Skip to contentSkip to conversation

Renesas R-Car Gen2 Common Clock Framework arch/ support

PATCH New Laurent Pinchart 3 participants 13 messages Dec 11, 2013 – Dec 19, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

 arch/arm/boot/dts/r8a7790.dtsi            | 328 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h
Signature · 3 lines
Regards,

Laurent Pinchart
#1 lore raw

PATCH v4 1/5 ARM: shmobile: r8a7790: Add clock index macros for DT sources

Add macros usable by device tree sources to reference r8a7790 clocks by index.

---
 include/dt-bindings/clock/r8a7790-clock.h | 100 ++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
include/dt-bindings/clock/r8a7790-clock.h new file +100 -0
new file mode 100644
index 0000000..420f0b0
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
+#define __DT_BINDINGS_CLOCK_R8A7790_H__
+
+/* CPG */
+#define R8A7790_CLK_MAIN		0
+#define R8A7790_CLK_PLL0		1
+#define R8A7790_CLK_PLL1		2
+#define R8A7790_CLK_PLL3		3
+#define R8A7790_CLK_LB			4
+#define R8A7790_CLK_QSPI		5
+#define R8A7790_CLK_SDH			6
+#define R8A7790_CLK_SD0			7
+#define R8A7790_CLK_SD1			8
+#define R8A7790_CLK_Z			9
+
+/* MSTP1 */
+#define R8A7790_CLK_TMU1		11
+#define R8A7790_CLK_TMU3		21
+#define R8A7790_CLK_TMU2		22
+#define R8A7790_CLK_CMT0		24
+#define R8A7790_CLK_TMU0		25
+#define R8A7790_CLK_VSP1_DU1		27
+#define R8A7790_CLK_VSP1_DU0		28
+#define R8A7790_CLK_VSP1_RT		30
+#define R8A7790_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7790_CLK_SCIFA2		2
+#define R8A7790_CLK_SCIFA1		3
+#define R8A7790_CLK_SCIFA0		4
+#define R8A7790_CLK_SCIFB0		6
+#define R8A7790_CLK_SCIFB1		7
+#define R8A7790_CLK_SCIFB2		16
+#define R8A7790_CLK_SYS_DMAC0		18
+#define R8A7790_CLK_SYS_DMAC1		19
+
+/* MSTP3 */
+#define R8A7790_CLK_TPU0		4
+#define R8A7790_CLK_MMCIF1		5
+#define R8A7790_CLK_SDHI3		11
+#define R8A7790_CLK_SDHI2		12
+#define R8A7790_CLK_SDHI1		13
+#define R8A7790_CLK_SDHI0		14
+#define R8A7790_CLK_MMCIF0		15
+#define R8A7790_CLK_SSUSB		28
+#define R8A7790_CLK_CMT1		29
+#define R8A7790_CLK_USBDMAC0		30
+#define R8A7790_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7790_CLK_THERMAL		22
+#define R8A7790_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7790_CLK_EHCI		3
+#define R8A7790_CLK_HSUSB		4
+#define R8A7790_CLK_HSCIF1		16
+#define R8A7790_CLK_HSCIF0		17
+#define R8A7790_CLK_SCIF1		20
+#define R8A7790_CLK_SCIF0		21
+#define R8A7790_CLK_DU2			22
+#define R8A7790_CLK_DU1			23
+#define R8A7790_CLK_DU0			24
+#define R8A7790_CLK_LVDS1		25
+#define R8A7790_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7790_CLK_VIN3		8
+#define R8A7790_CLK_VIN2		9
+#define R8A7790_CLK_VIN1		10
+#define R8A7790_CLK_VIN0		11
+#define R8A7790_CLK_ETHER		13
+#define R8A7790_CLK_SATA1		14
+#define R8A7790_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7790_CLK_GPIO5		7
+#define R8A7790_CLK_GPIO4		8
+#define R8A7790_CLK_GPIO3		9
+#define R8A7790_CLK_GPIO2		10
+#define R8A7790_CLK_GPIO1		11
+#define R8A7790_CLK_GPIO0		12
+#define R8A7790_CLK_RCAN1		15
+#define R8A7790_CLK_RCAN0		16
+#define R8A7790_CLK_IICDVFS		26
+#define R8A7790_CLK_I2C3		28
+#define R8A7790_CLK_I2C2		29
+#define R8A7790_CLK_I2C1		30
+#define R8A7790_CLK_I2C0		31
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
Signature · 1 line
1.8.3.2
#2 lore raw

