Skip to contentSkip to conversation

fix timeout handling with GRUB_HIDDEN_TIMEOUT=0

PATCH In review Andrey Borzenkov 2 participants 4 messages Dec 7, 2013 – Dec 24, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fix timeout handling with GRUB_HIDDEN_TIMEOUT=0

Before 44d488477902f0786d6bce44b74713f1713a34a9 combination of GRUB_HIDDEN_TIMEOUT=0 and GRUB_TIMEOUT!=0 resulted in normal menu with timeout. Now due to GRUB_HIDDEN_TIMEOUT taking precedence, it will always set timeout to 0 and immediately load default entry.

To ensure that update does not break existing configuration, refactor make_timeout code. We have

a) GRUB_TIMEOUT_STYLE set - assume new code
b) GRUB_HIDDEN_TIMEOUT > 0 - use existing logic to set GRUB_TIMEOUT_STYLE to hidden|countdown
c) GRUB_HIDDEN_TIMEOUT = 0 - set GRUB_TIMOUT_STYLE to menu

There is no need to have special case for GRUB_TIMEOUT_STYLE not set - it is the same as having it set to menu, so consolidate it with previous code.

---
 util/grub.d/00_header.in | 58 +++++++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
util/grub.d/00_header.in +30 -28
index d2e7252..0c82f23 100644
@@ -282,48 +282,50 @@ fi
 
 make_timeout ()
 {
-    if [ "x${1}${3}" != "x" ] ; then
-	if [ "x${3}" != "x" ] ; then
-	    timeout="${2}"
-	    style="${3}"
-	else
-	    # Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
-	    timeout="${1}"
-	    if [ "x${2}" != "x0" ] ; then
-		grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
-	    fi
-	    if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
-		style="hidden"
-	    else
-		style="countdown"
-	    fi
+    if [ "x${3}" != "x" ] ; then
+	timeout="${2}"
+	style="${3}"
+    elif [ "x${1}" != "x" -a "x${1}" != "x0" ] ; then
+	# Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
+	timeout="${1}"
+	if [ "x${2}" != "x0" ] ; then
+	    grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
 	fi
-	if [ "x${style}" = "xcountdown" ] ; then
-	    verbose=" --verbose"
-	else
+	if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
+	    style="hidden"
 	    verbose=
+	else
+	    style="countdown"
+	    verbose=" --verbose"
 	fi
-	cat << EOF
+    else
+	# No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu
+	timeout="${2}"
+	style="menu"
+    fi
+    cat << EOF
 if [ x\$feature_timeout_style = xy ] ; then
   set timeout_style=${style}
   set timeout=${timeout}
 EOF
-	if [ "x${style}" != "xmenu" ] ; then
-	    cat << EOF
+    if [ "x${style}" = "xmenu" ] ; then
+	cat << EOF
+# Fallback normal timeout code in case the timeout_style feature is
+# unavailable.
+else
+  set timeout=${timeout}
+EOF
+    else
+	cat << EOF
 # Fallback hidden-timeout code in case the timeout_style feature is
 # unavailable.
 elif sleep${verbose} --interruptible ${timeout} ; then
   set timeout=0
 EOF
-	fi
-	cat << EOF
+    fi
+    cat << EOF
 fi
 EOF
-    else
-	cat << EOF
-set timeout=${2}
-EOF
-    fi
 }
 
 if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
Signature · 1 line
tg: (bb05e31..) u/fix-hidden-timeout (depends on: master)
#1 lore raw

Ping? This fixes actual problem - default /etc/default/grub shipped on openSUSE included GRUB_HIDDEN_TIMEOUT=0 which means timeout gets disabled after update.

Colin, I Cc you as author of original patch - what do you think?

В Sat, 7 Dec 2013 21:24:19 +0400
Andrey Borzenkov <[email protected]> пишет:

Quoted 103 lines

Before 44d488477902f0786d6bce44b74713f1713a34a9 combination of GRUB_HIDDEN_TIMEOUT=0 and GRUB_TIMEOUT!=0 resulted in normal menu with timeout. Now due to GRUB_HIDDEN_TIMEOUT taking precedence, it will always set timeout to 0 and immediately load default entry.

