Marvell Armada 375 and 38x pinctrl drivers
Subsystems (3)
cover Marvell Armada 375 and 38x pinctrl drivers
Linus,
Here are two patches that add the pinctrl drivers for two new Marvell ARM SOCs that belong to the mach-mvebu family: the Armada 375 and the Armada 380/385. They are based on Cortex-A9 CPU cores, and share a number of peripherals with their predecessors in the mach-mvebu family. pinctrl-wise, they have a completely similar register layout than Armada 370/XP, so only a list of pins and functions has to be introduced, and therefore the drivers are straightforward.
The core support (arch/arm/mach-mvebu) for these SOCs will be posted shortly, and we're aiming at having this merged for 3.15 if possible.
Thanks!
Thomas
Thomas Petazzoni (2):
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385
.../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 8 + drivers/pinctrl/mvebu/Makefile | 2 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 ++++++++++++++++++++ drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 6 files changed, 1056 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.c
Signature · 1 line
1.8.3.2
PATCH 1/2 pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
The Marvell Armada 375 is a new ARM SoC from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing drivers/pinctrl/mvebu/ infrastructure, with no other changes that the list of pins and corresponding functions.
--- .../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ drivers/pinctrl/mvebu/Kconfig | 4 + drivers/pinctrl/mvebu/Makefile | 1 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 +++++++++++++++++++++ 4 files changed, 527 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c
Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt new file +81 -0
@@ -0,0 +1,81 @@ +* Marvell Armada 375 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6720-pinctrl" + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, dev(ad2), spi0(cs1), spi1(cs1) +mpp1 1 gpio, dev(ad3), spi0(mosi), spi1(mosi) +mpp2 2 gpio, dev(ad4), ptp(eventreq), led(c0), audio(sdi) +mpp3 3 gpio, dev(ad5), ptp(triggen), led(p3), audio(mclk) +mpp4 4 gpio, dev(ad6), spi0(miso), spi1(miso) +mpp5 5 gpio, dev(ad7), spi0(cs2), spi1(cs2) +mpp6 6 gpio, dev(ad0), led(p1), audio(rclk) +mpp7 7 gpio, dev(ad1), ptp(clk), led(p2), audio(extclk) +mpp8 8 gpio, dev (bootcs), spi0(cs0), spi1(cs0) +mpp9 9 gpio, nf(wen), spi0(sck), spi1(sck) +mpp10 10 gpio, nf(ren), dram(vttctrl), led(c1) +mpp11 11 gpio, dev(a0), led(c2), audio(sdo) +mpp12 12 gpio, dev(a1), audio(bclk) +mpp13 13 gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn) +mpp14 14 gpio, i2c0(sda), uart1(txd) +mpp15 15 gpio, i2c0(sck), uart1(rxd) +mpp16 16 gpio, uart0(txd) +mpp17 17 gpio, uart0(rxd) +mpp18 18 gpio, tdm(intn) +mpp19 19 gpio, tdm(rstn) +mpp20 20 gpio, tdm(pclk) +mpp21 21 gpio, tdm(fsync) +mpp22 22 gpio, tdm(drx) +mpp23 23 gpio, tdm(dtx) +mpp24 24 gpio, led(p0), ge1(rxd0), sd(cmd), uart0(rts) +mpp25 25 gpio, led(p2), ge1(rxd1), sd(d0), uart0(cts) +mpp26 26 