Skip to contentSkip to conversation

sdl: fix autoreconf timing issue

PATCH New Maxime Hadjinlian 3 participants 4 messages Feb 11, 2014 – Feb 12, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sdl: fix autoreconf timing issue

Context:
The autobuilders were failing on the symbol _XData32 being in conflicts. A patch had been added to SDL to add a check to the configure.in

Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in conflicts eventhrough the patch was here.

What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]

Right before running autogen.sh, we have configure.in which is more recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.

If your machine was lighty loaded, the time difference between configure.in and configure was really tiny (ms order), which seems to be neglected by autoconf.
The results was that the configure was *NOT* generated. And our second patch was taken into account.

If your machine was under heavy load, the time difference between the two files would have been greater and then *maybe* picked up by autoconf. And then the configure file was re-generated.

When the 0001 patch was introduced, SDL package did *NOT* run it's autogen.sh, which is why it touches also the configure. This came later, causing this behavior.

Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/

---
 .../sdl/sdl-0001-use-correct-directfb-config.patch    | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)
package/sdl/sdl-0001-use-correct-directfb-config.patch +2 -17
index 2250790..ef671a1 100644
@@ -4,13 +4,10 @@ The configure script has just checked for the correct directfb-config
 script, so also use it for the version check instead of whatever
 might be in the path.
 
-Also patch the generated configure, as it doesn't cleanly autoreconf.
-
 Signed-off-by: Peter Korsgaard <[email protected]>
 ---
- configure    |    2 +-
  configure.in |    2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
+ 1 files changed, 1 insertions(+), 1 deletions(-)
 
 Index: SDL-1.2.15/configure.in
 ===================================================================
@@ -25,16 +22,4 @@ Index: SDL-1.2.15/configure.in
              HAVE_VERSION=`expr $1 \* 10000 + $2 \* 100 + $3`
              if test $HAVE_VERSION -ge $NEED_VERSION; then
                  DIRECTFB_CFLAGS=`$DIRECTFBCONFIG --cflags`
-Index: SDL-1.2.15/configure
-===================================================================
---- SDL-1.2.15.orig/configure
-+++ SDL-1.2.15/configure
-@@ -24958,7 +24958,7 @@
-         else
-             set -- `echo $DIRECTFB_REQUIRED_VERSION | sed 's/\./ /g'`
-             NEED_VERSION=`expr $1 \* 10000 + $2 \* 100 + $3`
--            set -- `directfb-config --version | sed 's/\./ /g'`
-+            set -- `$DIRECTFBCONFIG --version | sed 's/\./ /g'`
-             HAVE_VERSION=`expr $1 \* 10000 + $2 \* 100 + $3`
-             if test $HAVE_VERSION -ge $NEED_VERSION; then
-                 DIRECTFB_CFLAGS=`$DIRECTFBCONFIG --cflags`
+
Signature · 1 line
1.8.5.3
#1 lore raw

PATCH 1/1 sdl: fix autoreconf timing issue

Quoted 23 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Maxime" == Maxime Hadjinlian <[email protected]> writes:

Context:
The autobuilders were failing on the symbol _XData32 being in conflicts. A patch had been added to SDL to add a check to the configure.in

Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in conflicts eventhrough the patch was here.

What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]

Right before running autogen.sh, we have configure.in which is more recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.

Quoted 5 lines

If your machine was lighty loaded, the time difference between configure.in and configure was really tiny (ms order), which seems to be neglected by autoconf.
The results was that the configure was *NOT* generated. And our second patch was taken into account.

NOT taken.

Committed with that fixed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#2 lore raw

PATCH 1/1 sdl: fix autoreconf timing issue

In reply to Maxime Hadjinlian

Dear Maxime Hadjinlian,

Quoted 4 lines · Maxime Hadjinlian

If your machine was under heavy load, the time difference between the two files would have been greater and then *maybe* picked up by autoconf. And then the configure file was re-generated.

Quoted 8 lines

When the 0001 patch was introduced, SDL package did *NOT* run it's autogen.sh, which is why it touches also the configure. This came later, causing this behavior.

Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/

Wow, amazing problem. Thanks a lot for getting to the bottom of it. The solution is indeed simple, but the investigation definitely wasn't (I've followed your conversation with Yann on IRC yesterday evening, and I remember quickly discussing the issue with you during the Buildroot Developer Days). Congrats!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#3 lore raw

PATCH 1/1 sdl: fix autoreconf timing issue

Quoted 15 lines · Thomas Petazzoni

Dear Maxime Hadjinlian,

Quoted 11 lines · Maxime Hadjinlian

If your machine was under heavy load, the time difference between the two files would have been greater and then *maybe* picked up by autoconf. And then the configure file was re-generated.

When the 0001 patch was introduced, SDL package did *NOT* run it's autogen.sh, which is why it touches also the configure. This came later, causing this behavior.

Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/

Quoted 7 lines
Quoted 1 line

Wow, amazing problem. Thanks a lot for getting to the bottom of it. The solution is indeed simple, but the investigation definitely wasn't (I've followed your conversation with Yann on IRC yesterday evening, and I remember quickly discussing the issue with you during the Buildroot Developer Days). Congrats!

Thank you.
A huge thanks to Yann E. Morin too as he put me on the right track and I stupidly forgot to add him as Cc: :/.

Quoted 6 lines

Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com