PATCH v4 2/5 ARM: shmobile: r8a7791: Add clock index macros for DT sources

In reply to Laurent Pinchart

Add macros usable by device tree sources to reference r8a7791 clocks by index.

---
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h
include/dt-bindings/clock/r8a7791-clock.h new file +105 -0
new file mode 100644
index 0000000..df1715b
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
+#define __DT_BINDINGS_CLOCK_R8A7791_H__
+
+/* CPG */
+#define R8A7791_CLK_MAIN		0
+#define R8A7791_CLK_PLL0		1
+#define R8A7791_CLK_PLL1		2
+#define R8A7791_CLK_PLL3		3
+#define R8A7791_CLK_LB			4
+#define R8A7791_CLK_QSPI		5
+#define R8A7791_CLK_SDH			6
+#define R8A7791_CLK_SD0			7
+#define R8A7791_CLK_Z			8
+
+/* MSTP1 */
+#define R8A7791_CLK_TMU1		11
+#define R8A7791_CLK_TMU3		21
+#define R8A7791_CLK_TMU2		22
+#define R8A7791_CLK_CMT0		24
+#define R8A7791_CLK_TMU0		25
+#define R8A7791_CLK_VSP1_DU1		27
+#define R8A7791_CLK_VSP1_DU0		28
+#define R8A7791_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7791_CLK_SCIFA2		2
+#define R8A7791_CLK_SCIFA1		3
+#define R8A7791_CLK_SCIFA0		4
+#define R8A7791_CLK_SCIFB0		6
+#define R8A7791_CLK_SCIFB1		7
+#define R8A7791_CLK_SCIFB2		16
+#define R8A7791_CLK_DMAC		18
+
+/* MSTP3 */
+#define R8A7791_CLK_TPU0		4
+#define R8A7791_CLK_SDHI2		11
+#define R8A7791_CLK_SDHI1		12
+#define R8A7791_CLK_SDHI0		14
+#define R8A7791_CLK_MMCIF0		15
+#define R8A7791_CLK_SSUSB		28
+#define R8A7791_CLK_CMT1		29
+#define R8A7791_CLK_USBDMAC0		30
+#define R8A7791_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7791_CLK_THERMAL		22
+#define R8A7791_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7791_CLK_HSUSB		4
+#define R8A7791_CLK_HSCIF2		13
+#define R8A7791_CLK_SCIF5		14
+#define R8A7791_CLK_SCIF4		15
+#define R8A7791_CLK_HSCIF1		16
+#define R8A7791_CLK_HSCIF0		17
+#define R8A7791_CLK_SCIF3		18
+#define R8A7791_CLK_SCIF2		19
+#define R8A7791_CLK_SCIF1		20
+#define R8A7791_CLK_SCIF0		21
+#define R8A7791_CLK_DU1			23
+#define R8A7791_CLK_DU0			24
+#define R8A7791_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7791_CLK_VIN2		9
+#define R8A7791_CLK_VIN1		10
+#define R8A7791_CLK_VIN0		11
+#define R8A7791_CLK_ETHER		13
+#define R8A7791_CLK_SATA1		14
+#define R8A7791_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7791_CLK_GPIO7		4
+#define R8A7791_CLK_GPIO6		5
+#define R8A7791_CLK_GPIO5		7
+#define R8A7791_CLK_GPIO4		8
+#define R8A7791_CLK_GPIO3		9
+#define R8A7791_CLK_GPIO2		10
+#define R8A7791_CLK_GPIO1		11
+#define R8A7791_CLK_GPIO0		12
+#define R8A7791_CLK_RCAN1		15
+#define R8A7791_CLK_RCAN0		16
+#define R8A7791_CLK_I2C5		25
+#define R8A7791_CLK_IICDVFS		26
+#define R8A7791_CLK_I2C4		27
+#define R8A7791_CLK_I2C3		28
+#define R8A7791_CLK_I2C2		29
+#define R8A7791_CLK_I2C1		30
+#define R8A7791_CLK_I2C0		31
+
+/* MSTP11 */
+#define R8A7791_CLK_SCIFA3		6
+#define R8A7791_CLK_SCIFA4		7
+#define R8A7791_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */
Signature · 1 line
1.8.3.2
#3 lore raw

