Skip to contentSkip to conversation

Add ethernet support for r7s72100

PATCH New Simon Horman 2 participants 5 messages Feb 6, 2014 – Feb 7, 2014

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v8 cover Add ethernet support for r7s72100

From: Simon Horman <[email protected]>

Hi,

this series integrates ethernet support to sh-pfc for the r7s72100 SoC and Genmai board.

This series is based on renesas-devel-v3.14-rc1-20140204 but patches from topic/r7s72100-v3.14-rc1-20140206 are required in order to boot the Genmai board.

There are no changes to these patches since v7, however driver patches included in that series have been dropped as they are present in v3.14-rc1.

Simon Horman (2):
ARM: shmobile: r7s72100: Add clock for r7s72100-ether
ARM: shmobile: genmai: Enable r7s72100-ether

 arch/arm/mach-shmobile/board-genmai.c   | 21 +++++++++++++++++++++
 arch/arm/mach-shmobile/clock-r7s72100.c |  4 ++++
 2 files changed, 25 insertions(+)
Signature · 1 line
1.8.5.2
#1 lore raw

PATCH v8 1/2 ARM: shmobile: r7s72100: Add clock for r7s72100-ether

---
v6 - v8
* No change

v5
* Rebase

v3 - v4
* No change

v2
* As suggested by Sergei Shtylyov
- Add MSTP74 to beginning of enum on a line by itself
* As suggested by Magnus Damm
- r7s72100 ethernet is not gigabit so do not refer to it as such

---
 arch/arm/mach-shmobile/clock-r7s72100.c | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/mach-shmobile/clock-r7s72100.c +4 -0
index dd8ce87..0242ca5 100644
@@ -27,6 +27,7 @@
 #define FRQCR2		0xfcfe0014
 #define STBCR3		0xfcfe0420
 #define STBCR4		0xfcfe0424
+#define STBCR7		0xfcfe0430
 #define STBCR9		0xfcfe0438
 
 #define PLL_RATE 30
@@ -146,6 +147,7 @@ struct clk div4_clks[DIV4_NR] = {
 };
 
 enum {	MSTP97, MSTP96, MSTP95, MSTP94,
+	MSTP74,
 	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
 	MSTP33,	MSTP_NR };
 
@@ -154,6 +156,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
 	[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
 	[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
+	[MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
 	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
 	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
 	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
@@ -180,6 +183,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
 	CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
 	CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]),
+	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
 	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 
 	/* ICK */
Signature · 1 line
1.8.5.2
#3 lore raw

PATCH v8 2/2 ARM: shmobile: genmai: Enable r7s72100-ether

In reply to Simon Horman

---
v3 - v8
* No change

v2
* As suggested by Magnus Damm and Sergei Shtylyov
- r7s72100 ethernet is not gigabit so do not refer to it as such

* As suggested by Sergei Shtylyov
- set no_ether_link as there is no LINK signal documented in the manual

---
 arch/arm/mach-shmobile/board-genmai.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm/mach-shmobile/board-genmai.c +21 -0
index 3e92e3c..a1f6fe1 100644
@@ -20,15 +20,36 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sh_eth.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x00, /* PD60610 */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.no_ether_link		= 1
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe8203000, 0x800),
+	DEFINE_RES_MEM(0xe8204800, 0x200),
+	DEFINE_RES_IRQ(gic_iid(359)),
+};
+
 static void __init genmai_add_standard_devices(void)
 {
 	r7s72100_clock_init();
 	r7s72100_add_dt_devices();
+
+	platform_device_register_resndata(&platform_bus, "r7s72100-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_pdata, sizeof(ether_pdata));
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {
Signature · 1 line
1.8.5.2