ARM: shmobile: set proper DMA masks for Ether devices
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for NETIF_F_HIGHDMA & NETIF_F_SG would be added to the 'sh_eth' driver, the DMA masks should start to matter...
---
The patch is against 'renesas-devel-v3.14-rc1-20140207' tag in Simon Horman's 'renesas.git' repo...
arch/arm/mach-shmobile/board-armadillo800eva.c | 2 ++ arch/arm/mach-shmobile/board-bockw.c | 21 ++++++++++++++------- arch/arm/mach-shmobile/board-genmai.c | 19 ++++++++++++++----- arch/arm/mach-shmobile/board-koelsch.c | 16 ++++++++++++---- arch/arm/mach-shmobile/board-lager.c | 19 ++++++++++++++----- 5 files changed, 56 insertions(+), 21 deletions(-)
Index: renesas/arch/arm/mach-shmobile/board-armadillo800eva.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-armadillo800eva.c +++ renesas/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -383,6 +383,8 @@ static struct platform_device sh_eth_dev
.id = -1,
.dev = {
.platform_data = &sh_eth_platdata,
+ .dma_mask = &sh_eth_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = sh_eth_resources,
.num_resources = ARRAY_SIZE(sh_eth_resources),
Index: renesas/arch/arm/mach-shmobile/board-bockw.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c +++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -1,9 +1,9 @@
/*
* Bock-W board support
*
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <[email protected]>
- * Copyright (C) 2013 Cogent Embedded, Inc.
+ * Copyright (C) 2013-2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -235,6 +235,17 @@ static struct sh_eth_plat_data ether_pla
.no_ether_link = 1,
};
+static struct platform_device_info ether_info __initdata = {
+ .parent = &platform_bus,
+ .name = "r8a777x-ether",
+ .id = -1,
+ .res = ether_resources,
+ .num_res = ARRAY_SIZE(ether_resources),
+ .data = ðer_platform_data,
+ .size_data = sizeof(ether_platform_data),
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
{
@@ -592,11 +603,7 @@ static void __init bockw_init(void)
r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices();
- platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
- ether_resources, - ARRAY_SIZE(ether_resources), - ðer_platform_data, - sizeof(ether_platform_data));
+ platform_device_register_full(ðer_info);
platform_device_register_full(&vin0_info);
/* VIN1 has a pin conflict with Ether */
Index: renesas/arch/arm/mach-shmobile/board-genmai.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-genmai.c +++ renesas/arch/arm/mach-shmobile/board-genmai.c
@@ -1,8 +1,9 @@
/*
* Genmai board support
*
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -43,6 +44,17 @@ static const struct resource ether_resou
DEFINE_RES_IRQ(gic_iid(359)),
};
+static const struct platform_device_info ether_info __initconst = {
+ .parent = &platform_bus,
+ .name = "r7s72100-ether",
+ .id = -1,
+ .res = ether_resources,
+ .num_res = ARRAY_SIZE(ether_resources),
+ .data = ðer_pdata,
+ .size_data = sizeof(ether_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/* RSPI */
#define RSPI_RESOURCE(idx, baseaddr, irq) \
static const struct resource rspi##idx##_resources[] __initconst = { \
@@ -82,10 +94,7 @@ static void __init genmai_add_standard_d
r7s72100_clock_init();
r7s72100_add_dt_devices();
- platform_device_register_resndata(&platform_bus, "r7s72100-ether", -1,
- ether_resources, - ARRAY_SIZE(ether_resources), - ðer_pdata, sizeof(ether_pdata));
+ platform_device_register_full(ðer_info);
r7s72100_register_rspi(0);
r7s72100_register_rspi(1);
Index: renesas/arch/arm/mach-shmobile/board-koelsch.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-koelsch.c +++ renesas/arch/arm/mach-shmobile/board-koelsch.c
@@ -109,6 +109,17 @@ static const struct resource ether_resou
DEFINE_RES_IRQ(gic_spi(162)),
};
+static const struct platform_device_info ether_info __initconst = {
+ .parent = &platform_bus,
+ .name = "r8a7791-ether",
+ .id = -1,
+ .res = ether_resources,
+ .num_res = ARRAY_SIZE(ether_resources),
+ .data = ðer_pdata,
+ .size_data = sizeof(ether_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/* LEDS */