PATCH v4 3/5 ARM: shmobile: r8a7790: Add clocks

In reply to Laurent Pinchart

Declare all core clocks and DIV6 clocks, as well as all MSTP clocks currently used by r8a7790 boards.

---
 arch/arm/boot/dts/r8a7790.dtsi | 318 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 318 insertions(+)
arch/arm/boot/dts/r8a7790.dtsi +318 -0
index 68b7b87..d14c855 100644
@@ -8,6 +8,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/clock/r8a7790-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
@@ -287,4 +288,321 @@
 		cap-sd-highspeed;
 		status = "disabled";
 	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks at e6150000 {
+			compatible = "renesas,r8a7790-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "sd1",
+					     "z";
+		};
+
+		/* Variable factor clocks */
+		sd2_clk: sd2_clk at e6150078 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		sd3_clk: sd3_clk at e615007c {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615007c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd3";
+		};
+		mmc0_clk: mmc0_clk at e6150240 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+		mmc1_clk: mmc1_clk at e6150244 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150244 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc1";
+		};
+		ssp_clk: ssp_clk at e6150248 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150248 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssp";
+		};
+		ssprs_clk: ssprs_clk at e615024c {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615024c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssprs";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		z2_clk: z2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "z2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		b_clk: b_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "b";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		cl_clk: cl_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cl";
+		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
+		imp_clk: imp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "imp";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		oscclk_clk: oscclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(12 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "oscclk";
+		};
+		zb3_clk: zb3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "zb3";
+		};
+		zb3d2_clk: zb3d2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "zb3d2";
+		};
+		ddr_clk: ddr_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "ddr";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks at e6150134 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+				 <&zs_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
+				R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
+				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+			>;
+			clock-output-names =
+				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+				"vsp1-du0", "vsp1-rt", "vsp1-sy";
+		};
+		mstp2_clks: mstp2_clks at e6150138 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
+				R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_SCIFB2
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "scifb0", "scifb1",
+				"scifb2";
+		};
+		mstp3_clks: mstp3_clks at e615013c {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
+				 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
+				 <&mmc0_clk>, <&rclk_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
+				R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1
+			>;
+			clock-output-names =
+				"tpu0", "mmcif1", "sdhi3", "sdhi2",
+				"sdhi1", "sdhi0", "mmcif0", "cmt1";
+		};
+		mstp5_clks: mstp5_clks at e6150144 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&extal_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
+			clock-output-names = "thermal", "pwm";
+		};
+		mstp7_clks: mstp7_clks at e615014c {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
+				 <&zx_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
+				R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
+				R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
+				R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif1", "hscif0", "scif1",
+				"scif0", "du2", "du1", "du0", "lvds1", "lvds0";
+		};
+		mstp8_clks: mstp8_clks at e6150990 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7790_CLK_ETHER>;
+			clock-output-names = "ether";
+		};
+		mstp9_clks: mstp9_clks at e6150994 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_I2C3
+				R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
+			>;
+			clock-output-names = "rcan1", "rcan0", "i2c3", "i2c2", "i2c1", "i2c0";
+		};
+	};
 };
Signature · 1 line
1.8.3.2
#4 lore raw

PATCH v4 4/5 ARM: shmobile: r8a7790: Reference clocks

In reply to Laurent Pinchart

Reference clocks using a "clocks" property in all nodes corresponding to devices that require a clock.

