arm: omap: cm_t35: update config file
PATCH 1/1 arm: omap: cm_t35: update config file
This patch makes the following updates to the cm_t35 config file:
- Replace "ttyS" in default environment kernel bootargs with the new "ttyO" notation.
- Remove "omapfb.debug=y" from default environment kernel bootargs.
- Define a minimal power-on delay for USB hub ports so that slow-to-power-on USB sticks will have enough time to become responsive.
- Add support for bootz command
- ulpi_reset is not necessary and always fails with the following error message:
"ULPI: ulpi_reset: failed writing reset bit"
So, remove it.
--- include/configs/cm_t35.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
include/configs/cm_t35.h +4 -5
@@ -104,8 +104,6 @@#define CONFIG_USB_OMAP3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_OMAP -#define CONFIG_USB_ULPI -#define CONFIG_USB_ULPI_VIEWPORT_OMAP #define CONFIG_USB_STORAGE #define CONFIG_MUSB_UDC #define CONFIG_TWL4030_USB
@@ -115,6 +113,8 @@#define CONFIG_USB_DEVICE #define CONFIG_USB_TTY #define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* This delay is really for slow-to-power-on USB sticks, not the hub */ +#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500/* commands to include */ #include <config_cmd_default.h>
@@ -176,7 +176,7 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16 at 60\0" \
@@ -190,7 +190,6 @@"mpurate=${mpurate} " \"vram=${vram} " \"omapfb.mode=dvi:${dvimode} " \ -"omapfb.debug=y " \"omapdss.def_disp=${defaultdisplay} " \"root=${mmcroot} " \"rootfstype=${mmcrootfstype}\0" \
@@ -198,7 +197,6 @@"mpurate=${mpurate} " \"vram=${vram} " \"omapfb.mode=dvi:${dvimode} " \ -"omapfb.debug=y " \"omapdss.def_disp=${defaultdisplay} " \"root=${nandroot} " \"rootfstype=${nandrootfstype}\0" \
@@ -214,6 +212,7 @@"nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ +#define CONFIG_CMD_BOOTZ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \
Signature · 1 line
1.8.1.2
PATCH 1/1 arm: omap: cm_t35: update config file
Quoted 10 lines · Nikita Kiryanov
This patch makes the following updates to the
cm_t35config file:
- Replace "ttyS" in default environment kernel bootargs with the new "ttyO" notation.
- Remove "omapfb.debug=y" from default environment kernel bootargs.
- Define a minimal power-on delay for USB hub ports so that slow-to-power-on USB sticks will have enough time to become responsive.
- Add support for bootz command
-ulpi_resetis not necessary and always fails with the following error message:
"ULPI:ulpi_reset: failed writing reset bit"
So, remove it.
Yes, I had this on my list as well. :)
Quoted 3 lines
Cc Tom Rini <[email protected]>Signed-off-by Nikita Kiryanov <[email protected]>Acked-by Igor Grinberg <[email protected]>
Thanks,
Stefan
Quoted 11 lines · Nikita Kiryanov
This patch makes the following updates to the
cm_t35config file:
- Replace "ttyS" in default environment kernel bootargs with the new "ttyO" notation.
- Remove "omapfb.debug=y" from default environment kernel bootargs.
- Define a minimal power-on delay for USB hub ports so that slow-to-power-on USB sticks will have enough time to become responsive.
- Add support for bootz command
-ulpi_resetis not necessary and always fails with the following error message:
"ULPI:ulpi_reset: failed writing reset bit"
So, remove it.
Quoted 4 lines
Cc Tom Rini <[email protected]>Signed-off-by Nikita Kiryanov <[email protected]>Acked-by Igor Grinberg <[email protected]>Acked-by Stefan Roese <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131213/0ca5e6fa/attachment.pgp>