Skip to contentSkip to conversation

xen/pygrub: grub2/grub.cfg from RHEL 7 has new commands in menuentry.

PATCH Superseded Joby Poriyath 2 participants 2 messages Jan 30, 2014 – Feb 4, 2014

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 xen/pygrub: grub2/grub.cfg from RHEL 7 has new commands in menuentry.

menuentry in grub2/grub.cfg uses linux16 and initrd16 commands instead of linux and initrd. Due to this RHEL 7 (beta) guest failed to boot after the installation.

In addition to this, menuentry has some options as well (--class red, --class gnu, etc).

v2: Added RHEL 7 grub.cfg in pygrub/examples
v3: Tidied the commit message.

Kindly consider this patch for xen-4.4 as RHEL 7 (beta) fails to boot on Xen.

---
 tools/pygrub/examples/rhel-7-beta.grub2 |  118 +++++++++++++++++++++++++++++++
 tools/pygrub/src/GrubConf.py            |    4 +-
 2 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 tools/pygrub/examples/rhel-7-beta.grub2
tools/pygrub/examples/rhel-7-beta.grub2 new file +118 -0
new file mode 100644
index 0000000..88f0f99
@@ -0,0 +1,118 @@
+#
+# DO NOT EDIT THIS FILE
+#
+# It is automatically generated by grub2-mkconfig using templates
+# from /etc/grub.d and settings from /etc/default/grub
+#
+
+### BEGIN /etc/grub.d/00_header ###
+set pager=1
+
+if [ -s $prefix/grubenv ]; then
+  load_env
+fi
+if [ "${next_entry}" ] ; then
+   set default="${next_entry}"
+   set next_entry=
+   save_env next_entry
+   set boot_once=true
+else
+   set default="${saved_entry}"
+fi
+
+if [ x"${feature_menuentry_id}" = xy ]; then
+  menuentry_id_option="--id"
+else
+  menuentry_id_option=""
+fi
+
+export menuentry_id_option
+
+if [ "${prev_saved_entry}" ]; then
+  set saved_entry="${prev_saved_entry}"
+  save_env saved_entry
+  set prev_saved_entry=
+  save_env prev_saved_entry
+  set boot_once=true
+fi
+
+function savedefault {
+  if [ -z "${boot_once}" ]; then
+    saved_entry="${chosen}"
+    save_env saved_entry
+  fi
+}
+
+function load_video {
+  if [ x$feature_all_video_module = xy ]; then
+    insmod all_video
+  else
+    insmod efi_gop
+    insmod efi_uga
+    insmod ieee1275_fb
+    insmod vbe
+    insmod vga
+    insmod video_bochs
+    insmod video_cirrus
+  fi
+}
+
+terminal_output console
+set timeout=5
+### END /etc/grub.d/00_header ###
+
+### BEGIN /etc/grub.d/10_linux ###
+menuentry 'Red Hat Enterprise Linux Everything, with Linux 3.10.0-54.0.1.el7.x86_64' --class red --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.10.0-54.0.1.el7.x86_64-advanced-d23b8b49-4cfe-4900-8ef1-ec80bc633163' {
+	load_video
+	set gfxpayload=keep
+	insmod gzio
+	insmod part_msdos
+	insmod xfs
+	set root='hd0,msdos1'
+	if [ x$feature_platform_search_hint = xy ]; then
+	  search --no-floppy --fs-uuid --set=root --hint='hd0,msdos1'  89ffef78-82b3-457c-bc57-42cccc373851
+	else
+	  search --no-floppy --fs-uuid --set=root 89ffef78-82b3-457c-bc57-42cccc373851
+	fi
+	linux16 /vmlinuz-3.10.0-54.0.1.el7.x86_64 root=/dev/mapper/rhel-root ro rd.lvm.lv=rhel/swap vconsole.keymap=uk crashkernel=auto rd.lvm.lv=rhel/root vconsole.font=latarcyrheb-sun16 LANG=en_GB.UTF-8
+	initrd16 /initramfs-3.10.0-54.0.1.el7.x86_64.img
+}
+menuentry 'Red Hat Enterprise Linux Everything, with Linux 0-rescue-af34f0b8cf364cdbbe6d093f8228a37f' --class red --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f-advanced-d23b8b49-4cfe-4900-8ef1-ec80bc633163' {
+	load_video
+	insmod gzio
+	insmod part_msdos
+	insmod xfs
+	set root='hd0,msdos1'
+	if [ x$feature_platform_search_hint = xy ]; then
+	  search --no-floppy --fs-uuid --set=root --hint='hd0,msdos1'  89ffef78-82b3-457c-bc57-42cccc373851
+	else
+	  search --no-floppy --fs-uuid --set=root 89ffef78-82b3-457c-bc57-42cccc373851
+	fi
+	linux16 /vmlinuz-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f root=/dev/mapper/rhel-root ro rd.lvm.lv=rhel/swap vconsole.keymap=uk crashkernel=auto rd.lvm.lv=rhel/root vconsole.font=latarcyrheb-sun16
+	initrd16 /initramfs-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f.img
+}
+
+### END /etc/grub.d/10_linux ###
+
+### BEGIN /etc/grub.d/20_linux_xen ###
+### END /etc/grub.d/20_linux_xen ###
+
+### BEGIN /etc/grub.d/20_ppc_terminfo ###
+### END /etc/grub.d/20_ppc_terminfo ###
+
+### BEGIN /etc/grub.d/30_os-prober ###
+### END /etc/grub.d/30_os-prober ###
+
+### BEGIN /etc/grub.d/40_custom ###
+# This file provides an easy way to add custom menu entries.  Simply type the
+# menu entries you want to add after this comment.  Be careful not to change
+# the 'exec tail' line above.
+### END /etc/grub.d/40_custom ###
+
+### BEGIN /etc/grub.d/41_custom ###
+if [ -f  ${config_directory}/custom.cfg ]; then
+  source ${config_directory}/custom.cfg
+elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
+  source $prefix/custom.cfg;
+fi
+### END /etc/grub.d/41_custom ###
tools/pygrub/src/GrubConf.py +3 -1
index cb853c9..974cded 100644
@@ -348,7 +348,9 @@ class Grub2Image(_GrubImage):
                 
     commands = {'set:root': 'root',
                 'linux': 'kernel',
+                'linux16': 'kernel',
                 'initrd': 'initrd',
+                'initrd16': 'initrd',
                 'echo': None,
                 'insmod': None,
                 'search': None}
@@ -394,7 +396,7 @@ class Grub2ConfigFile(_GrubConfigFile):
                 continue
 
             # new image
-            title_match = re.match('^menuentry ["\'](.*)["\'] (.*){', l)
+            title_match = re.match('^menuentry ["\'](.*?)["\'] (.*){', l)
             if title_match:
                 if img is not None:
                     raise RuntimeError, "syntax error: cannot nest menuentry (%d %s)" % (len(img),img)
Signature · 1 line
1.7.10.4
#1 lore raw
Quoted 6 lines · Joby Poriyath

menuentry in grub2/grub.cfg uses linux16 and initrd16 commands instead of linux and initrd. Due to this RHEL 7 (beta) guest failed to boot after the installation.

In addition to this, menuentry has some options as well (--class red, --class gnu, etc).

In response to v2 Andrew said:

This is not the reason for the change to the regex. The problem with the regex is because RHEL7 menu entries have two different single-quote delimited strings on the same line, and the greedy grouping gets both strings, and the options inbetween.

You do not seem to have addressed this feedback.

Quoted 5 lines

v2: Added RHEL 7 grub.cfg in pygrub/examples
v3: Tidied the commit message.

These should be below the first "---" (i.e. 4 lines further down...

Quoted 3 lines

Kindly consider this patch for xen-4.4 as RHEL 7 (beta) fails to boot on Xen.
---

... here)

So should "Kindly...". The reason for this is that the git tools for applying patches will strip out anything after the "---" so putting metainformation and commentary which isn't intended for the actual commit log here saves the committer stripping it manually.

