do it from configuration file, there is not need to setup hotplug device callbacks on bus synce it can get them via HOTPLUG_DEVICE API of "hotplug-device" target.
In addition device centred hotplug API may be used by bus-less hotplug implementations as well if it's decided to use link<foo...> instead of bus.
Patches 8-11 are should be merged as one and are split only for simplifying review (they compile fine but PCI hotplug is broken until the last patch is applyed).
git tree for testing:
https://github.com/imammedo/qemu/commits/hotplug_dev_inf_v2
tested only ACPI and PCIE hotplug.
Hervé Poussineau (1):
qom: detect bad reentrance during object_class_foreach
Igor Mammedov (9):
define hotplug interface
qdev: add to BusState "hotplug-handler" link
qdev: add "hotplugable" property to Device
hw/acpi: move typeinfo to the file end
qdev:pci: refactor PCIDevice to use generic "hotplugable" property acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API pci/shpc: convert SHPC hotplug to use hotplug-handler API pci/pcie: convert PCIE hotplug to use hotplug-handler API hw/pci: switch to a generic hotplug handling for PCIDevice
Paolo Bonzini (1):
qom: do not register interface "types" in the type table
hw/acpi/piix4.c | 151 +++++++++++++++++++++------------------- hw/core/Makefile.objs | 1 + hw/core/hotplug.c | 48 +++++++++++++ hw/core/qdev.c | 40 ++++++++++- hw/display/cirrus_vga.c | 2 +- hw/display/qxl.c | 2 +- hw/display/vga-pci.c | 2 +- hw/display/vmware_vga.c | 2 +- hw/i386/acpi-build.c | 6 +- hw/ide/piix.c | 4 +- hw/isa/piix4.c | 2 +- hw/pci-bridge/pci_bridge_dev.c | 9 +++ hw/pci-host/piix.c | 6 +- hw/pci/pci.c | 41 +---------- hw/pci/pcie.c | 73 +++++++++++++------- hw/pci/pcie_port.c | 8 ++ hw/pci/shpc.c | 133 +++++++++++++++++++++++------------ hw/usb/hcd-ehci-pci.c | 2 +- hw/usb/hcd-ohci.c | 2 +- hw/usb/hcd-uhci.c | 2 +- hw/usb/hcd-xhci.c | 2 +- include/hw/hotplug.h | 75 ++++++++++++++++++++ include/hw/pci/pci.h | 13 ---- include/hw/pci/pci_bus.h | 2 - include/hw/pci/pcie.h | 5 ++ include/hw/pci/shpc.h | 8 ++ include/hw/qdev-core.h | 8 ++ qom/object.c | 17 ++++- 28 files changed, 446 insertions(+), 220 deletions(-) create mode 100644 hw/core/hotplug.c create mode 100644 include/hw/hotplug.h
PATCH v2 1/11 qom: do not register interface "types" in the type table
From: Paolo Bonzini <[email protected]>
There should be no need to look them up nor enumerate the interface "types", whose "classes" are really just vtables. Just create the types and add them to the interface list of the parent type.
--- qom/object.c | 13 ++++++++++--- 1 files changed, 10 insertions(+), 3 deletions(-)
qom/object.c +10 -3
@@ -88,7 +88,7 @@ static TypeImpl *type_table_lookup(const char *name)return g_hash_table_lookup (type_table_get (), name); } -static TypeImpl *type_register_internal (const TypeInfo *info) +static TypeImpl *type_new (const TypeInfo *info) {TypeImpl *ti =g_malloc0 (sizeof (*ti));int i;
@@ -122,8 +122,15 @@ static TypeImpl *type_register_internal(const TypeInfo *info) } ti->num_interfaces = i; -type_table_add (ti); +return ti; +} +static TypeImpl *type_register_internal (const TypeInfo *info) +{ +TypeImpl *ti; + ti =type_new (info); + +type_table_add (ti);return ti; }
@@ -216,7 +223,7 @@ static void type_initialize_interface(TypeImpl *ti, const char *parent) info.name =g_strdup_printf ("%s::%s" , ti->name, info.parent); info.abstract = true; - iface_impl =type_register (&info); + iface_impl =type_new (&info);type_initialize (iface_impl);g_free ((char *)info.name);
Signature · 1 line
1.7.1
PATCH v2 2/11 qom: detect bad reentrance during object_class_foreach
In reply to Igor MammedovFrom: Hervé Poussineau <[email protected]>
We should not modify the type hash table while it is being iterated on. Assert that it does not happen.
---
v2:
* make ver more descriptinve s/enumerating/enumerating_classes/ [asked-by: Peter Crosthwaite]
--- qom/object.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
qom/object.c +4 -0
@@ -78,8 +78,10 @@ static GHashTable *type_table_get(void)return type_table; } +static bool enumerating_classes = false;static void type_table_add (TypeImpl *ti) { +assert (!enumerating_classes);g_hash_table_insert (type_table_get (), (void *)ti->name, ti); }
@@ -666,7 +668,9 @@ void object_class_foreach(void (*fn)(ObjectClass *klass, void *opaque), {OCFData data = { fn, implements_type, include_abstract, opaque }; + enumerating_classes = true;g_hash_table_foreach (type_table_get (), object_class_foreach_tramp, &data); + enumerating_classes = false; } int object_child_foreach(Object *obj, int (*fn)(Object *child, void *opaque),
Signature · 1 line
1.7.1
PATCH v2 3/11 define hotplug interface
In reply to Igor MammedovProvide generic hotplug interface for devices. Intended for replacing hotplug mechanism used by PCI/PCIE/SHPC code and will be used for memory hotplug.
---
v2:
* s/device/handler/
* add hotplug_handler_plug/hotplug_handler_unplug API
v1:
it's scsi-bus like interface, but abstracted from bus altogether since all current users care about in hotplug handlers, it's hotplug device and hotplugged device and bus only serves as a means to get access to hotplug device and it's callbacks.
--- hw/core/Makefile.objs | 1 + hw/core/hotplug.c | 48 +++++++++++++++++++++++++++++++ include/hw/hotplug.h | 75 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 124 insertions(+), 0 deletions(-) create mode 100644 hw/core/hotplug.c create mode 100644 include/hw/hotplug.h
hw/core/Makefile.objs +1 -0
@@ -2,6 +2,7 @@ common-obj-y += qdev.o qdev-properties.o # irq.o needed for qdev GPIO handling: common-obj-y += irq.o +common-obj-y += hotplug.o common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o common-obj-$(CONFIG_XILINX_AXI) += stream.o
hw/core/hotplug.c new file +48 -0
48 lines not on this page · raw message
include/hw/hotplug.h new file +75 -0
75 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v2 4/11 qdev: add to BusState "hotplug-handler" link
In reply to Igor MammedovIt will allow to reuse field with different BUSes, reducing code duplication. Field is intended fot replacing 'hotplug_qdev' field in PCIBus and also will allow to avoid adding equivalent field to DimmBus with possiblitity to refactor other BUSes to use it instead of custom field.
In addition once all users of allow_hotplug field are converted to new API, link could replace allow_hotplug in qdev hotplug code.
