zynq: Add support for U-BOOT SPL
Subsystems (2)
PATCH 1/1 zynq: Add support for U-BOOT SPL
SPL is using ps7_init.c/h files which are generated from design tools which have to be copied to boards/xilinx/zynq folder before compilation.
BSS section is moved to SDRAM because fat support
requires more space than SRAM size.
Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL command
---
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/cpu.c | 4 +- arch/arm/cpu/armv7/zynq/spl.c | 69 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/u-boot-spl.lds | 61 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-zynq/spl.h | 18 ++++++++ board/xilinx/zynq/Makefile | 1 + board/xilinx/zynq/ps7_init.c | 12 ++++++ include/configs/zynq-common.h | 77 ++++++++++++++++++++++++++++++++++ 8 files changed, 241 insertions(+), 2 deletions(-) create mode 100644 arch/arm/cpu/armv7/zynq/spl.c create mode 100644 arch/arm/cpu/armv7/zynq/u-boot-spl.lds create mode 100644 arch/arm/include/asm/arch-zynq/spl.h create mode 100644 board/xilinx/zynq/ps7_init.c
arch/arm/cpu/armv7/zynq/Makefile +1 -0
@@ -13,3 +13,4 @@ obj-y += cpu.o obj-y += ddrc.o obj-y += slcr.o obj-y += clk.o +obj-$(CONFIG_SPL_BUILD) += spl.o
arch/arm/cpu/armv7/zynq/cpu.c +2 -2
@@ -17,7 +17,7 @@ void lowlevel_init(void)int arch_cpu_init (void ) {zynq_slcr_unlock (); - +#ifndef CONFIG_SPL_BUILD /* Device config APB, unlock the PCAP */ writel (0x757BDF0D , &devcfg_base->unlock);writel (0xFFFFFFFF , &devcfg_base->rom_shadow);
@@ -35,7 +35,7 @@ int arch_cpu_init(void)/* Urgent write, ports S2/S3 */ writel (0xC , &slcr_base->ddr_urgent);#endif - +#endif zynq_clk_early_init ();zynq_slcr_lock ();
arch/arm/cpu/armv7/zynq/spl.c new file +69 -0
69 lines not on this page · raw message
arch/arm/cpu/armv7/zynq/u-boot-spl.lds new file +61 -0
61 lines not on this page · raw message
arch/arm/include/asm/arch-zynq/spl.h new file +18 -0
@@ -0,0 +1,18 @@ +/* +* (C) Copyright 2014 Xilinx, Inc. Michal Simek +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +extern void ps7_init (void ); + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_RAM 1 +#define BOOT_DEVICE_SPI 2 +#define BOOT_DEVICE_MMC1 3 +#define BOOT_DEVICE_MMC2 4 +#define BOOT_DEVICE_MMC2_2 5 + +#endif
board/xilinx/zynq/Makefile +1 -0
@@ -6,3 +6,4 @@ # obj-y := board.o +obj-$(CONFIG_SPL_BUILD) += ps7_init.o
board/xilinx/zynq/ps7_init.c new file +12 -0
@@ -0,0 +1,12 @@ +/* +* (C) Copyright 2014 Xilinx, Inc. Michal Simek +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#include <common.h> +#include <asm/arch/spl.h> + +__weak void ps7_init (void ) +{ +puts ("Please copy ps7_init.c/h from hw project\n" ); +}
include/configs/zynq-common.h +77 -0
81 lines not on this page · raw message
--
1.8.2.3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140207/7a88424e/attachment.pgp>
PATCH 1/1 zynq: Add support for U-BOOT SPL
Quoted 7 lines · Michal Simek
SPL is using ps7_init.c/h files which are generated from design tools which have to be copied to boards/xilinx/zynq folder before compilation.
BSS section is moved to SDRAM because fat support requires more space than SRAM size.
Quoted 6 lines
Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL commandSigned-off-by Michal Simek <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140207/cdc8175a/attachment.pgp>
PATCH 1/1 zynq: Add support for U-BOOT SPL
Hi Michal,
Quoted 9 lines · Tom Rini
Quoted 7 lines · Michal Simek
SPL is using ps7_init.c/h files which are generated from design tools which have to be copied to boards/xilinx/zynq folder before compilation.
BSS section is moved to SDRAM because fat support requires more space than SRAM size.
Quoted 8 lines
Quoted 6 lines
Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL commandSigned-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>
This does not seem to apply cleanly to current u-boot-arm/master or u-boot/master. Does this depend on other patches or on some not-yet-applied PR?
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 zynq: Add support for U-BOOT SPL
Quoted 18 lines · Albert ARIBAUD
Hi Michal,
Quoted 14 lines · Tom Rini
Quoted 12 lines · Michal Simek
SPL is using ps7_init.c/h files which are generated from design tools which have to be copied to boards/xilinx/zynq folder before compilation.
BSS section is moved to SDRAM because fat support requires more space than SRAM size.
Added:
- MMC and QSPI support
- Boot OS directly from SPL
- Enable SPL command
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Michal Simek <[email protected]>Reviewed-by Tom Rini <[email protected]>This does not seem to apply cleanly to current u-boot-arm/master or u-boot/master. Does this depend on other patches or on some not-yet-applied PR?
Yes. It depends on previous patches. I am going to send you zynq pull request today with all these patches.
Thanks,
Michal