static struct gpio_led koelsch_leds[] = {
{
@@ -297,10 +308,7 @@ static void __init koelsch_add_standard_
ARRAY_SIZE(koelsch_pinctrl_map));
r8a7791_pinmux_init(); r8a7791_add_standard_devices();
- platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
- ether_resources, - ARRAY_SIZE(ether_resources), - ðer_pdata, sizeof(ether_pdata));
+ platform_device_register_full(ðer_info);
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&koelsch_leds_pdata, sizeof(koelsch_leds_pdata));
Index: renesas/arch/arm/mach-shmobile/board-lager.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-lager.c +++ renesas/arch/arm/mach-shmobile/board-lager.c
@@ -1,8 +1,9 @@
/*
* Lager board support
*
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -260,6 +261,17 @@ static const struct resource ether_resou
DEFINE_RES_IRQ(gic_spi(162)),
};
+static const struct platform_device_info ether_info __initconst = {
+ .parent = &platform_bus,
+ .name = "r8a7790-ether",
+ .id = -1,
+ .res = ether_resources,
+ .num_res = ARRAY_SIZE(ether_resources),
+ .data = ðer_pdata,
+ .size_data = sizeof(ether_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
static struct mtd_partition spi_flash_part[] = {
/* Reserved for user loader program, read-only */
@@ -681,10 +693,7 @@ static void __init lager_add_standard_de
mmcif1_resources, ARRAY_SIZE(mmcif1_resources), &mmcif1_pdata, sizeof(mmcif1_pdata));
- platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
- ether_resources, - ARRAY_SIZE(ether_resources), - ðer_pdata, sizeof(ether_pdata));
+ platform_device_register_full(ðer_info);
lager_add_du_device();
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Quoted 7 lines · Sergei Shtylyov
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for
NETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver, the DMA masks should start to matter...Signed-off-by Sergei Shtylyov <[email protected]>
Hi Sergei,
please split this series up so there is a separate patch for each board.
Thanks
Quoted 11 lines
---
The patch is against 'renesas-devel-v3.14-rc1-20140207' tag in Simon Horman's 'renesas.git' repo...arch/arm/mach-shmobile/board-armadillo800eva.c | 2 ++ arch/arm/mach-shmobile/board-bockw.c | 21 ++++++++++++++------- arch/arm/mach-shmobile/board-genmai.c | 19 ++++++++++++++----- arch/arm/mach-shmobile/board-koelsch.c | 16 ++++++++++++---- arch/arm/mach-shmobile/board-lager.c | 19 ++++++++++++++----- 5 files changed, 56 insertions(+), 21 deletions(-)
Hello.
Quoted 11 lines · Simon Horman
Quoted 7 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for
NETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver, the DMA masks should start to matter...Signed-off-by Sergei Shtylyov <[email protected]>Hi Sergei,
please split this series up so there is a separate patch for each board.
Hm, I, contrariwise, gathered all board patches in the single patch. Could
you elaborate on why you deem it necessary to split it?
Quoted 1 line
Thanks
WBR, Sergei
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Quoted 10 lines · Sergei Shtylyov
Hello.
Quoted 5 lines · Simon Horman
Quoted 5 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for
NETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver, the DMA masks should start to matter...
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>Hi Sergei,
please split this series up so there is a separate patch for each board.
Hm, I, contrariwise, gathered all board patches in the single
patch. Could you elaborate on why you deem it necessary to split it?
In my experience it helps to have the patches split out for two reasons:
1. If there is a problem on one board its patch can be reverted without having to bother with making a partial revert in order to leave the other boards alone.
2. It makes backporting easier in the case where there is interest in one board but not another.
Moreover, the boards are separate entities and in general I would like their patches to be separate. The same goes for SoCs.
I realise this is more fine-grained than what other maintainers prefer but it is an approach that seems to work well for us.