To ensure that update does not break existing configuration, refactor make_timeout code. We have

a) GRUB_TIMEOUT_STYLE set - assume new code
b) GRUB_HIDDEN_TIMEOUT > 0 - use existing logic to set GRUB_TIMEOUT_STYLE to hidden|countdown
c) GRUB_HIDDEN_TIMEOUT = 0 - set GRUB_TIMOUT_STYLE to menu

There is no need to have special case for GRUB_TIMEOUT_STYLE not set - it is the same as having it set to menu, so consolidate it with previous code.

---
 util/grub.d/00_header.in | 58 +++++++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
util/grub.d/00_header.in +30 -28
index d2e7252..0c82f23 100644
@@ -282,48 +282,50 @@ fi
 
 make_timeout ()
 {
-    if [ "x${1}${3}" != "x" ] ; then
-	if [ "x${3}" != "x" ] ; then
-	    timeout="${2}"
-	    style="${3}"
-	else
-	    # Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
-	    timeout="${1}"
-	    if [ "x${2}" != "x0" ] ; then
-		grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
-	    fi
-	    if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
-		style="hidden"
-	    else
-		style="countdown"
-	    fi
+    if [ "x${3}" != "x" ] ; then
+	timeout="${2}"
+	style="${3}"
+    elif [ "x${1}" != "x" -a "x${1}" != "x0" ] ; then
+	# Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
+	timeout="${1}"
+	if [ "x${2}" != "x0" ] ; then
+	    grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
 	fi
-	if [ "x${style}" = "xcountdown" ] ; then
-	    verbose=" --verbose"
-	else
+	if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
+	    style="hidden"
 	    verbose=
+	else
+	    style="countdown"
+	    verbose=" --verbose"
 	fi
-	cat << EOF
+    else
+	# No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu
+	timeout="${2}"
+	style="menu"
+    fi
+    cat << EOF
 if [ x\$feature_timeout_style = xy ] ; then
   set timeout_style=${style}
   set timeout=${timeout}
 EOF
-	if [ "x${style}" != "xmenu" ] ; then
-	    cat << EOF
+    if [ "x${style}" = "xmenu" ] ; then
+	cat << EOF
+# Fallback normal timeout code in case the timeout_style feature is
+# unavailable.
+else
+  set timeout=${timeout}
+EOF
+    else
+	cat << EOF
 # Fallback hidden-timeout code in case the timeout_style feature is
 # unavailable.
 elif sleep${verbose} --interruptible ${timeout} ; then
   set timeout=0
 EOF
-	fi
-	cat << EOF
+    fi
+    cat << EOF
 fi
 EOF
-    else
-	cat << EOF
-set timeout=${2}
-EOF
-    fi
 }
 
 if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
#2 lore raw

@Colin: can you review this?

Quoted 120 lines · Andrey Borzenkov

Ping? This fixes actual problem - default /etc/default/grub shipped on openSUSE included GRUB_HIDDEN_TIMEOUT=0 which means timeout gets disabled after update.

Colin, I Cc you as author of original patch - what do you think?

В Sat, 7 Dec 2013 21:24:19 +0400
Andrey Borzenkov <[email protected]> пишет:

Quoted 93 lines

Before 44d488477902f0786d6bce44b74713f1713a34a9 combination of GRUB_HIDDEN_TIMEOUT=0 and GRUB_TIMEOUT!=0 resulted in normal menu with timeout. Now due to GRUB_HIDDEN_TIMEOUT taking precedence, it will always set timeout to 0 and immediately load default entry.

To ensure that update does not break existing configuration, refactor make_timeout code. We have

a) GRUB_TIMEOUT_STYLE set - assume new code
b) GRUB_HIDDEN_TIMEOUT > 0 - use existing logic to set GRUB_TIMEOUT_STYLE to hidden|countdown
c) GRUB_HIDDEN_TIMEOUT = 0 - set GRUB_TIMOUT_STYLE to menu

There is no need to have special case for GRUB_TIMEOUT_STYLE not set - it is the same as having it set to menu, so consolidate it with previous code.

---
 util/grub.d/00_header.in | 58 +++++++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
util/grub.d/00_header.in +30 -23
index d2e7252..0c82f23 100644
@@ -282,48 +282,50 @@ fi
 
 make_timeout ()
 {
-    if [ "x${1}${3}" != "x" ] ; then
-	if [ "x${3}" != "x" ] ; then
-	    timeout="${2}"
-	    style="${3}"
-	else
-	    # Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
-	    timeout="${1}"
-	    if [ "x${2}" != "x0" ] ; then
-		grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
-	    fi
-	    if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
-		style="hidden"
-	    else
-		style="countdown"
-	    fi
+    if [ "x${3}" != "x" ] ; then
+	timeout="${2}"
+	style="${3}"
+    elif [ "x${1}" != "x" -a "x${1}" != "x0" ] ; then
+	# Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
+	timeout="${1}"
+	if [ "x${2}" != "x0" ] ; then
+	    grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
 	fi
-	if [ "x${style}" = "xcountdown" ] ; then
-	    verbose=" --verbose"
-	else
+	if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
+	    style="hidden"
 	    verbose=
+	else
+	    style="countdown"
+	    verbose=" --verbose"
 	fi
-	cat << EOF
+    else
+	# No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu
+	timeout="${2}"
+	style="menu"
+    fi
+    cat << EOF
 if [ x\$feature_timeout_style = xy ] ; then
   set timeout_style=${style}
   set timeout=${timeout}
 EOF
-	if [ "x${style}" != "xmenu" ] ; then
-	    cat << EOF
+    if [ "x${style}" = "xmenu" ] ; then
+	cat << EOF
+# Fallback normal timeout code in case the timeout_style feature is
+# unavailable.
+else
+  set timeout=${timeout}
+EOF
+    else
+	cat << EOF
 # Fallback hidden-timeout code in case the timeout_style feature is
 # unavailable.
 elif sleep${verbose} --interruptible ${timeout} ; then
   set timeout=0
 EOF
-	fi
-	cat << EOF
+    fi
+    cat << EOF

util/grub.d/00_header.in fi · line 331

Quoted 10 lines
util/grub.d/00_header.in +0 -5
 fi
 EOF
-    else
-	cat << EOF
-set timeout=${2}
-EOF
-    fi
 }
 
 if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel

#3 lore raw
In reply to Andrey Borzenkov

Committed, thanks

Quoted 87 lines · Andrey Borzenkov
 util/grub.d/00_header.in | 58 +++++++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
util/grub.d/00_header.in +30 -29
index d2e7252..0c82f23 100644
@@ -282,48 +282,50 @@ fi
 
 make_timeout ()
 {
-    if [ "x${1}${3}" != "x" ] ; then
-	if [ "x${3}" != "x" ] ; then
-	    timeout="${2}"
-	    style="${3}"
-	else
-	    # Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
-	    timeout="${1}"
-	    if [ "x${2}" != "x0" ] ; then
-		grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
-	    fi
-	    if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
-		style="hidden"
-	    else
-		style="countdown"
-	    fi
+    if [ "x${3}" != "x" ] ; then
+	timeout="${2}"
+	style="${3}"
+    elif [ "x${1}" != "x" -a "x${1}" != "x0" ] ; then
+	# Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
+	timeout="${1}"
+	if [ "x${2}" != "x0" ] ; then
+	    grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
 	fi
-	if [ "x${style}" = "xcountdown" ] ; then
-	    verbose=" --verbose"
-	else
+	if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
+	    style="hidden"
 	    verbose=
+	else
+	    style="countdown"
+	    verbose=" --verbose"
 	fi
-	cat << EOF
+    else
+	# No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu
+	timeout="${2}"
+	style="menu"
+    fi
+    cat << EOF
 if [ x\$feature_timeout_style = xy ] ; then
   set timeout_style=${style}
   set timeout=${timeout}
 EOF
-	if [ "x${style}" != "xmenu" ] ; then
-	    cat << EOF
+    if [ "x${style}" = "xmenu" ] ; then
+	cat << EOF
+# Fallback normal timeout code in case the timeout_style feature is
+# unavailable.
+else
+  set timeout=${timeout}
+EOF
+    else
+	cat << EOF
 # Fallback hidden-timeout code in case the timeout_style feature is
 # unavailable.
 elif sleep${verbose} --interruptible ${timeout} ; then
   set timeout=0
 EOF
-	fi
-	cat << EOF
+    fi
+    cat << EOF
 fi
 EOF
-    else
-	cat << EOF
-set timeout=${2}
-EOF
-    fi
 }
 
 if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
-- tg: (bb05e31..) u/fix-hidden-timeout (depends on: master)