gpio, pcie0(clkreq), ge1(rxd2), sd(d2), uart1(rts) +mpp27 27 gpio, pcie1(clkreq), ge1(rxd3), sd(d1), uart1(cts) +mpp28 28 gpio, led(p3), ge1(txctl), sd(clk) +mpp29 29 gpio, pcie1(clkreq), ge1(rxclk), sd(d3) +mpp30 30 gpio, ge1(txd0), spi1(cs0) +mpp31 31 gpio, ge1(txd1), spi1(mosi) +mpp32 32 gpio, ge1(txd2), spi1(sck), ptp(triggen) +mpp33 33 gpio, ge1(txd3), spi1(miso) +mpp34 34 gpio, ge1(txclkout), spi1(sck) +mpp35 35 gpio, ge1(rxctl), spi1(cs1), spi0(cs2) +mpp36 36 gpio, pcie0(clkreq) +mpp37 37 gpio, pcie0(clkreq), tdm(intn), ge(mdc) +mpp38 38 gpio, pcie1(clkreq), ge(mdio) +mpp39 39 gpio, ref(clkout) +mpp40 40 gpio, uart1(txd) +mpp41 41 gpio, uart1(rxd) +mpp42 42 gpio, spi1(cs2), led(c0) +mpp43 43 gpio, sata0(prsnt), dram(vttctrl) +mpp44 44 gpio, sata0(prsnt) +mpp45 45 gpio, spi0(cs2), pcie0(rstoutn) +mpp46 46 gpio, led(p0), ge0(txd0), ge1(txd0) +mpp47 47 gpio, led(p1), ge0(txd1), ge1(txd1) +mpp48 48 gpio, led(p2), ge0(txd2), ge1(txd2) +mpp49 49 gpio, led(p3), ge0(txd3), ge1(txd3) +mpp50 50 gpio, led(c0), ge0(rxd0), ge1(rxd0) +mpp51 51 gpio, led(c1), ge0(rxd1), ge1(rxd1) +mpp52 52 gpio, led(c2), ge0(rxd2), ge1(rxd2) +mpp53 53 gpio, pcie1(rstoutn), ge0(rxd3), ge1(rxd3) +mpp54 54 gpio, pcie0(rstoutn), ge0(rxctl), ge1(rxctl) +mpp55 55 gpio, ge0(rxclk), ge1(rxclk) +mpp56 56 gpio, ge0(txclkout), ge1(txclkout) +mpp57 57 gpio, ge0(txctl), ge1(txctl) +mpp58 58 gpio, led(c0) +mpp59 59 gpio, led(c1) +mpp60 60 gpio, uart1(txd), led(c2) +mpp61 61 gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0) +mpp62 62 gpio, i2c1(sck), led(p1) +mpp63 63 gpio, ptp(triggen), led(p2) +mpp64 64 gpio, dram(vttctrl), led(p3) +mpp65 65 gpio, sata1(prsnt) +mpp66 66 gpio, ptp(eventreq), spi1(cs3)
drivers/pinctrl/mvebu/Kconfig +4 -0
@@ -17,6 +17,10 @@ config PINCTRL_ARMADA_370 bool select PINCTRL_MVEBU +config PINCTRL_ARMADA_375 + bool + select PINCTRL_MVEBU + config PINCTRL_ARMADA_XP bool select PINCTRL_MVEBU
drivers/pinctrl/mvebu/Makefile +1 -0
@@ -2,4 +2,5 @@ obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o +obj-$(CONFIG_PINCTRL_ARMADA_375) += pinctrl-armada-375.o obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
drivers/pinctrl/mvebu/pinctrl-armada-375.c new file +441 -0
441 lines not on this page · raw message
Signature · 1 line
1.8.3.2
PATCH 1/2 pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
Quoted 10 lines · Thomas Petazzoni
The Marvell Armada 375 is a new ARM SoC from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing
drivers/pinctrl/mvebu/infrastructure, with no other changes that the list of pins and corresponding functions.Signed-off-by Thomas Petazzoni <[email protected]>Reviewed-by Gregory CLEMENT <[email protected]>
Sure, patch applied.
Yours,
Linus Walleij
PATCH 2/2 pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385
In reply to Thomas PetazzoniThe Marvell Armada 380/385 are new ARM SoCs from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing drivers/pinctrl/mvebu/ infrastructure, with no other changes that the list of pins and corresponding functions.
--- .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 4 + drivers/pinctrl/mvebu/Makefile | 1 + drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 4 files changed, 529 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.c
Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt new file +79 -0
@@ -0,0 +1,79 @@ +* Marvell Armada 380/385 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6810-pinctrl", "marvell,88f6820-pinctrl" or + "marvell,88f6828-pinctrl" depending on the specific variant of the + SoC being used. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, ua0(rxd) +mpp1 1 gpio, ua0(txd) +mpp2 2 gpio, i2c0(sck) +mpp3 3 gpio, i2c0(sda) +mpp4 4 gpio, ge(mdc), ua1(txd), ua0(rts) +mpp5 5 gpio, ge(mdio), ua1(rxd), ua0(cts) +mpp6 6 gpio, ge0(txclkout), ge0(crs), dev(cs3) +mpp7 7 gpio, ge0(txd0), dev(ad9) +mpp8 8 gpio, ge0(txd1), dev(ad10) +mpp9 9 gpio, ge0(txd2), dev(ad11) +mpp10 10 gpio, ge0(txd3), dev(ad12) +mpp11 11 gpio, ge0(txctl), dev(ad13) +mpp12 12 gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14) +mpp13 13 gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15) +mpp14 14 gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1) +mpp15 15 gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1] +mpp16 16 gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq) +mpp17 17 gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt) +mpp18 18 gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1] +mpp19 19 gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts) +mpp20 20 gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts) +mpp21 21 gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs) +mpp22 22 gpio, spi0(mosi), dev(ad0) +mpp23 23 gpio, spi0(sck), dev(ad2) +mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready) +mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0) +mpp26 26 gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1) +mpp27 27 gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2) +mpp28 28 gpio, ge1(txd0), sd0(clk), dev(ad5) +mpp29 29 gpio, ge1(txd1), dev(ale0) +mpp30 30 gpio, ge1(txd2), dev(oen) +mpp31 31 gpio, ge1(txd3), dev(ale1) +mpp32 32 gpio, ge1(txctl), dev(wen0) +mpp33 33 gpio, m(decc_err), dev(ad3) +mpp34 34 gpio, dev(ad1) +mpp35 35 gpio, ref(clk_out1), dev(a1) +mpp36 36 gpio, ptp(trig_gen), dev(a0) +mpp37 37 gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8) +mpp38 38 gpio, ptp(event_req), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4) +mpp39 39 gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2) +mpp40 40 gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6) +mpp41 41 gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last) +mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7) +mpp43 43 gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout) +mpp44 44 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout) +mpp45 45 gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout) +mpp46 46 gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout) +mpp47 47 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2] +mpp48 48 gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4) +mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5) +mpp50 50 gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd) +mpp51 51 gpio, tdm2c(dtx), audio(sdo), m(decc_err) +mpp52 52 gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6) +mpp53 53 gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7) +mpp54 54 gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3) +mpp55 55 gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0) +mpp56 56 gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi) +mpp57 57 gpio, spi1(sck), sd0(clk) +mpp58 58 gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1) +mpp59 59 gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2) + +[1]: only available on 88F6820 and 88F6828 +[2]: only available on 88F6828
drivers/pinctrl/mvebu/Kconfig +4 -0
@@ -21,6 +21,10 @@ config PINCTRL_ARMADA_375 bool select PINCTRL_MVEBU +config PINCTRL_ARMADA_38X + bool + select PINCTRL_MVEBU + config PINCTRL_ARMADA_XP bool select PINCTRL_MVEBU
drivers/pinctrl/mvebu/Makefile +1 -0
@@ -3,4 +3,5 @@ obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o obj-$(CONFIG_PINCTRL_ARMADA_375) += pinctrl-armada-375.o +obj-$(CONFIG_PINCTRL_ARMADA_38X) += pinctrl-armada-38x.o obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
drivers/pinctrl/mvebu/pinctrl-armada-38x.c new file +445 -0
445 lines not on this page · raw message
Signature · 1 line
1.8.3.2
PATCH 2/2 pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385
Quoted 9 lines · Thomas Petazzoni
The Marvell Armada 380/385 are new ARM SoCs from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing
drivers/pinctrl/mvebu/infrastructure, with no other changes that the list of pins and corresponding functions.Signed-off-by Thomas Petazzoni <[email protected]>
Patch applied.
Yours,
Linus Walleij
cover Marvell Armada 375 and 38x pinctrl drivers
In reply to Thomas PetazzoniQuoted 21 lines · Thomas Petazzoni
Linus,
Here are two patches that add the pinctrl drivers for two new Marvell ARM SOCs that belong to the mach-mvebu family: the Armada 375 and the Armada 380/385. They are based on Cortex-A9 CPU cores, and share a number of peripherals with their predecessors in the mach-mvebu family. pinctrl-wise, they have a completely similar register layout than Armada 370/XP, so only a list of pins and functions has to be introduced, and therefore the drivers are straightforward.
The core support (
arch/arm/mach-mvebu) for these SOCs will be posted shortly, and we're aiming at having this merged for 3.15 if possible.Thanks!
Thomas
Thomas Petazzoni (2):
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385
Quoted 11 lines
.../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 8 + drivers/pinctrl/mvebu/Makefile | 2 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 ++++++++++++++++++++ drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 6 files changed, 1056 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.c
For the whole series,
thx,
Jason.
cover Marvell Armada 375 and 38x pinctrl drivers
In reply to Thomas PetazzoniLinus,
Do you intend to integrate the following patches for 3.15 ? They have been Acked-by Jason Cooper, one of the mvebu maintainer, and are just additions of simple mvebu pinctrl drivers that follow the existing mvebu pinctrl common logic with nothing fancy.
We have agreed with Sebastian Hesselbarth, who is doing a more serious rework of the pinctrl mvebu stuff, that those two patches should go in first, so that they don't miss 3.15.
Thanks a lot,
Thomas
Quoted 33 lines · Thomas Petazzoni
Linus,
Here are two patches that add the pinctrl drivers for two new Marvell ARM SOCs that belong to the mach-mvebu family: the Armada 375 and the Armada 380/385. They are based on Cortex-A9 CPU cores, and share a number of peripherals with their predecessors in the mach-mvebu family. pinctrl-wise, they have a completely similar register layout than Armada 370/XP, so only a list of pins and functions has to be introduced, and therefore the drivers are straightforward.
The core support (
arch/arm/mach-mvebu) for these SOCs will be posted shortly, and we're aiming at having this merged for 3.15 if possible.Thanks!
Thomas
Thomas Petazzoni (2):
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385.../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 8 + drivers/pinctrl/mvebu/Makefile | 2 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 ++++++++++++++++++++ drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 6 files changed, 1056 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.c
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
cover Marvell Armada 375 and 38x pinctrl drivers
Linus,
Quoted 10 lines · Thomas Petazzoni
Linus,
Do you intend to integrate the following patches for 3.15 ? They have been Acked-by Jason Cooper, one of the mvebu maintainer, and are just additions of simple mvebu pinctrl drivers that follow the existing mvebu pinctrl common logic with nothing fancy.
We have agreed with Sebastian Hesselbarth, who is doing a more serious rework of the pinctrl mvebu stuff, that those two patches should go in first, so that they don't miss 3.15.
v4 of Sebastian's rework now depends on this series. As you've expressed consent with Sebastian's series going through mvebu/arm-soc, I'm going to go ahead and pull this into a topic branch as well.
If you'd like the mvebu pinctrl branches to go through your tree, just let me know and I'll send you a pull request for them.
thx,
Jason.
Quoted 46 lines · Thomas Petazzoni
Quoted 33 lines
Linus,
Here are two patches that add the pinctrl drivers for two new Marvell ARM SOCs that belong to the mach-mvebu family: the Armada 375 and the Armada 380/385. They are based on Cortex-A9 CPU cores, and share a number of peripherals with their predecessors in the mach-mvebu family. pinctrl-wise, they have a completely similar register layout than Armada 370/XP, so only a list of pins and functions has to be introduced, and therefore the drivers are straightforward.
The core support (
arch/arm/mach-mvebu) for these SOCs will be posted shortly, and we're aiming at having this merged for 3.15 if possible.Thanks!
Thomas
Thomas Petazzoni (2):
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385.../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 8 + drivers/pinctrl/mvebu/Makefile | 2 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 ++++++++++++++++++++ drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 6 files changed, 1056 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.cSignature · 8 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
cover Marvell Armada 375 and 38x pinctrl drivers
Quoted 1 line · Jason Cooper
v4 of Sebastian's rework now depends on this series.
Yeah I figured so much :-)
Quoted 3 lines
As you've
expressed consent with Sebastian's series going through mvebu/arm-soc, I'm going to go ahead and pull this into a topic branch as well.
I think it's better if I pull this massive set of pinctrl changes into the pinctrl tree, and then create an immutable branch for you to pull (and forward to ARM SoC).
Quoted 2 lines
If you'd like the mvebu pinctrl branches to go through your tree, just let me know and I'll send you a pull request for them.
That's better, so hit me with this!
I'll dequeue the stuff I queued so far and wait for this.
The reason I want this in the pinctrl tree is that people tend to start sending small fixes on top and it creates a mess routing those patches. And it blocks us from major refactorings. So better keep it in my tree.
Yours,
Linus Walleij
cover Marvell Armada 375 and 38x pinctrl drivers
Quoted 10 lines · Linus Walleij
Quoted 1 line · Jason Cooper
v4 of Sebastian's rework now depends on this series.
Yeah I figured so much :-)
Quoted 3 lines
As you've
expressed consent with Sebastian's series going through mvebu/arm-soc, I'm going to go ahead and pull this into a topic branch as well.
Quoted 8 lines
I think it's better if I pull this massive set of pinctrl changes into the pinctrl tree, and then create an immutable branch for you to pull (and forward to ARM SoC).
Quoted 2 lines
If you'd like the mvebu pinctrl branches to go through your tree, just let me know and I'll send you a pull request for them.
That's better, so hit me with this!
Will do in a day or two (needs some -next time). If you'd like to take a look now, This series is in mvebu/pinctrl-3xx, based on v3.14-rc1. Sebastian's series is in mvebu/pinctrl, also based on v3.14-rc1 and depending on mvebu/pinctrl-3xx.
The tree is at git://git.infradead.org/linux-mvebu.git
Quoted 1 line
I'll dequeue the stuff I queued so far and wait for this.
Ok.
Quoted 5 lines
The reason I want this in the pinctrl tree is that people tend to start sending small fixes on top and it creates a mess routing those patches. And it blocks us from major refactorings. So better keep it in my tree.
No problem. Thanks for letting us work it this way. The more testing time we get before the merge window, the better.
thx,
Jason.
cover Marvell Armada 375 and 38x pinctrl drivers
In reply to Thomas PetazzoniQuoted 21 lines · Thomas Petazzoni
Linus,
Here are two patches that add the pinctrl drivers for two new Marvell ARM SOCs that belong to the mach-mvebu family: the Armada 375 and the Armada 380/385. They are based on Cortex-A9 CPU cores, and share a number of peripherals with their predecessors in the mach-mvebu family. pinctrl-wise, they have a completely similar register layout than Armada 370/XP, so only a list of pins and functions has to be introduced, and therefore the drivers are straightforward.
The core support (
arch/arm/mach-mvebu) for these SOCs will be posted shortly, and we're aiming at having this merged for 3.15 if possible.Thanks!
Thomas
Thomas Petazzoni (2):
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375
pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385
Quoted 11 lines
.../pinctrl/marvell,armada-375-pinctrl.txt | 81 ++++ .../pinctrl/marvell,armada-38x-pinctrl.txt | 79 ++++ drivers/pinctrl/mvebu/Kconfig | 8 + drivers/pinctrl/mvebu/Makefile | 2 + drivers/pinctrl/mvebu/pinctrl-armada-375.c | 441 ++++++++++++++++++++ drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 445 +++++++++++++++++++++ 6 files changed, 1056 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-375.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-38x.c
Series tentatively applied to mvebu/pinctrl-3xx. Will wait for input from Linus on his preference for going through the pinctrl tree or the arm-soc tree.
thx,
Jason.