Skip to contentSkip to conversation

drm/i915: vlv: W/a for hotplug/manual VGA detection

PATCH In review Imre Deak 2 participants 2 messages Dec 17, 2013 – Jan 8, 2014

Subsystems (2)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH v2 1/1 drm/i915: vlv: W/a for hotplug/manual VGA detection

VGA detection requires the reference clock to be on, so make sure this is the case.

This fixes VGA hotplug/manual detection where all pipes are off and so we would normally disable all clocks.

v2:
- Instead of disabling PSR clock gating, force the reference clock on through the DPLL_A register. (Kin Chan S <[email protected]>)

---
 drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++--
 drivers/gpu/drm/i915/intel_pm.c      |  5 +++++
 2 files changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +12 -2
index 674fd43..f3a0a7e 100644
@@ -1507,9 +1507,15 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	/* Make sure the pipe isn't still relying on us */
 	assert_pipe_disabled(dev_priv, pipe);
 
-	/* Leave integrated clock source enabled */
+	/*
+	 * Leave integrated clock source enabled for pipe B and the reference
+	 * clock for pipe A. The latter is needed for VGA hotplug / manual
+	 * detection.
+	 */
 	if (pipe == PIPE_B)
 		val = DPLL_INTEGRATED_CRI_CLK_VLV;
+	else
+		val = DPLL_REFA_CLK_ENABLE_VLV;
 	I915_WRITE(DPLL(pipe), val);
 	POSTING_READ(DPLL(pipe));
 }
@@ -4984,7 +4990,11 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 
 	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
 
-	/* Enable DPIO clock input */
+	/*
+	 * Enable DPIO clock input. We should never disable the reference
+	 * clock for pipe A, since VGA hotplug / manual detection depends
+	 * on it. Set it here for state tracking.
+	 */
 	dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
 		DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
 	/* We should never disable this, set it here for state tracking */
drivers/gpu/drm/i915/intel_pm.c +5 -0
index fccd7a8..1c1de83 100644
@@ -4933,6 +4933,11 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 
 	I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
 
+	/* Force the reference clock on for VGA hotplug / manual detection */
+	val = I915_READ(DPLL(PIPE_A));
+	val |= DPLL_REFA_CLK_ENABLE_VLV;
+	I915_WRITE(DPLL(PIPE_A), val);
+
 	/* WaDisableEarlyCull:vlv */
 	I915_WRITE(_3D_CHICKEN3,
 		   _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
Signature · 1 line
1.8.4
#1 lore raw
Quoted 56 lines · Imre Deak

VGA detection requires the reference clock to be on, so make sure this is the case.

This fixes VGA hotplug/manual detection where all pipes are off and so we would normally disable all clocks.

v2:
- Instead of disabling PSR clock gating, force the reference clock on through the DPLL_A register. (Kin Chan S <[email protected]>)

---
 drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++--
 drivers/gpu/drm/i915/intel_pm.c      |  5 +++++
 2 files changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +12 -2
index 674fd43..f3a0a7e 100644
@@ -1507,9 +1507,15 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	/* Make sure the pipe isn't still relying on us */
 	assert_pipe_disabled(dev_priv, pipe);
 
-	/* Leave integrated clock source enabled */
+	/*
+	 * Leave integrated clock source enabled for pipe B and the reference
+	 * clock for pipe A. The latter is needed for VGA hotplug / manual
+	 * detection.
+	 */
 	if (pipe == PIPE_B)
 		val = DPLL_INTEGRATED_CRI_CLK_VLV;
+	else
+		val = DPLL_REFA_CLK_ENABLE_VLV;
 	I915_WRITE(DPLL(pipe), val);
 	POSTING_READ(DPLL(pipe));
 }
@@ -4984,7 +4990,11 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 
 	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
 
-	/* Enable DPIO clock input */
+	/*
+	 * Enable DPIO clock input. We should never disable the reference
+	 * clock for pipe A, since VGA hotplug / manual detection depends
+	 * on it. Set it here for state tracking.
+	 */
 	dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
 		DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
 	/* We should never disable this, set it here for state tracking */
drivers/gpu/drm/i915/intel_pm.c +0 -0
index fccd7a8..1c1de83 100644

drivers/gpu/drm/i915/intel_pm.c static void valleyview_init_clock_gating(struct drm_device *dev) · line 4940

Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +5 -0
@@ -4933,6 +4933,11 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 
 	I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
 
+	/* Force the reference clock on for VGA hotplug / manual detection */
+	val = I915_READ(DPLL(PIPE_A));
+	val |= DPLL_REFA_CLK_ENABLE_VLV;
+	I915_WRITE(DPLL(PIPE_A), val);
+

Maybe put this part into intel_init_dpio()?

I can't really comment on the rest since I have no idea why it works.

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +0 -0
 	/* WaDisableEarlyCull:vlv */
 	I915_WRITE(_3D_CHICKEN3,
 		   _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
Signature · 6 lines
1.8.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 2 lines
Ville Syrjälä
Intel OTC