---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7790.dtsi +10 -0
index d14c855..8ed48de 100644
@@ -197,6 +197,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
 	};
 
@@ -207,6 +208,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
 	};
 
@@ -217,6 +219,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
 	};
 
@@ -227,6 +230,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
@@ -235,6 +239,7 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -244,6 +249,7 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -258,6 +264,7 @@
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -267,6 +274,7 @@
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -276,6 +284,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -285,6 +294,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
Signature · 1 line
1.8.3.2
#5 lore raw

PATCH v4 5/5 ARM: shmobile: r8a7791: Add clocks

In reply to Laurent Pinchart

Declare all core clocks and DIV6 clocks, as well as all MSTP clocks currently used by r8a7791 boards.

---
 arch/arm/boot/dts/r8a7791.dtsi | 313 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 313 insertions(+)
arch/arm/boot/dts/r8a7791.dtsi +313 -0
index a349aff..0a82192 100644
@@ -9,6 +9,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/clock/r8a7791-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
@@ -183,4 +184,316 @@
 		reg = <0 0xe6060000 0 0x250>;
 		#gpio-range-cells = <3>;
 	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks at e6150000 {
+			compatible = "renesas,r8a7791-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z";
+		};
+
+		/* Variable factor clocks */
+		sd1_clk: sd2_clk at e6150078 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd1";
+		};
+		sd2_clk: sd3_clk at e615007c {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615007c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		mmc0_clk: mmc0_clk at e6150240 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+		ssp_clk: ssp_clk at e6150248 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150248 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssp";
+		};
+		ssprs_clk: ssprs_clk at e615024c {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615024c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssprs";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		b_clk: b_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "b";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		cl_clk: cl_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cl";
+		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
+		imp_clk: imp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "imp";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		oscclk_clk: oscclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(12 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "oscclk";
+		};
+		zb3_clk: zb3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "zb3";
+		};
+		zb3d2_clk: zb3d2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "zb3d2";
+		};
+		ddr_clk: ddr_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "ddr";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks at e6150134 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
+				R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
+				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+			>;
+			clock-output-names =
+				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+				"vsp1-du0", "vsp1-sy";
+		};
+		mstp2_clks: mstp2_clks at e6150138 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
+				R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 R8A7791_CLK_SCIFB2
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "scifb0", "scifb1",
+				"scifb2";
+		};
+		mstp3_clks: mstp3_clks at e615013c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>,
+				<&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
+				R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1
+			>;
+			clock-output-names =
+				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1";
+		};
+		mstp5_clks: mstp5_clks at e6150144 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&extal_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+			clock-output-names = "thermal", "pwm";
+		};
+		mstp7_clks: mstp7_clks at e615014c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
+				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
+				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
+				R8A7791_CLK_LVDS0
+			>;
+			clock-output-names =
+				"hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
+		};
+		mstp8_clks: mstp8_clks at e6150990 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7791_CLK_ETHER>;
+			clock-output-names = "ether";
+		};
+		mstp9_clks: mstp9_clks at e6150994 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_I2C4
+				R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
+				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+			>;
+			clock-output-names =
+				"rcan1", "rcan0", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1",
+				"i2c0";
+		};
+		mstp11_clks: mstp11_clks at e615099c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <
+				R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
+			>;
+			clock-output-names = "scifa3", "scifa4", "scifa5";
+		};
+	};
 };
Signature · 1 line
1.8.3.2
#6 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

In reply to Laurent Pinchart

[ CC Magnus ]

Quoted 18 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

* serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
Status: I have queued these up

#7 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Hi Simon,

Quoted 36 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

Quoted 7 lines

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/heads/clk-next-shmobile).

Quoted 2 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Quoted 3 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Quoted 9 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Quoted 3 lines

* serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
Status: I have queued these up

Signature · 3 lines
Regards,

Laurent Pinchart
#8 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Quoted 44 lines · Laurent Pinchart

Hi Simon,

Quoted 41 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

Quoted 6 lines
Quoted 2 lines

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/heads/clk-next-shmobile).

Great!

Quoted 5 lines
Quoted 2 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Thanks, got it.

Quoted 4 lines
Quoted 3 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

Quoted 8 lines

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Understood.

Quoted 11 lines
Quoted 9 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Yes, I will ask him to pick it up ASAP. Sorry for the mess there.

Quoted 9 lines
Quoted 3 lines

* serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
Status: I have queued these up

Signature · 3 lines
Regards,

Laurent Pinchart
#9 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Quoted 83 lines · Simon Horman
Quoted 44 lines · Laurent Pinchart

Hi Simon,

Quoted 41 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

Quoted 6 lines
Quoted 2 lines

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/heads/clk-next-shmobile).

Great!

Quoted 5 lines
Quoted 2 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Thanks, got it.

Quoted 4 lines
Quoted 3 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

Quoted 8 lines

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Understood.

Quoted 6 lines
Quoted 6 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Yes, I will ask him to pick it up ASAP. Sorry for the mess there.

Hi,

I think I may have found the reason that I dropped the ball, which is that I was waiting for v2 of the patch but never saw it.

In order to stop me making a further mess of this would you be able to re-post it to Daniel directly?

Quoted 14 lines
Quoted 9 lines
Quoted 3 lines

* serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
Status: I have queued these up

Signature · 3 lines
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

#10 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Hi Simon,

Quoted 95 lines · On Saturday 14 December 2013 11:19:01 Simon Horman wrote:
Quoted 85 lines · Simon Horman
Quoted 43 lines · Laurent Pinchart
Quoted 42 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

Quoted 7 lines
Quoted 2 lines

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/he
ads/clk-next-shmobile).

Great!

Quoted 6 lines
Quoted 3 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Thanks, got it.

Quoted 5 lines
Quoted 4 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

Quoted 8 lines

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Understood.

Quoted 6 lines
Quoted 6 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Yes, I will ask him to pick it up ASAP. Sorry for the mess there.

Quoted 7 lines

Hi,

I think I may have found the reason that I dropped the ball, which is that I was waiting for v2 of the patch but never saw it.

In order to stop me making a further mess of this would you be able to re-post it to Daniel directly?

When I mentioned v2 for the clocksource patches ("Re: [PATCH 01/12]
clocksource: sh_cmt: Add clk_prepare/unprepare support", Date: 30/10/2013 01:13) I meant v2 of the whole series. The sh_tmu and sh_mtu2 patches required a v2, but the sh_tmu patch didn't. v1 is thus the correct one. Do I need to resend it, or can you take it from the list ?

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

* serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
Status: I have queued these up

Signature · 3 lines
Regards,

Laurent Pinchart
#11 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Quoted 103 lines · Laurent Pinchart

Hi Simon,

Quoted 100 lines · On Saturday 14 December 2013 11:19:01 Simon Horman wrote:
Quoted 85 lines · Simon Horman
Quoted 43 lines · Laurent Pinchart
Quoted 42 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

Quoted 7 lines
Quoted 2 lines

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/he
ads/clk-next-shmobile).

Great!

Quoted 6 lines
Quoted 3 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Thanks, got it.

Quoted 5 lines
Quoted 4 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

Quoted 8 lines

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Understood.

Quoted 6 lines
Quoted 6 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Yes, I will ask him to pick it up ASAP. Sorry for the mess there.

Hi,

I think I may have found the reason that I dropped the ball, which is that I was waiting for v2 of the patch but never saw it.

Quoted 8 lines
Quoted 2 lines

In order to stop me making a further mess of this would you be able to re-post it to Daniel directly?

When I mentioned v2 for the clocksource patches ("Re: [PATCH 01/12]
clocksource: sh_cmt: Add clk_prepare/unprepare support", Date: 30/10/2013 01:13) I meant v2 of the whole series. The sh_tmu and sh_mtu2 patches required a v2, but the sh_tmu patch didn't. v1 is thus the correct one. Do I need to resend it, or can you take it from the list ?

I can take it.

#12 lore raw

v4 cover Renesas R-Car Gen2 Common Clock Framework arch/ support

Quoted 107 lines · Simon Horman
Quoted 106 lines · Laurent Pinchart

Hi Simon,

Quoted 102 lines · On Saturday 14 December 2013 11:19:01 Simon Horman wrote:
Quoted 85 lines · Simon Horman
Quoted 43 lines · Laurent Pinchart
Quoted 42 lines · On Saturday 14 December 2013 10:26:24 Simon Horman wrote:

[ CC Magnus ]

Quoted 19 lines · Laurent Pinchart

Hello,

This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas R-Car Gen2 Common Clock Framework support" patch series. The first three patches in that series have been reposted separately in the "[PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get merged through Mike Turquette's tree, while this series will go through the ARM SoC tree.

I've asked Mike to provide a stable branch when merging the CCF driver patches.

Laurent Pinchart (5):
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clocks
ARM: shmobile: r8a7790: Reference clocks
ARM: shmobile: r8a7791: Add clocks

Quoted 7 lines
 arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++
 arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++
 include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
 include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
 4 files changed, 846 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
 create mode 100644 include/dt-bindings/clock/r8a7791-clock.h

Hi Laurent,

I would like to confirm the dependencies of this series with you. As I understand things the dependencies that were not present in renesas-devel-v3.13-rc2-20131211 are as follows.

If any of the patches below can be skipped without breaking this series or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform support" then I am all for not treating them as dependencies at all.

Quoted 7 lines
Quoted 2 lines

* [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the patches in his tree in the clk-next-shmobile branch
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/he
ads/clk-next-shmobile).

Great!

Quoted 6 lines
Quoted 3 lines

* mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support and the lager reference board has the SDHI devices disabled.

Thanks, got it.

Quoted 5 lines
Quoted 4 lines

* spi: sh-msiof: Convert to clk_prepare/unprepare
spi: sh-msiof: Use devm_* managed allocators
Status: Merged by Mark Brown. I believe we need a stable branch from him.

Quoted 8 lines

You can drop this dependency as the lager and koelsch reference boards lack SPI support.

Quoted 2 lines

* usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference boards lack USB support.

Understood.

Quoted 6 lines
Quoted 6 lines

* clocksource: sh_tmu: Add clk_prepare/unprepare support
clocksource: sh_tmu: Release clock when sh_tmu_register() fails
clocksource: sh_mtu2: Add clk_prepare/unprepare support
clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Status: Present in v3.13-rc3. No problem!

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

* clocksource: sh_cmt: Add clk_prepare/unprepare support
Status: I think I have dropped the ball here.
Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

Yes, I will ask him to pick it up ASAP. Sorry for the mess there.

Hi,

I think I may have found the reason that I dropped the ball, which is that I was waiting for v2 of the patch but never saw it.

In order to stop me making a further mess of this would you be able to re-post it to Daniel directly?

Quoted 7 lines
Quoted 5 lines

When I mentioned v2 for the clocksource patches ("Re: [PATCH 01/12]
clocksource: sh_cmt: Add clk_prepare/unprepare support", Date: 30/10/2013 01:13) I meant v2 of the whole series. The sh_tmu and sh_mtu2 patches required a v2, but the sh_tmu patch didn't. v1 is thus the correct one. Do I need to resend it, or can you take it from the list ?

I can take it.

Daniel has taken the patch and provided a branch.

I will queue up this series accordingly.