Quoted 152 lines
 tools/pygrub/examples/rhel-7-beta.grub2 |  118 +++++++++++++++++++++++++++++++
 tools/pygrub/src/GrubConf.py            |    4 +-
 2 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 tools/pygrub/examples/rhel-7-beta.grub2
tools/pygrub/examples/rhel-7-beta.grub2 new file +118 -0
new file mode 100644
index 0000000..88f0f99
@@ -0,0 +1,118 @@
+#
+# DO NOT EDIT THIS FILE
+#
+# It is automatically generated by grub2-mkconfig using templates
+# from /etc/grub.d and settings from /etc/default/grub
+#
+
+### BEGIN /etc/grub.d/00_header ###
+set pager=1
+
+if [ -s $prefix/grubenv ]; then
+  load_env
+fi
+if [ "${next_entry}" ] ; then
+   set default="${next_entry}"
+   set next_entry=
+   save_env next_entry
+   set boot_once=true
+else
+   set default="${saved_entry}"
+fi
+
+if [ x"${feature_menuentry_id}" = xy ]; then
+  menuentry_id_option="--id"
+else
+  menuentry_id_option=""
+fi
+
+export menuentry_id_option
+
+if [ "${prev_saved_entry}" ]; then
+  set saved_entry="${prev_saved_entry}"
+  save_env saved_entry
+  set prev_saved_entry=
+  save_env prev_saved_entry
+  set boot_once=true
+fi
+
+function savedefault {
+  if [ -z "${boot_once}" ]; then
+    saved_entry="${chosen}"
+    save_env saved_entry
+  fi
+}
+
+function load_video {
+  if [ x$feature_all_video_module = xy ]; then
+    insmod all_video
+  else
+    insmod efi_gop
+    insmod efi_uga
+    insmod ieee1275_fb
+    insmod vbe
+    insmod vga
+    insmod video_bochs
+    insmod video_cirrus
+  fi
+}
+
+terminal_output console
+set timeout=5
+### END /etc/grub.d/00_header ###
+
+### BEGIN /etc/grub.d/10_linux ###
+menuentry 'Red Hat Enterprise Linux Everything, with Linux 3.10.0-54.0.1.el7.x86_64' --class red --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.10.0-54.0.1.el7.x86_64-advanced-d23b8b49-4cfe-4900-8ef1-ec80bc633163' {
+	load_video
+	set gfxpayload=keep
+	insmod gzio
+	insmod part_msdos
+	insmod xfs
+	set root='hd0,msdos1'
+	if [ x$feature_platform_search_hint = xy ]; then
+	  search --no-floppy --fs-uuid --set=root --hint='hd0,msdos1'  89ffef78-82b3-457c-bc57-42cccc373851
+	else
+	  search --no-floppy --fs-uuid --set=root 89ffef78-82b3-457c-bc57-42cccc373851
+	fi
+	linux16 /vmlinuz-3.10.0-54.0.1.el7.x86_64 root=/dev/mapper/rhel-root ro rd.lvm.lv=rhel/swap vconsole.keymap=uk crashkernel=auto rd.lvm.lv=rhel/root vconsole.font=latarcyrheb-sun16 LANG=en_GB.UTF-8
+	initrd16 /initramfs-3.10.0-54.0.1.el7.x86_64.img
+}
+menuentry 'Red Hat Enterprise Linux Everything, with Linux 0-rescue-af34f0b8cf364cdbbe6d093f8228a37f' --class red --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f-advanced-d23b8b49-4cfe-4900-8ef1-ec80bc633163' {
+	load_video
+	insmod gzio
+	insmod part_msdos
+	insmod xfs
+	set root='hd0,msdos1'
+	if [ x$feature_platform_search_hint = xy ]; then
+	  search --no-floppy --fs-uuid --set=root --hint='hd0,msdos1'  89ffef78-82b3-457c-bc57-42cccc373851
+	else
+	  search --no-floppy --fs-uuid --set=root 89ffef78-82b3-457c-bc57-42cccc373851
+	fi
+	linux16 /vmlinuz-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f root=/dev/mapper/rhel-root ro rd.lvm.lv=rhel/swap vconsole.keymap=uk crashkernel=auto rd.lvm.lv=rhel/root vconsole.font=latarcyrheb-sun16
+	initrd16 /initramfs-0-rescue-af34f0b8cf364cdbbe6d093f8228a37f.img
+}
+
+### END /etc/grub.d/10_linux ###
+
+### BEGIN /etc/grub.d/20_linux_xen ###
+### END /etc/grub.d/20_linux_xen ###
+
+### BEGIN /etc/grub.d/20_ppc_terminfo ###
+### END /etc/grub.d/20_ppc_terminfo ###
+
+### BEGIN /etc/grub.d/30_os-prober ###
+### END /etc/grub.d/30_os-prober ###
+
+### BEGIN /etc/grub.d/40_custom ###
+# This file provides an easy way to add custom menu entries.  Simply type the
+# menu entries you want to add after this comment.  Be careful not to change
+# the 'exec tail' line above.
+### END /etc/grub.d/40_custom ###
+
+### BEGIN /etc/grub.d/41_custom ###
+if [ -f  ${config_directory}/custom.cfg ]; then
+  source ${config_directory}/custom.cfg
+elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
+  source $prefix/custom.cfg;
+fi
+### END /etc/grub.d/41_custom ###
tools/pygrub/src/GrubConf.py +3 -1
index cb853c9..974cded 100644
@@ -348,7 +348,9 @@ class Grub2Image(_GrubImage):
 
     commands = {'set:root': 'root',
                 'linux': 'kernel',
+                'linux16': 'kernel',
                 'initrd': 'initrd',
+                'initrd16': 'initrd',
                 'echo': None,
                 'insmod': None,
                 'search': None}
@@ -394,7 +396,7 @@ class Grub2ConfigFile(_GrubConfigFile):
                 continue
 
             # new image
-            title_match = re.match('^menuentry ["\'](.*)["\'] (.*){', l)
+            title_match = re.match('^menuentry ["\'](.*?)["\'] (.*){', l)
             if title_match:
                 if img is not None:
                     raise RuntimeError, "syntax error: cannot nest menuentry (%d %s)" % (len(img),img)