Samsung DT for v3.14
The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:
Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt
for you to fetch changes up to e0b51c2eae8ebf10d80530b7a306818252206325:
ARM: dts: Update Samsung sysreg binding document (2013-12-16 04:47:38
+0900)
----------------------------------------------------------------
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs : add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific
----------------------------------------------------------------
Chander Kashyap (2):
clocksource: mct: extend mct to support 8 local interrupts for
Exynos5420
ARM: dts: populate cpu node entries to 8 cpus for exynos5420
Leela Krishna Amudala (1):
ARM: dts: Add device nodes for GScaler blocks for exynos5420
Sachin Kamat (4):
ARM: dts: Update min voltage for vdd_arm on Arndale
ARM: dts: Add hs-i2c nodes to exynos5420
ARM: dts: Fix sysreg node name in exynos4.dtsi
ARM: dts: Update Samsung sysreg binding document
Yuvaraj Kumar C D (5):
ARM: dts: Move dwmmc nodes from exynos5.dtsi to exynos5250.dtsi
ARM: dts: change status property of dwmmc nodes for exynos5250
ARM: dts: Move fifo-depth property from exynos5250 board dts
ARM: dts: rename mmc dts node for exynos5 series
ARM: dts: Add dwmmc DT nodes for exynos5420 SOC
.../devicetree/bindings/arm/samsung/sysreg.txt | 7 +- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 + arch/arm/boot/dts/cros5250-common.dtsi | 11 +- arch/arm/boot/dts/exynos4.dtsi | 2 +- arch/arm/boot/dts/exynos5.dtsi | 21 --- arch/arm/boot/dts/exynos5250-arndale.dts | 18 +- arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 +- arch/arm/boot/dts/exynos5250-snow.dts | 2 +- arch/arm/boot/dts/exynos5250.dtsi | 36 +++- arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 ++++ arch/arm/boot/dts/exynos5420.dtsi | 194 ++++++++++++++++++++- drivers/clocksource/exynos_mct.c | 4 + 12 files changed, 280 insertions(+), 66 deletions(-)
Quoted 9 lines · Kukjin Kim
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs
Quoted 8 lines
: add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific
I've been sending updates to disable the I2C and SPI devices by default
on 5250 for some time now - is there any chance of getting them
included?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131216/a28457b6/attachment.sig>
Quoted 21 lines · Mark Brown
Quoted 9 lines · Kukjin Kim
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCsQuoted 8 lines
: add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific
Quoted 3 lines
I've been sending updates to disable the I2C and SPI devices by default on 5250 for some time now - is there any chance of getting them included?
Probably, yes and I will send out 2nd round for v3.14 in this weekend before rc5 release ;-)
Thanks,
Kukjin
Quoted 8 lines · kgene at kernel.org
Quoted 3 lines · Mark Brown
I've been sending updates to disable the I2C and SPI devices by default on 5250 for some time now - is there any chance of getting them included?
Probably, yes and I will send out 2nd round for v3.14 in this weekend before rc5 release ;-)
Excellent, thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131217/a7c346cb/attachment.sig>
Olof Johansson
AppliedQuoted 25 lines · Kukjin Kim
The following changes since commit
6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dtfor you to fetch changes up to
e0b51c2eae8ebf10d80530b7a306818252206325:ARM: dts: Update Samsung sysreg binding document (2013-12-16
04:47:38 +0900)----------------------------------------------------------------
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCs
Quoted 8 lines
: add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific
Shouldn't some of these patches be fixes instead, i.e. the vdd_arm change for Arndale, the sysreg node fix, etc?
I've merged this in, but this I considered not doing it since it also contains new platform development. As I mentioned in the pull request for the 'dev'
branch: We need to see exynos converted to multiplatform before we pick up any more non-multiplatform support.
Merged into next/dt.
Regards,
-Olof
Quoted 37 lines · Olof Johansson
Quoted 1 line · Kukjin Kim
The following changes since commit
6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:Quoted 24 lines
Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dtfor you to fetch changes up to
e0b51c2eae8ebf10d80530b7a306818252206325:ARM: dts: Update Samsung sysreg binding document (2013-12-16
04:47:38 +0900)----------------------------------------------------------------
Samsung DT updates for v3.14
- Add support Octa Cores for exynos5420
: populate CPU node entries to 8 Cores
: extend mct to support 8 local interrupts
- Update dwmmc nodes for exynos5250 and exynos5420 : change status property of dwmmc nodes for exynos5250 : move dwmmc nodes from exynos5 to exynos5250 because it's different between exynos5250 and exynos5420 : rename mmc nodes from dwmmc for exynos5 SoCsQuoted 8 lines
: add dwmmc nodes for exynos5420
- Add G-Scaler nodes for exynos5420
- Add HS-i2c nodes in exynos5420
: High Speed I2C 7 channels (4 to 10)
- Update sysreg binding and node name in exynos4
- Update min voltage on exynos5250-arndale
- Move fifo-depth property from boards to exynos5250 SoC : because the fifo-depth property is SoC specific
Quoted 4 lines
Shouldn't some of these patches be fixes instead, i.e. the
vdd_armchange for
Arndale, the sysreg node fix, etc?
OK, I see, I will pay more attention, some of them were ambiguous though :-)
Quoted 7 lines
I've merged this in, but this I considered not doing it since it also contains
new platform development. As I mentioned in the pull request for the 'dev'
branch: We need to see exynos converted to multiplatform before we pick up any
more non-multiplatform support.
OK, thanks.
Quoted 2 lines
Merged into next/dt.
Thanks,
Kukjin