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
In reply to Sergei ShtylyovQuoted 7 lines · Sergei Shtylyov
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for
NETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver, the DMA masks should start to matter...Signed-off-by Sergei Shtylyov <[email protected]>
Hi, do you have a git branch available with all the changes for getting ethernet working on rcar please?
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Hello.
Quoted 10 lines · Ben Dooks
Quoted 7 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but in the future, when support for
NETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver, the DMA masks should start to matter...Signed-off-by Sergei Shtylyov <[email protected]>Hi, do you have a git branch available with all the changes for getting ethernet working on rcar please?
Depends on whether you want it working via DT or mere platform devices. If
the second, it's 3.14-rc1. If DT, I don't have a branch, only several patches to apply atop of the current 'renesas.git' repo's 'devel' branch that I've posted last week (note that only R8A779x is currently supported by these patches and NFS boot timeout is still an issue with them).
WBR, Sergei
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Quoted 18 lines · Sergei Shtylyov
Hello.
Quoted 9 lines · Ben Dooks
Quoted 8 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability. Currently, the code works without DMA masks but in the future, when
support forNETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver,
the DMA masks should start to matter...Quoted 4 lines
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>Hi, do you have a git branch available with all the changes for getting ethernet working on rcar please?
Quoted 6 lines
Depends on whether you want it working via DT or mere platform
devices. If the second, it's 3.14-rc1. If DT, I don't have a branch, only several patches to apply atop of the current 'renesas.git' repo's 'devel' branch that I've posted last week (note that only R8A779x is currently supported by these patches and NFS boot timeout is still an issue with them).
ok, I have a slightly earlier version which seems to work with nfs boot for me.
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Hello.
Quoted 21 lines · Ben Dooks
Quoted 14 lines
Quoted 9 lines
Quoted 8 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability. Currently, the code works without DMA masks but in the future, when
support forNETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver,
the DMA masks should start to matter...Quoted 4 lines
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>Hi, do you have a git branch available with all the changes for getting ethernet working on rcar please?
Quoted 6 lines
Depends on whether you want it working via DT or mere platform
devices. If the second, it's 3.14-rc1. If DT, I don't have a branch, only several patches to apply atop of the current 'renesas.git' repo's 'devel' branch that I've posted last week (note that only R8A779x is currently supported by these patches and NFS boot timeout is still an issue with them).
Quoted 2 lines
ok, I have a slightly earlier version which seems to work with nfs boot for me.
There's no "slightly earlier version" (unless you mean DT support for
BOCK-W posted months ago). Issue with NFS is not fatal, it boots fine, just somewhat slow.
WBR, Sergei
PATCH 1/1 ARM: shmobile: set proper DMA masks for Ether devices
Quoted 26 lines · Sergei Shtylyov
Hello.
Quoted 21 lines · Ben Dooks
Quoted 21 lines
Quoted 10 lines
Quoted 9 lines
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability. Currently, the code works without DMA masks but in the future, when
support forNETIF_F_HIGHDMA&NETIF_F_SGwould be added to the 'sh_eth' driver,
the DMA masks should start to matter...Quoted 4 lines
Quoted 1 line
Signed-off-by Sergei Shtylyov <[email protected]>Hi, do you have a git branch available with all the changes for getting ethernet working on rcar please?
Depends on whether you want it working via DT or mere platform
devices. If the second, it's 3.14-rc1. If DT, I don't have a branch, only several patches to apply atop of the current 'renesas.git' repo's 'devel' branch that I've posted last week (note that only R8A779x is currently supported by these patches and NFS boot timeout is still an issue with them).
Quoted 6 lines
Quoted 2 lines
ok, I have a slightly earlier version which seems to work with nfs boot for me.
There's no "slightly earlier version" (unless you mean DT support
for BOCK-W posted months ago). Issue with NFS is not fatal, it boots fine, just somewhat slow.
I think actually the version we have in our tree may be an rework of that. It is a while since we looked at it.
My aim is to rebuild on the newer release and use that going forward as we are trying to stick as close as possible to the mainline.
Signature · 2 lines
Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius