ARM: sunxi: Add A31 High Speed Timer Support
Subsystems (4)
cover ARM: sunxi: Add A31 High Speed Timer Support
Hi everyone,
This patchset enables support for the High Speed Timer IP found in the Allwinner A31 SoCs.
These timers are asserted in reset, and are not associated with any struct device, so we also add a small helper to the reset framework along the way to be able to retrieve the reset controller from the device tree directly.
Thanks,
Maxime
Maxime Ripard (3):
reset: Add of_reset_control_get
clocksource: sun5i: Add support for reset controller
ARM: sun6i: a31: Add support for the High Speed Timers
.../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 4 +++ arch/arm/boot/dts/sun6i-a31.dtsi | 11 ++++++ drivers/clocksource/timer-sun5i.c | 6 ++++ drivers/reset/core.c | 39 +++++++++++++++++----- include/linux/reset.h | 4 +++ 5 files changed, 55 insertions(+), 9 deletions(-)
Signature · 1 line
1.8.4.2
PATCH 1/3 reset: Add of_reset_control_get
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)
drivers/reset/core.c +30 -9
@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_control *rstc)EXPORT_SYMBOL_GPL (reset_control_deassert);/** -* reset_control_get - Lookup and obtain a reference to a reset controller. -* @dev: device to be reset by the controller +* of_reset_control_get - Lookup and obtain a reference to a reset controller. +* @node: device to be reset by the controller * @id: reset line name * * Returns a struct reset_control or IS_ERR() condition containing errno. * * Use of id names is optional. */ -struct reset_control *reset_control_get (struct device *dev,const char *id) +struct reset_control *of_reset_control_get (struct device_node *node, +const char *id) {struct reset_control *rstc =ERR_PTR (-EPROBE_DEFER );struct reset_controller_dev *r, *rcdev;
@@ -144,13 +145,10 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)int rstc_id;int ret; -if (!dev) -return ERR_PTR (-EINVAL ); -if (id) - index =of_property_match_string (dev->of_node, + index =of_property_match_string (node,"reset-names" , id); - ret =of_parse_phandle_with_args (dev->of_node,"resets" ,"#reset-cells" , + ret =of_parse_phandle_with_args (node,"resets" ,"#reset-cells" , index, &args);if (ret)return ERR_PTR (ret);
@@ -185,12 +183,35 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)return ERR_PTR (-ENOMEM ); } - rstc->dev = dev; rstc->rcdev = rcdev; rstc->id = rstc_id;return rstc; } +EXPORT_SYMBOL_GPL (of_reset_control_get); + +/** +* reset_control_get - Lookup and obtain a reference to a reset controller. +* @dev: device to be reset by the controller +* @id: reset line name +* +* Returns a struct reset_control or IS_ERR() condition containing errno. +* +* Use of id names is optional. +*/ +struct reset_control *reset_control_get (struct device *dev,const char *id) +{ +struct reset_control *rstc; + +if (!dev) +return ERR_PTR (-EINVAL ); + + rstc =of_reset_control_get (dev->of_node, id); +if (!IS_ERR (rstc)) + rstc->dev = dev; + +return rstc; +}EXPORT_SYMBOL_GPL (reset_control_get);/**
include/linux/reset.h +4 -0
@@ -1,6 +1,8 @@#ifndef _LINUX_RESET_H_#define _LINUX_RESET_H_ +#include <linux/of.h> +struct device ;struct reset_control ;
@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_control *rstc);int reset_control_assert (struct reset_control *rstc);int reset_control_deassert (struct reset_control *rstc); +struct reset_control *of_reset_control_get (struct device_node *node, +const char *id);struct reset_control *reset_control_get (struct device *dev,const char *id);void reset_control_put (struct reset_control *rstc);struct reset_control *devm_reset_control_get (struct device *dev,const char *id);
Signature · 1 line
1.8.4.2
PATCH 1/3 reset: Add of_reset_control_get
Maxime, Philipp,
Quoted 11 lines · Maxime Ripard
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)
I'd like to add that I have the exact same need as Maxime. Maxime needs of_reset_control_get() for timers, and in my case, I need it for CPUs, since I associated a reset controller to CPU nodes in my DT.
Funnily, even though Maxime and I work like 3 meters away from each other, both of us came up independently with almost exactly the same implementation to solve the exact same problem, without talking to each other about this need. It's only yesterday that we discovered we've had to solve the same problem.
So, definitely looking forward to seeing the feedback about this.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Philipp Zabel
maintainerPATCH 1/3 reset: Add of_reset_control_get
Am Samstag, den 21.12.2013, 09:42 +0100 schrieb Thomas Petazzoni:
Quoted 25 lines
Maxime, Philipp,
Quoted 11 lines · Maxime Ripard
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)I'd like to add that I have the exact same need as Maxime. Maxime needs
of_reset_control_get()for timers, and in my case, I need it for CPUs, since I associated a reset controller to CPU nodes in my DT.Funnily, even though Maxime and I work like 3 meters away from each other, both of us came up independently with almost exactly the same implementation to solve the exact same problem, without talking to each other about this need. It's only yesterday that we discovered we've had to solve the same problem.
Quoted 3 lines
So, definitely looking forward to seeing the feedback about this.
Thanks!
This looks like a useful addition. I'll reorder the GPIO reset patch for this.
regards
Philipp
PATCH 1/3 reset: Add of_reset_control_get
Hi Philipp,
Quoted 26 lines · Philipp Zabel
Am Samstag, den 21.12.2013, 09:42 +0100 schrieb Thomas Petazzoni:
Quoted 25 lines
Maxime, Philipp,
Quoted 11 lines · Maxime Ripard
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)I'd like to add that I have the exact same need as Maxime. Maxime needs
of_reset_control_get()for timers, and in my case, I need it for CPUs, since I associated a reset controller to CPU nodes in my DT.Funnily, even though Maxime and I work like 3 meters away from each other, both of us came up independently with almost exactly the same implementation to solve the exact same problem, without talking to each other about this need. It's only yesterday that we discovered we've had to solve the same problem.
Quoted 6 lines
Quoted 3 lines
So, definitely looking forward to seeing the feedback about this.
Thanks!
This looks like a useful addition. I'll reorder the GPIO reset patch for this.
How do you want to get this merged? You'll probably want to take this patch, and patches 2/3 and 3/3 depend on some patches merged by Daniel Lezcano (that I forgot to CC on this, I'll resend).
Maybe the best way would be simply to merge this one for 3.14 through your branch, and merge the two other patches in 3.15.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140108/376b280d/attachment.sig>
Philipp Zabel
maintainerPATCH 1/3 reset: Add of_reset_control_get
Am Mittwoch, den 08.01.2014, 11:38 +0100 schrieb Maxime Ripard:
Quoted 36 lines
Hi Philipp,
Quoted 26 lines · Philipp Zabel
Am Samstag, den 21.12.2013, 09:42 +0100 schrieb Thomas Petazzoni:
Quoted 25 lines
Maxime, Philipp,
Quoted 11 lines · Maxime Ripard
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)I'd like to add that I have the exact same need as Maxime. Maxime needs
of_reset_control_get()for timers, and in my case, I need it for CPUs, since I associated a reset controller to CPU nodes in my DT.Funnily, even though Maxime and I work like 3 meters away from each other, both of us came up independently with almost exactly the same implementation to solve the exact same problem, without talking to each other about this need. It's only yesterday that we discovered we've had to solve the same problem.
Quoted 6 lines
Quoted 3 lines
So, definitely looking forward to seeing the feedback about this.
Thanks!
This looks like a useful addition. I'll reorder the GPIO reset patch for this.
Quoted 6 lines
How do you want to get this merged? You'll probably want to take this patch, and patches 2/3 and 3/3 depend on some patches merged by Daniel Lezcano (that I forgot to CC on this, I'll resend).
Maybe the best way would be simply to merge this one for 3.14 through your branch, and merge the two other patches in 3.15.
Alright, this is applied to my branch. I'll wait a bit for feedback on the GPIO reset patches and then send a pull request.
regards
Philipp
PATCH 1/3 reset: Add of_reset_control_get
Quoted 39 lines · Philipp Zabel
Am Mittwoch, den 08.01.2014, 11:38 +0100 schrieb Maxime Ripard:
Quoted 38 lines · Philipp Zabel
Quoted 26 lines
Am Samstag, den 21.12.2013, 09:42 +0100 schrieb Thomas Petazzoni:
Quoted 25 lines
Maxime, Philipp,
Quoted 11 lines · Maxime Ripard
In some cases, you might need to deassert from reset an hardware block that doesn't associated to a struct device (CPUs, timers, etc.).
Add a small helper to retrieve the reset controller from the device tree without the need to pass a struct device.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- include/linux/reset.h | 4 ++++ 2 files changed, 34 insertions(+), 9 deletions(-)I'd like to add that I have the exact same need as Maxime. Maxime needs
of_reset_control_get()for timers, and in my case, I need it for CPUs, since I associated a reset controller to CPU nodes in my DT.Funnily, even though Maxime and I work like 3 meters away from each other, both of us came up independently with almost exactly the same implementation to solve the exact same problem, without talking to each other about this need. It's only yesterday that we discovered we've had to solve the same problem.
Quoted 6 lines
Quoted 3 lines
So, definitely looking forward to seeing the feedback about this.
Thanks!
This looks like a useful addition. I'll reorder the GPIO reset patch for this.
How do you want to get this merged? You'll probably want to take this patch, and patches 2/3 and 3/3 depend on some patches merged by Daniel Lezcano (that I forgot to CC on this, I'll resend).
Quoted 5 lines
Quoted 2 lines
Maybe the best way would be simply to merge this one for 3.14 through your branch, and merge the two other patches in 3.15.
Alright, this is applied to my branch. I'll wait a bit for feedback on the GPIO reset patches and then send a pull request.
Great then, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140108/bcfa97fb/attachment.sig>
PATCH 1/3 reset: Add of_reset_control_get
In reply to Philipp ZabelHi Philipp,
Quoted 9 lines · Philipp Zabel
Quoted 6 lines
How do you want to get this merged? You'll probably want to take this patch, and patches 2/3 and 3/3 depend on some patches merged by Daniel Lezcano (that I forgot to CC on this, I'll resend).
Maybe the best way would be simply to merge this one for 3.14 through your branch, and merge the two other patches in 3.15.
Alright, this is applied to my branch. I'll wait a bit for feedback on the GPIO reset patches and then send a pull request.
It doesn't seem to be in 3.14. Did I miss something?
Thanks,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140205/611bab2f/attachment.sig>
PATCH 2/3 clocksource: sun5i: Add support for reset controller
In reply to Maxime RipardThe Allwinner A31 that uses this timer has the timer IP asserted in reset. Add an optional reset property to the DT, and deassert the timer from reset if it's there.
--- .../devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt | 4 ++++ drivers/clocksource/timer-sun5i.c | 6 ++++++ 2 files changed, 10 insertions(+)
Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +4 -0
@@ -9,6 +9,9 @@ Required properties: one) - clocks: phandle to the source clock (usually the AHB clock) +Optionnal properties: +- resets: phandle to a reset controller asserting the timer + Example: timer at 01c60000 {
@@ -19,4 +22,5 @@ timer at 01c60000 { <0 53 1>, <0 54 1>; clocks = <&ahb1_gates 19>; + resets = <&ahb1rst 19>; };
drivers/clocksource/timer-sun5i.c +6 -0
@@ -16,6 +16,7 @@#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqreturn.h> +#include <linux/reset.h> #include <linux/sched_clock.h> #include <linux/of.h> #include <linux/of_address.h>
@@ -143,6 +144,7 @@ static u32 sun5i_timer_sched_read(void)static void __init sun5i_timer_init (struct device_node *node) { +struct reset_control *rstc;unsigned long rate;struct clk *clk;int ret, irq;
@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(struct device_node *node)clk_prepare_enable (clk); rate =clk_get_rate (clk); + rstc =of_reset_control_get (node,NULL ); +if (!IS_ERR (rstc)) +reset_control_deassert (rstc); +writel (~0 , timer_base +TIMER_INTVAL_LO_REG (1 ));writel (TIMER_CTL_ENABLE |TIMER_CTL_RELOAD , timer_base +TIMER_CTL_REG (1 ));
Signature · 1 line
1.8.4.2
PATCH 3/3 ARM: sun6i: a31: Add support for the High Speed Timers
In reply to Maxime RipardThe Allwinner A31 has support for four high speed timers. Apart for the number of timers (4 vs 2), it's basically the same logic than the high speed timers found in the sun5i chips.
Now that we have a driver to support it, we can enable them in the device tree.
--- arch/arm/boot/dts/sun6i-a31.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm/boot/dts/sun6i-a31.dtsi +11 -0
@@ -312,6 +312,17 @@ status = "disabled"; }; + hstimer at 01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 4>, + <0 52 4>, + <0 53 4>, + <0 54 4>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1_rst 19>; + }; + gic: interrupt-controller at 01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>,
Signature · 1 line
1.8.4.2