--- hw/core/qdev.c | 4 ++++ include/hw/qdev-core.h | 5 +++++ 2 files changed, 9 insertions(+), 0 deletions(-)
hw/core/qdev.c +4 -0
@@ -32,6 +32,7 @@#include "qapi/visitor.h" #include "qapi/qmp/qjson.h" #include "monitor/monitor.h" +#include "hw/hotplug.h" int qdev_hotplug =0 ;static bool qdev_hot_added = false;
@@ -868,6 +869,9 @@ static void qbus_initfn(Object *obj)BusState *bus =BUS (obj);QTAILQ_INIT (&bus->children); +object_property_add_link (obj,QDEV_HOTPLUG_HANDLER_PROPERTY , +TYPE_HOTPLUG_HANDLER , + (Object **)&bus->hotplug_handler,NULL ); }static char *default_bus_get_fw_dev_path (DeviceState *dev)
include/hw/qdev-core.h +5 -0
@@ -8,6 +8,7 @@#include "qom/object.h" #include "hw/irq.h" #include "qapi/error.h" +#include "hw/hotplug.h" enum {DEV_NVECTORS_UNSPECIFIED =-1 ,
@@ -169,14 +170,18 @@ typedef struct BusChild {QTAILQ_ENTRY (BusChild) sibling; } BusChild; +#define QDEV_HOTPLUG_HANDLER_PROPERTY "hotplug-handler" +/** * BusState: +* @hotplug_device: link to a hotplug device associated with bus. */ struct BusState {Object obj;DeviceState *parent;const char *name;int allow_hotplug; +HotplugHandler *hotplug_handler;int max_index; QTAILQ_HEAD(ChildrenHead, BusChild) children;QLIST_ENTRY (BusState) sibling;
Signature · 1 line
1.7.1
PATCH v2 5/11 qdev: add "hotplugable" property to Device
In reply to Igor MammedovCurrently it's possible to make PCIDevice not hotplugable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.
So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
--- hw/core/qdev.c | 8 ++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)
hw/core/qdev.c +8 -0
@@ -719,6 +719,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +return dc->hotplugable; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);
@@ -736,6 +742,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {
include/hw/qdev-core.h +3 -0
@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages,
@@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;/* callbacks */ void (*reset)(DeviceState *dev);
Signature · 1 line
1.7.1
Re: [Qemu-devel] [PATCH 05/11] qdev: add "hotplugable" property to Device
Il 11/12/2013 02:01, Igor Mammedov ha scritto:
Quoted 58 lines
Currently it's possible to make PCIDevice not hotplugable by using
no_hotplugfield of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
Signed-off-by Igor Mammedov <[email protected]>--- hw/core/qdev.c | 8 ++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)hw/core/qdev.c +8
-0@@ -719,6 +719,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +return dc->hotplugable; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);@@ -736,6 +742,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {include/hw/qdev-core.h +2
-0@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages,
include/hw/qdev-core.h typedef struct DeviceClass { · line 107
Quoted 7 lines
include/hw/qdev-core.h +1
-0@@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;/* callbacks */ void (*reset)(DeviceState *dev);
Does this patch break SCSI and virtio-serial hotplug?
Perhaps you could initialize dc->hotpluggable to true, and return "dc->hotplugable && device->parent_bus->allow_hotplug" from the property getter? Or just set the class to true in the common superclasses of all buses that support hotplug, but that's a bit harder.
Paolo
Re: [Qemu-devel] [PATCH 05/11] qdev: add "hotplugable" property to Device
Quoted 63 lines · On Wed, 11 Dec 2013 17:29:06 +0100 Paolo Bonzini <[email protected]> wrote:
Il 11/12/2013 02:01, Igor Mammedov ha scritto:
Quoted 62 lines
Currently it's possible to make PCIDevice not hotplugable by using
no_hotplugfield of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
Signed-off-by Igor Mammedov <[email protected]>--- hw/core/qdev.c | 8 ++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)hw/core/qdev.c +8
-0@@ -719,6 +719,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +return dc->hotplugable; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);@@ -736,6 +742,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {include/hw/qdev-core.h +3
-0@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages, @@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;
Quoted 5 lines
include/hw/qdev-core.h typedef struct DeviceClass { · line 107
Quoted 3 lines
include/hw/qdev-core.h +0
-0/* callbacks */ void (*reset)(DeviceState *dev);Does this patch break SCSI and virtio-serial hotplug?
Ouch,
this patch doesn't but
"[PATCH 07/11] qdev:pci: refactor PCIDevice to use generic "hotplugable" property" does. See 2 hunks in hw/core/qdev.c
Quoted 2 lines
Perhaps you could initialize
dc->hotpluggableto true, and return
that's probably the easiest way, since before series all devices were considered hotplugable from qdev POV, so it makes sense to make DeviceClass hotplugable by default to avoid unexpected regressions.
Quoted 2 lines
"
dc->hotplugable&&device->parent_bus->allow_hotplug" from the property getter?
sure, since there is no bus-less hotlpug it won't hurt. I'll respin amended patch as reply to this thread if it's ok.
Quoted 2 lines
Or just set the class to true in the common superclasses of all buses that support hotplug, but that's a bit harder.
perhaps exercise for the later.
Quoted 2 lines
Paolo
Signature · 2 lines
Regards, Igor
Re: [Qemu-devel] [PATCH 05/11] qdev: add "hotplugable" property to Device
Il 11/12/2013 17:57, Igor Mammedov ha scritto:
Quoted 71 lines
Quoted 63 lines · On Wed, 11 Dec 2013 17:29:06 +0100 Paolo Bonzini <[email protected]> wrote:
Il 11/12/2013 02:01, Igor Mammedov ha scritto:
Quoted 62 lines
Currently it's possible to make PCIDevice not hotplugable by using
no_hotplugfield of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
Signed-off-by Igor Mammedov <[email protected]>--- hw/core/qdev.c | 8 ++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)hw/core/qdev.c +8
-0@@ -719,6 +719,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +return dc->hotplugable; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);@@ -736,6 +742,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {include/hw/qdev-core.h +3
-0@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages, @@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;Quoted 5 lines
include/hw/qdev-core.h typedef struct DeviceClass { · line 107
Quoted 3 lines
include/hw/qdev-core.h +0
-0/* callbacks */ void (*reset)(DeviceState *dev);Does this patch break SCSI and virtio-serial hotplug?
Quoted 4 lines
Ouch,
this patch doesn't but
"[PATCH 07/11] qdev:pci: refactor PCIDevice to use generic "hotplugable" property" does. See 2 hunks inhw/core/qdev.c
If you set dc->hotpluggable = true, those two hunks could also be moved here.
Paolo
Quoted 19 lines
Quoted 2 lines
Perhaps you could initialize
dc->hotpluggableto true, and returnthat's probably the easiest way, since before series all devices were considered hotplugable from qdev POV, so it makes sense to make DeviceClass hotplugable by default to avoid unexpected regressions.
Quoted 2 lines
"
dc->hotplugable&&device->parent_bus->allow_hotplug" from the property getter?sure, since there is no bus-less hotlpug it won't hurt. I'll respin amended patch as reply to this thread if it's ok.
Quoted 2 lines
Or just set the class to true in the common superclasses of all buses that support hotplug, but that's a bit harder.
perhaps exercise for the later.
Quoted 2 lines
Paolo
Re: [Qemu-devel] [PATCH 05/11] qdev: add "hotplugable" property to Device
Quoted 72 lines · On Wed, 11 Dec 2013 18:02:11 +0100 Paolo Bonzini <[email protected]> wrote:
Il 11/12/2013 17:57, Igor Mammedov ha scritto:
Quoted 71 lines
Quoted 68 lines · On Wed, 11 Dec 2013 17:29:06 +0100 Paolo Bonzini <[email protected]> wrote:
Il 11/12/2013 02:01, Igor Mammedov ha scritto:
Quoted 58 lines
Currently it's possible to make PCIDevice not hotplugable by using
no_hotplugfield of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
Signed-off-by Igor Mammedov <[email protected]>--- hw/core/qdev.c | 8 ++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 11 insertions(+), 0 deletions(-)hw/core/qdev.c +8
-0@@ -719,6 +719,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +return dc->hotplugable; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);@@ -736,6 +742,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {include/hw/qdev-core.h +2
-0@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages, include/hw/qdev-core.h typedef struct DeviceClass { · line 107
Quoted 7 lines
include/hw/qdev-core.h +1
-0@@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;/* callbacks */ void (*reset)(DeviceState *dev);Does this patch break SCSI and virtio-serial hotplug?
Quoted 7 lines
Quoted 4 lines
Ouch,
this patch doesn't but
"[PATCH 07/11] qdev:pci: refactor PCIDevice to use generic "hotplugable" property" does. See 2 hunks inhw/core/qdev.cIf you set
dc->hotpluggable= true, those two hunks could also be moved here.
sure. posting as reply to this thread so not to spam list with series respin. tested with CPU hotplug which was broken too.
Quoted 23 lines
Paolo
Quoted 19 lines
Quoted 2 lines
Perhaps you could initialize
dc->hotpluggableto true, and returnthat's probably the easiest way, since before series all devices were considered hotplugable from qdev POV, so it makes sense to make DeviceClass hotplugable by default to avoid unexpected regressions.
Quoted 2 lines
"
dc->hotplugable&&device->parent_bus->allow_hotplug" from the property getter?sure, since there is no bus-less hotlpug it won't hurt. I'll respin amended patch as reply to this thread if it's ok.
Quoted 2 lines
Or just set the class to true in the common superclasses of all buses that support hotplug, but that's a bit harder.
perhaps exercise for the later.
Quoted 2 lines
Paolo
Signature · 2 lines
Regards, Igor
PATCH v3 5/11 qdev: add "hotplugable" property to Device
In reply to Paolo BonziniCurrently it's possible to make PCIDevice not hotplugable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code.
So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation.
In addition expose field as "hotplugable" readonly property, to make it possible to get it via QOM interface.
v3:
make DeviceClass hotlugable by default. Since PCIDevice still uses internal checks it shouldn't reggress. And follow up patch that converts PCIDevices to use "hotplugable" property will take care about not hotplugable PCI devices explicitly setting "hotplugable" to false in their class_init().
---
v3:
move generic hotplug checks from
"7/11 qdev:pci: refactor PCIDevice to use generic "hotplugable" property" to this patch
--- hw/core/qdev.c | 29 +++++++++++++++++++++++++++++ include/hw/qdev-core.h | 3 +++ 2 files changed, 32 insertions(+)
hw/core/qdev.c +29 -0
@@ -215,6 +215,12 @@ void qdev_unplug(DeviceState *dev, Error **errp) }assert (dc->unplug !=NULL ); +if (!dc->hotplugable) { +error_set (errp,QERR_DEVICE_NO_HOTPLUG , +object_get_typename (OBJECT (dev))); +return ; + } + qdev_hot_removed = true;if (dc->unplug (dev) <0 ) {
@@ -679,6 +685,11 @@ static void device_set_realized(Object *obj, bool value, Error **err)DeviceClass *dc =DEVICE_GET_CLASS (dev);Error *local_err =NULL ; +if (dev->hotplugged && !dc->hotplugable) { +error_set (err,QERR_DEVICE_NO_HOTPLUG ,object_get_typename (obj)); +return ; + } +if (value && !dev->realized) {if (!obj->parent && local_err ==NULL ) {static int unattached_count;
@@ -719,6 +730,14 @@ static void device_set_realized(Object *obj, bool value, Error **err) dev->realized = value; } +static bool device_get_hotplugable (Object *obj,Error **err) +{ +DeviceClass *dc =DEVICE_GET_CLASS (obj); +DeviceState *dev =DEVICE (obj); + +return dc->hotplugable && dev->parent_bus->allow_hotplug; +} +static void device_initfn (Object *obj) {DeviceState *dev =DEVICE (obj);
@@ -736,6 +755,8 @@ static void device_initfn(Object *obj)object_property_add_bool (obj,"realized" , device_get_realized, device_set_realized,NULL ); +object_property_add_bool (obj,"hotplugable" , + device_get_hotplugable,NULL ,NULL ); class =object_get_class (OBJECT (dev)); do {
@@ -784,6 +805,14 @@ static void device_class_base_init(ObjectClass *class, void *data)* so do not propagate them to the subclasses. */ klass->props =NULL ; + +/* by default all devices were considered as hotplugable, +* so with intent to check it in generic qdev_unplug() / +* device_set_realized() functions make every device +* hotplugable. Devices that shouldn't be hoplugable, +* should override it in their class_init() +*/ + klass->hotplugable = true; }static void device_unparent (Object *obj)
include/hw/qdev-core.h +3 -0
@@ -50,6 +50,8 @@ struct VMStateDescription;* is changed to %true. Deprecated, new types inheriting directly from * TYPE_DEVICE should use @realize instead, new leaf types should consult * their respective parent type. +* @hotplugable: booleean indicating if #DeviceClass is hotplugable, available +* as readonly "hotplugable" property of #DeviceState instance * * # Realization # * Devices are constructed in two stages,
@@ -99,6 +101,7 @@ typedef struct DeviceClass {const char *desc;Property *props;int no_user; +bool hotplugable;/* callbacks */ void (*reset)(DeviceState *dev);
Signature · 1 line
1.8.3.1
Re: [Qemu-devel] [PATCH 5/11 v3 FIXED] qdev: add "hotplugable" property to Device
Please spell it "pluggable", both in C identifiers and strings.
Re: [Qemu-devel] [PATCH 5/11 v3 FIXED] qdev: add "hotplugable" property to Device
Quoted 1 line · On Wed, 11 Dec 2013 20:57:43 +0100 Markus Armbruster <[email protected]> wrote:
Please spell it "pluggable", both in C identifiers and strings.
Sure,
I'll respin series since it will touch several patches.
PATCH v2 6/11 hw/acpi: move typeinfo to the file end
In reply to Igor Mammedovdo so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usualy expected.
--- hw/acpi/piix4.c | 80 +++++++++++++++++++++++++++--------------------------- 1 files changed, 40 insertions(+), 40 deletions(-)
hw/acpi/piix4.c +40 -40
@@ -523,46 +523,6 @@ i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,return s->smb.smbus; } -static Property piix4_pm_properties[] = { -DEFINE_PROP_UINT32 ("smb_io_base" , PIIX4PMState, smb_io_base,0 ), -DEFINE_PROP_UINT8 (ACPI_PM_PROP_S3_DISABLED , PIIX4PMState, disable_s3,0 ), -DEFINE_PROP_UINT8 (ACPI_PM_PROP_S4_DISABLED , PIIX4PMState, disable_s4,0 ), -DEFINE_PROP_UINT8 (ACPI_PM_PROP_S4_VAL , PIIX4PMState, s4_val,2 ), -DEFINE_PROP_END_OF_LIST (), -}; - -static void piix4_pm_class_init (ObjectClass *klass,void *data) -{ -DeviceClass *dc =DEVICE_CLASS (klass); -PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - - k->no_hotplug =1 ; - k->init = piix4_pm_initfn; - k->config_write = pm_write_config; - k->vendor_id =PCI_VENDOR_ID_INTEL ; - k->device_id =PCI_DEVICE_ID_INTEL_82371AB_3 ; - k->revision =0x03 ; - k->class_id =PCI_CLASS_BRIDGE_OTHER ; - dc->desc ="PM" ; - dc->no_user =1 ; - dc->vmsd = &vmstate_acpi; - dc->props = piix4_pm_properties; -} - -static const TypeInfo piix4_pm_info = { - .name =TYPE_PIIX4_PM , - .parent =TYPE_PCI_DEVICE , - .instance_size =sizeof (PIIX4PMState), - .class_init = piix4_pm_class_init, -}; - -static void piix4_pm_register_types (void ) -{ -type_register_static (&piix4_pm_info); -} - -type_init (piix4_pm_register_types) -static uint64_t gpe_readb (void *opaque,hwaddr addr,unsigned width) {PIIX4PMState *s = opaque;
@@ -772,3 +732,43 @@ static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,return 0 ; } + +static Property piix4_pm_properties[] = { +DEFINE_PROP_UINT32 ("smb_io_base" , PIIX4PMState, smb_io_base,0 ), +DEFINE_PROP_UINT8 (ACPI_PM_PROP_S3_DISABLED , PIIX4PMState, disable_s3,0 ), +DEFINE_PROP_UINT8 (ACPI_PM_PROP_S4_DISABLED , PIIX4PMState, disable_s4,0 ), +DEFINE_PROP_UINT8 (ACPI_PM_PROP_S4_VAL , PIIX4PMState, s4_val,2 ), +DEFINE_PROP_END_OF_LIST (), +}; + +static void piix4_pm_class_init (ObjectClass *klass,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (klass); +PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); + + k->no_hotplug =1 ; + k->init = piix4_pm_initfn; + k->config_write = pm_write_config; + k->vendor_id =PCI_VENDOR_ID_INTEL ; + k->device_id =PCI_DEVICE_ID_INTEL_82371AB_3 ; + k->revision =0x03 ; + k->class_id =PCI_CLASS_BRIDGE_OTHER ; + dc->desc ="PM" ; + dc->no_user =1 ; + dc->vmsd = &vmstate_acpi; + dc->props = piix4_pm_properties; +} + +static const TypeInfo piix4_pm_info = { + .name =TYPE_PIIX4_PM , + .parent =TYPE_PCI_DEVICE , + .instance_size =sizeof (PIIX4PMState), + .class_init = piix4_pm_class_init, +}; + +static void piix4_pm_register_types (void ) +{ +type_register_static (&piix4_pm_info); +} + +type_init (piix4_pm_register_types)
Signature · 1 line
1.7.1
PATCH v2 7/11 qdev:pci: refactor PCIDevice to use generic "hotplugable" property
In reply to Igor MammedovGet rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotplugable field instead.
Check if hot(un)plug is allowed into common qdev_unplug/device_set_realized, so that inherited classes won't have to do it.
--- hw/acpi/piix4.c | 10 +++++----- hw/core/qdev.c | 11 +++++++++++ hw/display/cirrus_vga.c | 2 +- hw/display/qxl.c | 2 +- hw/display/vga-pci.c | 2 +- hw/display/vmware_vga.c | 2 +- hw/i386/acpi-build.c | 6 +++--- hw/ide/piix.c | 4 ++-- hw/isa/piix4.c | 2 +- hw/pci-host/piix.c | 6 +++--- hw/pci/pci.c | 12 ++---------- hw/usb/hcd-ehci-pci.c | 2 +- hw/usb/hcd-ohci.c | 2 +- hw/usb/hcd-uhci.c | 2 +- hw/usb/hcd-xhci.c | 2 +- include/hw/pci/pci.h | 3 --- 16 files changed, 35 insertions(+), 35 deletions(-)
hw/acpi/piix4.c +5 -5
@@ -323,9 +323,9 @@ static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots) QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {DeviceState *qdev = kid->child;PCIDevice *dev =PCI_DEVICE (qdev); -PCIDeviceClass *pc =PCI_DEVICE_GET_CLASS (dev); +DeviceClass *dc =DEVICE_GET_CLASS (dev);if (PCI_SLOT (dev->devfn) == slot) { -if (pc->no_hotplug) { +if (!dc->hotplugable) { slot_free = false; }else {object_unparent (OBJECT (qdev));
@@ -353,10 +353,10 @@ static void piix4_update_hotplug(PIIX4PMState *s) QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {DeviceState *qdev = kid->child;PCIDevice *pdev =PCI_DEVICE (qdev); -PCIDeviceClass *pc =PCI_DEVICE_GET_CLASS (pdev); +DeviceClass *dc =DEVICE_GET_CLASS (qdev);int slot =PCI_SLOT (pdev->devfn); -if (pc->no_hotplug) { +if (!dc->hotplugable) { s->pci0_hotplug_enable &= ~(1U << slot); }
@@ -746,7 +746,6 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = piix4_pm_initfn; k->config_write = pm_write_config; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -757,6 +756,7 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data) dc->no_user =1 ; dc->vmsd = &vmstate_acpi; dc->props = piix4_pm_properties; + dc->hotplugable = false; }static const TypeInfo piix4_pm_info = {
hw/core/qdev.c +11 -0
@@ -215,6 +215,12 @@ void qdev_unplug(DeviceState *dev, Error **errp) }assert (dc->unplug !=NULL ); +if (!dc->hotplugable) { +error_set (errp,QERR_DEVICE_NO_HOTPLUG , +object_get_typename (OBJECT (dev))); +return ; + } + qdev_hot_removed = true;if (dc->unplug (dev) <0 ) {
@@ -679,6 +685,11 @@ static void device_set_realized(Object *obj, bool value, Error **err)DeviceClass *dc =DEVICE_GET_CLASS (dev);Error *local_err =NULL ; +if (dev->hotplugged && !dc->hotplugable) { +error_set (err,QERR_DEVICE_NO_HOTPLUG ,object_get_typename (obj)); +return ; + } +if (value && !dev->realized) {if (!obj->parent && local_err ==NULL ) {static int unattached_count;
hw/display/cirrus_vga.c +1 -1
@@ -2996,7 +2996,6 @@ static void cirrus_vga_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = pci_cirrus_vga_initfn; k->romfile =VGABIOS_CIRRUS_FILENAME ; k->vendor_id =PCI_VENDOR_ID_CIRRUS ;
@@ -3006,6 +3005,7 @@ static void cirrus_vga_class_init(ObjectClass *klass, void *data) dc->desc ="Cirrus CLGD 54xx VGA" ; dc->vmsd = &vmstate_pci_cirrus_vga; dc->props = pci_vga_cirrus_properties; + dc->hotplugable = false; }static const TypeInfo cirrus_vga_info = {
hw/display/qxl.c +1 -1
@@ -2289,7 +2289,6 @@ static void qxl_primary_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = qxl_init_primary; k->romfile ="vgabios-qxl.bin" ; k->vendor_id =REDHAT_PCI_VENDOR_ID ;
@@ -2300,6 +2299,7 @@ static void qxl_primary_class_init(ObjectClass *klass, void *data) dc->reset = qxl_reset_handler; dc->vmsd = &qxl_vmstate; dc->props = qxl_properties; + dc->hotplugable = false; }static const TypeInfo qxl_primary_info = {
hw/display/vga-pci.c +1 -1
@@ -190,7 +190,6 @@ static void vga_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = pci_std_vga_initfn; k->romfile ="vgabios-stdvga.bin" ; k->vendor_id =PCI_VENDOR_ID_QEMU ;
@@ -198,6 +197,7 @@ static void vga_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_DISPLAY_VGA ; dc->vmsd = &vmstate_vga_pci; dc->props = vga_pci_properties; + dc->hotplugable = false;set_bit (DEVICE_CATEGORY_DISPLAY , dc->categories); }
hw/display/vmware_vga.c +1 -1
@@ -1296,7 +1296,6 @@ static void vmsvga_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = pci_vmsvga_initfn; k->romfile ="vgabios-vmware.bin" ; k->vendor_id =PCI_VENDOR_ID_VMWARE ;
@@ -1307,6 +1306,7 @@ static void vmsvga_class_init(ObjectClass *klass, void *data) dc->reset = vmsvga_reset; dc->vmsd = &vmstate_vmware_vga; dc->props = vga_vmware_properties; + dc->hotplugable = false;set_bit (DEVICE_CATEGORY_DISPLAY , dc->categories); }
hw/i386/acpi-build.c +3 -3
@@ -186,16 +186,16 @@ static void acpi_get_hotplug_info(AcpiMiscInfo *misc) DIV_ROUND_UP(PCI_SLOT_MAX, BITS_PER_BYTE));for (i =0 ; i <ARRAY_SIZE (bus->devices); ++i) { -PCIDeviceClass *pc; +DeviceClass *dc;PCIDevice *pdev = bus->devices[i];if (!pdev) {continue ; } - pc =PCI_DEVICE_GET_CLASS (pdev); + dc =DEVICE_GET_CLASS (pdev); -if (pc->no_hotplug) { +if (!dc->hotplugable) {int slot =PCI_SLOT (i);clear_bit (slot, misc->slot_hotplug_enable);
hw/ide/piix.c +2 -2
@@ -241,7 +241,6 @@ static void piix3_ide_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = pci_piix_ide_initfn; k->exit = pci_piix_ide_exitfn; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -249,6 +248,7 @@ static void piix3_ide_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); dc->no_user =1 ; + dc->hotplugable = false; }static const TypeInfo piix3_ide_info = {
@@ -282,7 +282,6 @@ static void piix4_ide_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = pci_piix_ide_initfn; k->exit = pci_piix_ide_exitfn; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -290,6 +289,7 @@ static void piix4_ide_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); dc->no_user =1 ; + dc->hotplugable = false; }static const TypeInfo piix4_ide_info = {
hw/isa/piix4.c +1 -1
@@ -107,7 +107,6 @@ static void piix4_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = piix4_initfn; k->vendor_id =PCI_VENDOR_ID_INTEL ; k->device_id =PCI_DEVICE_ID_INTEL_82371AB_0 ;
@@ -115,6 +114,7 @@ static void piix4_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->no_user =1 ; dc->vmsd = &vmstate_piix4; + dc->hotplugable = false; }static const TypeInfo piix4_info = {
hw/pci-host/piix.c +3 -3
@@ -654,7 +654,7 @@ static void piix3_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; dc->no_user =1 , - k->no_hotplug =1 ; + dc->hotplugable = false; k->init = piix3_initfn; k->config_write = piix3_write_config; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -678,7 +678,7 @@ static void piix3_xen_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; dc->no_user =1 ; - k->no_hotplug =1 ; + dc->hotplugable = false; k->init = piix3_initfn; k->config_write = piix3_write_config_xen; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -699,7 +699,6 @@ static void i440fx_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); - k->no_hotplug =1 ; k->init = i440fx_initfn; k->config_write = i440fx_write_config; k->vendor_id =PCI_VENDOR_ID_INTEL ;
@@ -709,6 +708,7 @@ static void i440fx_class_init(ObjectClass *klass, void *data) dc->desc ="Host bridge" ; dc->no_user =1 ; dc->vmsd = &vmstate_i440fx; + dc->hotplugable = false; }static const TypeInfo i440fx_info = {
hw/pci/pci.c +2 -10
@@ -1735,11 +1735,7 @@ static int pci_qdev_init(DeviceState *qdev) pci_dev->devfn);if (pci_dev ==NULL )return -1 ; -if (qdev->hotplugged && pc->no_hotplug) { -qerror_report (QERR_DEVICE_NO_HOTPLUG ,object_get_typename (OBJECT (pci_dev))); -do_pci_unregister_device (pci_dev); -return -1 ; - } +if (pc->init) { rc = pc->init (pci_dev);if (rc !=0 ) {
@@ -1774,12 +1770,7 @@ static int pci_qdev_init(DeviceState *qdev)static int pci_unplug_device (DeviceState *qdev) {PCIDevice *dev =PCI_DEVICE (qdev); -PCIDeviceClass *pc =PCI_DEVICE_GET_CLASS (dev); -if (pc->no_hotplug) { -qerror_report (QERR_DEVICE_NO_HOTPLUG ,object_get_typename (OBJECT (dev))); -return -1 ; - }return dev->bus->hotplug (dev->bus->hotplug_qdev, dev,PCI_HOTPLUG_DISABLED ); }
@@ -2258,6 +2249,7 @@ static void pci_device_class_init(ObjectClass *klass, void *data) k->exit = pci_unregister_device; k->bus_type =TYPE_PCI_BUS ; k->props = pci_props; + k->hotplugable = true; }AddressSpace *pci_device_iommu_address_space (PCIDevice *dev)
hw/usb/hcd-ehci-pci.c +1 -1
@@ -123,7 +123,7 @@ static void ehci_class_init(ObjectClass *klass, void *data) k->init = usb_ehci_pci_initfn; k->class_id =PCI_CLASS_SERIAL_USB ; k->config_write = usb_ehci_pci_write_config; - k->no_hotplug =1 ; + dc->hotplugable = false; dc->vmsd = &vmstate_ehci_pci; dc->props = ehci_pci_properties; }
hw/usb/hcd-ohci.c +1 -1
@@ -1993,10 +1993,10 @@ static void ohci_pci_class_init(ObjectClass *klass, void *data) k->vendor_id =PCI_VENDOR_ID_APPLE ; k->device_id =PCI_DEVICE_ID_APPLE_IPID_USB ; k->class_id =PCI_CLASS_SERIAL_USB ; - k->no_hotplug =1 ;set_bit (DEVICE_CATEGORY_USB , dc->categories); dc->desc ="Apple USB Controller" ; dc->props = ohci_pci_properties; + dc->hotplugable = false; }static const TypeInfo ohci_pci_info = {
hw/usb/hcd-uhci.c +1 -1
@@ -1318,7 +1318,7 @@ static void uhci_class_init(ObjectClass *klass, void *data) k->device_id = info->device_id; k->revision = info->revision; k->class_id =PCI_CLASS_SERIAL_USB ; - k->no_hotplug =1 ; + dc->hotplugable = false; dc->vmsd = &vmstate_uhci; dc->props = uhci_properties;set_bit (DEVICE_CATEGORY_USB , dc->categories);
hw/usb/hcd-xhci.c +1 -1
@@ -3798,6 +3798,7 @@ static void xhci_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_xhci; dc->props = xhci_properties; dc->reset = xhci_reset; + dc->hotplugable = false;set_bit (DEVICE_CATEGORY_USB , dc->categories); k->init = usb_xhci_initfn; k->vendor_id =PCI_VENDOR_ID_NEC ;
@@ -3805,7 +3806,6 @@ static void xhci_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_SERIAL_USB ; k->revision =0x03 ; k->is_express =1 ; - k->no_hotplug =1 ; }static const TypeInfo xhci_info = {
include/hw/pci/pci.h +0 -3
@@ -201,9 +201,6 @@ typedef struct PCIDeviceClass {/* pcie stuff */ int is_express;/* is this device pci express? */ -/* device isn't hot-pluggable */ -int no_hotplug; -/* rom bar */ const char *romfile; } PCIDeviceClass;
Signature · 1 line
1.7.1
PATCH v2 8/11 acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
In reply to Igor MammedovSplit piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device.
--- hw/acpi/piix4.c | 73 +++++++++++++++++++++++++++++++------------------------ 1 files changed, 41 insertions(+), 32 deletions(-)
hw/acpi/piix4.c +41 -32
@@ -30,6 +30,8 @@#include "hw/nvram/fw_cfg.h" #include "exec/address-spaces.h" #include "hw/acpi/piix4.h" +#include "qapi/qmp/qerror.h" +#include "hw/hotplug.h" //#define DEBUG
@@ -107,7 +109,7 @@ typedef struct PIIX4PMState { OBJECT_CHECK(PIIX4PMState, (obj), TYPE_PIIX4_PM)static void piix4_acpi_system_hot_add_init (MemoryRegion *parent, -PCIBus *bus,PIIX4PMState *s); +BusState *bus,PIIX4PMState *s);#define ACPI_ENABLE 0xf1#define ACPI_DISABLE 0xf0
@@ -478,7 +480,7 @@ static int piix4_pm_initfn(PCIDevice *dev)qemu_add_machine_init_done_notifier (&s->machine_ready);qemu_register_reset (piix4_reset, s); -piix4_acpi_system_hot_add_init (pci_address_space_io (dev), dev->bus, s); +piix4_acpi_system_hot_add_init (pci_address_space_io (dev),BUS (dev->bus), s);piix4_pm_add_propeties (s);return 0 ;
@@ -664,13 +666,11 @@ static void piix4_cpu_added_req(Notifier *n, void *opaque)piix4_cpu_hotplug_req (s,CPU (opaque),PLUG ); } -static int piix4_device_hotplug (DeviceState *qdev,PCIDevice *dev, -PCIHotplugState state); -static void piix4_acpi_system_hot_add_init (MemoryRegion *parent, -PCIBus *bus,PIIX4PMState *s) +BusState *bus,PIIX4PMState *s) {CPUState *cpu; +Error *local_error =NULL ;memory_region_init_io (&s->io_gpe,OBJECT (s), &piix4_gpe_ops, s,"acpi-gpe0" ,GPE_LEN );
@@ -680,7 +680,14 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, "acpi-pci-hotplug", PCI_HOTPLUG_SIZE);memory_region_add_subregion (parent,PCI_HOTPLUG_ADDR , &s->io_pci); -pci_bus_hotplug (bus, piix4_device_hotplug,DEVICE (s)); +object_property_set_link (OBJECT (bus),OBJECT (s), +QDEV_HOTPLUG_HANDLER_PROPERTY , &local_error); +if (error_is_set (&local_error)) { +qerror_report_err (local_error); +error_free (local_error); +abort (); + } + bus->allow_hotplug =1 ;CPU_FOREACH (cpu) {CPUClass *cc =CPU_GET_CLASS (cpu);
@@ -696,41 +703,36 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,qemu_register_cpu_added_notifier (&s->cpu_added_notifier); } -static void enable_device (PIIX4PMState *s,int slot) +static void piix4_pci_device_hotplug_cb (HotplugHandler *hotplug_dev, +DeviceState *dev,Error **errp) { - s->ar.gpe.sts[0 ] |=PIIX4_PCI_HOTPLUG_STATUS ; - s->pci0_slot_device_present |= (1U << slot); -} - -static void disable_device (PIIX4PMState *s,int slot) -{ - s->ar.gpe.sts[0 ] |=PIIX4_PCI_HOTPLUG_STATUS ; - s->pci0_status.down |= (1U << slot); -} - -static int piix4_device_hotplug (DeviceState *qdev,PCIDevice *dev, -PCIHotplugState state) -{ -int slot =PCI_SLOT (dev->devfn); -PIIX4PMState *s =PIIX4_PM (qdev); +PCIDevice *pci_dev =PCI_DEVICE (dev); +int slot =PCI_SLOT (pci_dev->devfn); +PIIX4PMState *s =PIIX4_PM (hotplug_dev);/* Don't send event when device is enabled during qemu machine creation: * it is present on boot, no hotplug event is necessary. We do send an * event when the device is disabled later. */ -if (state ==PCI_COLDPLUG_ENABLED ) { +if (!dev->hotplugged) { s->pci0_slot_device_present |= (1U << slot); -return 0 ; - } - -if (state ==PCI_HOTPLUG_ENABLED ) { -enable_device (s, slot); - }else { -disable_device (s, slot); +return ; } + s->ar.gpe.sts[0 ] |=PIIX4_PCI_HOTPLUG_STATUS ; + s->pci0_slot_device_present |= (1U << slot);pm_update_sci (s); +} -return 0 ; +static void piix4_pci_device_hot_unplug_cb (HotplugHandler *hotplug_dev, +DeviceState *dev,Error **errp) +{ +PCIDevice *pci_dev =PCI_DEVICE (dev); +int slot =PCI_SLOT (pci_dev->devfn); +PIIX4PMState *s =PIIX4_PM (hotplug_dev); + + s->ar.gpe.sts[0 ] |=PIIX4_PCI_HOTPLUG_STATUS ; + s->pci0_status.down |= (1U << slot); +pm_update_sci (s); }static Property piix4_pm_properties[] = {
@@ -745,6 +747,7 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (klass); k->init = piix4_pm_initfn; k->config_write = pm_write_config;
@@ -757,6 +760,8 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_acpi; dc->props = piix4_pm_properties; dc->hotplugable = false; + hc->plug = piix4_pci_device_hotplug_cb; + hc->unplug = piix4_pci_device_hot_unplug_cb; }static const TypeInfo piix4_pm_info = {
@@ -764,6 +769,10 @@ static const TypeInfo piix4_pm_info = { .parent = TYPE_PCI_DEVICE, .instance_size = sizeof(PIIX4PMState), .class_init = piix4_pm_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } };static void piix4_pm_register_types (void )
Signature · 1 line
1.7.1
PATCH v2 9/11 pci/shpc: convert SHPC hotplug to use hotplug-handler API
In reply to Igor MammedovSplit shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device.
--- hw/pci-bridge/pci_bridge_dev.c | 9 +++ hw/pci/shpc.c | 133 ++++++++++++++++++++++++++-------------- include/hw/pci/shpc.h | 8 +++ 3 files changed, 103 insertions(+), 47 deletions(-)
hw/pci-bridge/pci_bridge_dev.c +9 -0
@@ -26,6 +26,7 @@#include "hw/pci/slotid_cap.h" #include "exec/memory.h" #include "hw/pci/pci_bus.h" +#include "hw/hotplug.h" #define TYPE_PCI_BRIDGE_DEV "pci-bridge"#define PCI_BRIDGE_DEV (obj) \
@@ -136,6 +137,8 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (klass); + k->init = pci_bridge_dev_initfn; k->exit = pci_bridge_dev_exitfn; k->config_write = pci_bridge_dev_write_config;
@@ -148,6 +151,8 @@ static void pci_bridge_dev_class_init(ObjectClass *klass, void *data) dc->props = pci_bridge_dev_properties; dc->vmsd = &pci_bridge_dev_vmstate;set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); + hc->plug = shpc_device_hotplug_cb; + hc->unplug = shpc_device_hot_unplug_cb; }static const TypeInfo pci_bridge_dev_info = {
@@ -155,6 +160,10 @@ static const TypeInfo pci_bridge_dev_info = { .parent = TYPE_PCI_BRIDGE, .instance_size = sizeof(PCIBridgeDev), .class_init = pci_bridge_dev_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } };static void pci_bridge_dev_register (void )
hw/pci/shpc.c +86 -47
172 lines not on this page · raw message
include/hw/pci/shpc.h +8 -0
@@ -4,6 +4,8 @@#include "qemu-common.h" #include "exec/memory.h" #include "migration/vmstate.h" +#include "qapi/error.h" +#include "hw/hotplug.h" struct SHPCDevice {/* Capability offset in device's config space */
@@ -41,6 +43,12 @@ int shpc_init(PCIDevice *dev, PCIBus *sec_bus, MemoryRegion *bar, unsigned off);void shpc_cleanup (PCIDevice *dev,MemoryRegion *bar);void shpc_cap_write_config (PCIDevice *d,uint32_t addr,uint32_t val,int len); + +void shpc_device_hotplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp); +void shpc_device_hot_unplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp); +extern VMStateInfo shpc_vmstate_info;#define SHPC_VMSTATE (_field, _type) \ VMSTATE_BUFFER_UNSAFE_INFO(_field, _type, 0, shpc_vmstate_info, 0)
Signature · 1 line
1.7.1
PATCH v2 10/11 pci/pcie: convert PCIE hotplug to use hotplug-handler API
In reply to Igor MammedovSplit pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device.
--- hw/pci/pcie.c | 73 ++++++++++++++++++++++++++++++++----------------- hw/pci/pcie_port.c | 8 +++++ include/hw/pci/pcie.h | 5 +++ 3 files changed, 61 insertions(+), 25 deletions(-)
hw/pci/pcie.c +48 -25
@@ -26,6 +26,7 @@#include "hw/pci/pci_bus.h" #include "hw/pci/pcie_regs.h" #include "qemu/range.h" +#include "qapi/qmp/qerror.h" //#define DEBUG_PCIE #ifdef DEBUG_PCIE
@@ -216,28 +217,20 @@ static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event)hotplug_event_notify (dev); } -static int pcie_cap_slot_hotplug (DeviceState *qdev, -PCIDevice *pci_dev,PCIHotplugState state) +static void pcie_cap_slot_hotplug_common (PCIDevice *hotplug_dev, +DeviceState *dev, +uint8_t **exp_cap,Error **errp) { -PCIDevice *d =PCI_DEVICE (qdev); -uint8_t *exp_cap = d->config + d->exp.exp_cap; -uint16_t sltsta =pci_get_word (exp_cap +PCI_EXP_SLTSTA ); - -/* Don't send event when device is enabled during qemu machine creation: -* it is present on boot, no hotplug event is necessary. We do send an -* event when the device is disabled later. */ -if (state ==PCI_COLDPLUG_ENABLED ) { -pci_word_test_and_set_mask (exp_cap +PCI_EXP_SLTSTA , -PCI_EXP_SLTSTA_PDS ); -return 0 ; - } +PCIDevice *pci_dev =PCI_DEVICE (dev); + *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; +uint16_t sltsta =pci_get_word (*exp_cap +PCI_EXP_SLTSTA );PCIE_DEV_PRINTF (pci_dev,"hotplug state: %d\n" , state);if (sltsta &PCI_EXP_SLTSTA_EIS ) {/* the slot is electromechanically locked. * This error is propagated up to qdev and then to HMP/QMP. */ -return -EBUSY ; +error_setg_errno (errp, -EBUSY ,"slot is electromechanically locked" ); }/* TODO: multifunction hot-plug.
@@ -245,18 +238,40 @@ static int pcie_cap_slot_hotplug(DeviceState *qdev,* hot plugged/unplugged. */ assert (PCI_FUNC (pci_dev->devfn) ==0 ); +} -if (state ==PCI_HOTPLUG_ENABLED ) { +void pcie_cap_slot_hotplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp) +{ +uint8_t *exp_cap; + +pcie_cap_slot_hotplug_common (PCI_DEVICE (hotplug_dev), dev, &exp_cap, errp); + +/* Don't send event when device is enabled during qemu machine creation: +* it is present on boot, no hotplug event is necessary. We do send an +* event when the device is disabled later. */ +if (!dev->hotplugged) {pci_word_test_and_set_mask (exp_cap +PCI_EXP_SLTSTA ,PCI_EXP_SLTSTA_PDS ); -pcie_cap_slot_event (d,PCI_EXP_HP_EV_PDC ); - }else { -object_unparent (OBJECT (pci_dev)); -pci_word_test_and_clear_mask (exp_cap +PCI_EXP_SLTSTA , -PCI_EXP_SLTSTA_PDS ); -pcie_cap_slot_event (d,PCI_EXP_HP_EV_PDC ); +return ; } -return 0 ; + +pci_word_test_and_set_mask (exp_cap +PCI_EXP_SLTSTA , +PCI_EXP_SLTSTA_PDS ); +pcie_cap_slot_event (PCI_DEVICE (hotplug_dev),PCI_EXP_HP_EV_PDC ); +} + +void pcie_cap_slot_hot_unplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp) +{ +uint8_t *exp_cap; + +pcie_cap_slot_hotplug_common (PCI_DEVICE (hotplug_dev), dev, &exp_cap, errp); + +object_unparent (OBJECT (dev)); +pci_word_test_and_clear_mask (exp_cap +PCI_EXP_SLTSTA , +PCI_EXP_SLTSTA_PDS ); +pcie_cap_slot_event (PCI_DEVICE (hotplug_dev),PCI_EXP_HP_EV_PDC ); }/* pci express slot for pci express root/downstream port
@@ -264,6 +279,8 @@ static int pcie_cap_slot_hotplug(DeviceState *qdev,void pcie_cap_slot_init (PCIDevice *dev,uint16_t slot) {uint32_t pos = dev->exp.exp_cap; +BusState *bus =BUS (pci_bridge_get_sec_bus (PCI_BRIDGE (dev))); +Error *local_error =NULL ;pci_word_test_and_set_mask (dev->config + pos +PCI_EXP_FLAGS ,PCI_EXP_FLAGS_SLOT );
@@ -305,8 +322,14 @@ void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot) dev->exp.hpev_notified = false; -pci_bus_hotplug (pci_bridge_get_sec_bus (PCI_BRIDGE (dev)), - pcie_cap_slot_hotplug, &dev->qdev); +object_property_set_link (OBJECT (bus),OBJECT (dev), +QDEV_HOTPLUG_HANDLER_PROPERTY , &local_error); +if (error_is_set (&local_error)) { +qerror_report_err (local_error); +error_free (local_error); +abort (); + } + bus->allow_hotplug =1 ; }void pcie_cap_slot_reset (PCIDevice *dev)
hw/pci/pcie_port.c +8 -0
@@ -19,6 +19,7 @@*/ #include "hw/pci/pcie_port.h" +#include "hw/hotplug.h" void pcie_port_init_reg (PCIDevice *d) {
@@ -149,8 +150,11 @@ static Property pcie_slot_props[] = {static void pcie_slot_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc); +HotplugHandlerClass *hc =HOTPLUG_HANDLER_CLASS (oc); dc->props = pcie_slot_props; + hc->plug = pcie_cap_slot_hotplug_cb; + hc->unplug = pcie_cap_slot_hot_unplug_cb; }static const TypeInfo pcie_slot_type_info = {
@@ -159,6 +163,10 @@ static const TypeInfo pcie_slot_type_info = { .instance_size = sizeof(PCIESlot), .abstract = true, .class_init = pcie_slot_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } };static void pcie_port_register_types (void )
include/hw/pci/pcie.h +5 -0
@@ -25,6 +25,7 @@#include "hw/pci/pci_regs.h" #include "hw/pci/pcie_regs.h" #include "hw/pci/pcie_aer.h" +#include "hw/hotplug.h" typedef enum { /* for attention and power indicator */
@@ -122,4 +123,8 @@ extern const VMStateDescription vmstate_pcie_device; .offset = vmstate_offset_value(_state, _field, PCIDevice), \ } +void pcie_cap_slot_hotplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp); +void pcie_cap_slot_hot_unplug_cb (HotplugHandler *hotplug_dev,DeviceState *dev, +Error **errp);#endif /* QEMU_PCIE_H */
Signature · 1 line
1.7.1
PATCH v2 11/11 hw/pci: switch to a generic hotplug handling for PCIDevice
In reply to Igor Mammedovmake qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy hotplug method.
--- hw/core/qdev.c | 17 +++++++++++++---- hw/pci/pci.c | 29 +---------------------------- include/hw/pci/pci.h | 10 ---------- include/hw/pci/pci_bus.h | 2 -- 4 files changed, 14 insertions(+), 44 deletions(-)
hw/core/qdev.c +13 -4
@@ -213,7 +213,6 @@ void qdev_unplug(DeviceState *dev, Error **errp)error_set (errp,QERR_BUS_NO_HOTPLUG , dev->parent_bus->name);return ; } -assert (dc->unplug !=NULL );if (!dc->hotplugable) { error_set(errp, QERR_DEVICE_NO_HOTPLUG,
@@ -223,9 +222,13 @@ void qdev_unplug(DeviceState *dev, Error **errp) qdev_hot_removed = true; -if (dc->unplug (dev) <0 ) { -error_set (errp,QERR_UNDEFINED_ERROR ); -return ; +if (dev->parent_bus && dev->parent_bus->hotplug_handler) { +hotplug_handler_unplug (dev->parent_bus->hotplug_handler, dev, errp); + }else { +assert (dc->unplug !=NULL ); +if (dc->unplug (dev) <0 ) {/* legacy handler */ +error_set (errp,QERR_UNDEFINED_ERROR ); + } } }
@@ -705,6 +708,12 @@ static void device_set_realized(Object *obj, bool value, Error **err) dc->realize (dev, &local_err); } +if (dev->parent_bus && dev->parent_bus->hotplug_handler && + local_err ==NULL ) { +hotplug_handler_plug (dev->parent_bus->hotplug_handler, + dev, &local_err); + } +if (qdev_get_vmsd (dev) && local_err ==NULL ) { vmstate_register_with_alias_id(dev, -1, qdev_get_vmsd(dev), dev, dev->instance_id_alias,
hw/pci/pci.c +1 -28
@@ -35,6 +35,7 @@#include "hw/pci/msi.h" #include "hw/pci/msix.h" #include "exec/address-spaces.h" +#include "hw/hotplug.h" //#define DEBUG_PCI #ifdef DEBUG_PCI
@@ -348,13 +349,6 @@ void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq, bus->irq_count =g_malloc0 (nirq *sizeof (bus->irq_count[0 ])); } -void pci_bus_hotplug (PCIBus *bus,pci_hotplug_fn hotplug,DeviceState *qdev) -{ - bus->qbus.allow_hotplug =1 ; - bus->hotplug = hotplug; - bus->hotplug_qdev = qdev; -} - PCIBus *pci_register_bus(DeviceState *parent, const char *name, pci_set_irq_fn set_irq, pci_map_irq_fn map_irq, void *irq_opaque,
@@ -1752,29 +1746,9 @@ static int pci_qdev_init(DeviceState *qdev) }pci_add_option_rom (pci_dev, is_default_rom); -if (bus->hotplug) { -/* Let buses differentiate between hotplug and when device is -* enabled during qemu machine creation. */ - rc = bus->hotplug (bus->hotplug_qdev, pci_dev, - qdev->hotplugged ?PCI_HOTPLUG_ENABLED : -PCI_COLDPLUG_ENABLED ); -if (rc !=0 ) { -int r =pci_unregister_device (&pci_dev->qdev); -assert (!r); -return rc; - } - }return 0 ; } -static int pci_unplug_device (DeviceState *qdev) -{ -PCIDevice *dev =PCI_DEVICE (qdev); - -return dev->bus->hotplug (dev->bus->hotplug_qdev, dev, -PCI_HOTPLUG_DISABLED ); -} -PCIDevice *pci_create_multifunction (PCIBus *bus,int devfn,bool multifunction,const char *name) {
@@ -2245,7 +2219,6 @@ static void pci_device_class_init(ObjectClass *klass, void *data) {DeviceClass *k =DEVICE_CLASS (klass); k->init = pci_qdev_init; - k->unplug = pci_unplug_device; k->exit = pci_unregister_device; k->bus_type =TYPE_PCI_BUS ; k->props = pci_props;
include/hw/pci/pci.h +0 -10
@@ -327,15 +327,6 @@ typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);typedef int (*pci_map_irq_fn )(PCIDevice *pci_dev,int irq_num);typedef PCIINTxRoute (*pci_route_irq_fn )(void *opaque,int pin); -typedef enum { -PCI_HOTPLUG_DISABLED , -PCI_HOTPLUG_ENABLED , -PCI_COLDPLUG_ENABLED , -}PCIHotplugState ; - -typedef int (*pci_hotplug_fn )(DeviceState *qdev,PCIDevice *pci_dev, -PCIHotplugState state); -#define TYPE_PCI_BUS "PCI"#define PCI_BUS (obj) OBJECT_CHECK(PCIBus, (obj), TYPE_PCI_BUS)#define TYPE_PCIE_BUS "PCIE"
@@ -354,7 +345,6 @@ PCIBus *pci_bus_new(DeviceState *parent, const char *name,void pci_bus_irqs (PCIBus *bus,pci_set_irq_fn set_irq,pci_map_irq_fn map_irq,void *irq_opaque,int nirq);int pci_bus_get_irq_level (PCIBus *bus,int irq_num); -void pci_bus_hotplug (PCIBus *bus,pci_hotplug_fn hotplug,DeviceState *dev);/* 0 <= pin <= 3 0 = INTA, 1 = INTB, 2 = INTC, 3 = INTD */ int pci_swizzle_map_irq_fn (PCIDevice *pci_dev,int pin); PCIBus *pci_register_bus(DeviceState *parent, const char *name,
include/hw/pci/pci_bus.h +0 -2
@@ -16,8 +16,6 @@ struct PCIBus {pci_set_irq_fn set_irq;pci_map_irq_fn map_irq;pci_route_irq_fn route_intx_to_irq; -pci_hotplug_fn hotplug; -DeviceState *hotplug_qdev;void *irq_opaque;PCIDevice *devices[PCI_SLOT_MAX *PCI_FUNC_MAX ];PCIDevice *parent_dev;
Signature · 1 line
1.7.1