ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
Subsystems (6)
PATCH 1/1 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
If CLK_SET_RATE_PARENT is set for a clkoutx2 clock, calling clk_set_rate() on the clock "skips" the x2 multiplier as there are no set_rate and round_rate functions defined for the clkoutx2.
This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when d0f58bd3bba3877fb1af4664c4e33273d36f00e4 and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework and CLK_SET_RATE_PARENT.
This patch implements set_rate and round_rate for clkoutx2.
Tested on OMAP3430, OMAP3630, OMAP4460.
--- arch/arm/mach-omap2/cclock3xxx_data.c | 2 + arch/arm/mach-omap2/dpll3xxx.c | 92 +++++++++++++++++++++++++++++------ include/linux/clk/ti.h | 4 ++ 3 files changed, 83 insertions(+), 15 deletions(-)
arch/arm/mach-omap2/cclock3xxx_data.c +2 -0
@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = { .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .set_rate = &omap3_clkoutx2_set_rate, .recalc_rate = &omap3_clkoutx2_recalc, + .round_rate = &omap3_clkoutx2_round_rate, };static const struct clk_ops dpll4_m5x2_ck_3630_ops = {
arch/arm/mach-omap2/dpll3xxx.c +77 -15
116 lines not on this page · raw message
include/linux/clk/ti.h +4 -0
@@ -245,6 +245,10 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,void omap2_init_clk_clkdm (struct clk_hw *clk);unsigned long omap3_clkoutx2_recalc (struct clk_hw *hw,unsigned long parent_rate); +int omap3_clkoutx2_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate); +long omap3_clkoutx2_round_rate (struct clk_hw *hw,unsigned long rate, +unsigned long *prate);int omap2_clkops_enable_clkdm (struct clk_hw *hw);void omap2_clkops_disable_clkdm (struct clk_hw *hw);int omap2_clk_disable_autoidle_all (void );
Signature · 1 line
1.8.3.2
Tony Lindgren
maintainerPATCH 1/1 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
Quoted 10 lines · Tomi Valkeinen
If
CLK_SET_RATE_PARENTis set for a clkoutx2 clock, callingclk_set_rate()on the clock "skips" the x2 multiplier as there are noset_rateandround_ratefunctions defined for the clkoutx2.This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when
d0f58bd3bba3877fb1af4664c4e33273d36f00e4and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework andCLK_SET_RATE_PARENT.
Quoted 5 lines
This patch implements
set_rateandround_ratefor clkoutx2.Tested on OMAP3430, OMAP3630, OMAP4460.
Signed-off-by Tomi Valkeinen <[email protected]>
Would like to see acks from Paul and Tero on this too before applying.
Tony
Quoted 161 lines
--- arch/arm/mach-omap2/cclock3xxx_data.c | 2 + arch/arm/mach-omap2/dpll3xxx.c | 92 +++++++++++++++++++++++++++++------ include/linux/clk/ti.h | 4 ++ 3 files changed, 83 insertions(+), 15 deletions(-)arch/arm/mach-omap2/cclock3xxx_data.c +2
-0@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = { .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .set_rate = &omap3_clkoutx2_set_rate, .recalc_rate = &omap3_clkoutx2_recalc, + .round_rate = &omap3_clkoutx2_round_rate, };static const struct clk_ops dpll4_m5x2_ck_3630_ops = {arch/arm/mach-omap2/dpll3xxx.c +77
-15@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)/* Clock control for DPLL outputs */ +/* Find the parent DPLL for the given clkoutx2 clock */ +static struct clk_hw_omap *omap3_find_clkoutx2_dpll (struct clk_hw *hw) +{ +struct clk_hw_omap *pclk =NULL ; +struct clk *parent; + +/* Walk up the parents of clk, looking for a DPLL */ +do { +do { + parent =__clk_get_parent (hw->clk); + hw =__clk_get_hw (parent); + }while (hw && (__clk_get_flags (hw->clk) &CLK_IS_BASIC )); +if (!hw) +break ; + pclk =to_clk_hw_omap (hw); + }while (pclk && !pclk->dpll_data); + +/* clk does not have a DPLL as a parent? error in the clock data */ +if (!pclk) { +WARN_ON (1 ); +return NULL ; + } + +return pclk; +} +/** * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate * @clk: DPLL output struct clk @@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,unsigned long rate;u32 v;struct clk_hw_omap *pclk =NULL ; -struct clk *parent;if (!parent_rate)return 0 ; -/* Walk up the parents of clk, looking for a DPLL */ -do { -do { - parent =__clk_get_parent (hw->clk); - hw =__clk_get_hw (parent); - }while (hw && (__clk_get_flags (hw->clk) &CLK_IS_BASIC )); -if (!hw) -break ; - pclk =to_clk_hw_omap (hw); - }while (pclk && !pclk->dpll_data); + pclk =omap3_find_clkoutx2_dpll (hw); -/* clk does not have a DPLL as a parent? error in the clock data */ -if (!pclk) { -WARN_ON (1 ); +if (!pclk)return 0 ; - } dd = pclk->dpll_data;@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,return rate; } +int omap3_clkoutx2_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate) +{ +return 0 ; +} + +long omap3_clkoutx2_round_rate (struct clk_hw *hw,unsigned long rate, +unsigned long *prate) +{ +const struct dpll_data *dd; +u32 v; +struct clk_hw_omap *pclk =NULL ; + +if (!*prate) +return 0 ; + + pclk =omap3_find_clkoutx2_dpll (hw); + +if (!pclk) +return 0 ; + + dd = pclk->dpll_data; + +/* TYPE J does not have a clkoutx2 */ +if (dd->flags &DPLL_J_TYPE ) { + *prate =__clk_round_rate (__clk_get_parent (pclk->hw.clk), rate); +return *prate; + } + +WARN_ON (!dd->enable_mask); + + v =omap2_clk_readl (pclk, dd->control_reg) & dd->enable_mask; + v >>=__ffs (dd->enable_mask); + +/* If in bypass, the rate is fixed to the bypass rate*/ +if (v !=OMAP3XXX_EN_DPLL_LOCKED ) +return *prate; + +if (__clk_get_flags (hw->clk) &CLK_SET_RATE_PARENT ) { +unsigned long best_parent; + + best_parent = (rate /2 ); + *prate =__clk_round_rate (__clk_get_parent (hw->clk), + best_parent); + } + +return *prate *2 ; +} +/* OMAP3/4 non-CORE DPLL clkops */ const struct clk_hw_omap_ops clkhwops_omap3_dpll = { .allow_idle = omap3_dpll_allow_idle,include/linux/clk/ti.h +4
-0@@ -245,6 +245,10 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,void omap2_init_clk_clkdm (struct clk_hw *clk);unsigned long omap3_clkoutx2_recalc (struct clk_hw *hw,unsigned long parent_rate); +int omap3_clkoutx2_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate); +long omap3_clkoutx2_round_rate (struct clk_hw *hw,unsigned long rate, +unsigned long *prate);int omap2_clkops_enable_clkdm (struct clk_hw *hw);void omap2_clkops_disable_clkdm (struct clk_hw *hw);int omap2_clk_disable_autoidle_all (void );Signature · 1 line
1.8.3.2
PATCH 1/1 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
Quoted 11 lines · Tony Lindgren
Quoted 10 lines · Tomi Valkeinen
If
CLK_SET_RATE_PARENTis set for a clkoutx2 clock, callingclk_set_rate()on the clock "skips" the x2 multiplier as there are noset_rateandround_ratefunctions defined for the clkoutx2.This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when
d0f58bd3bba3877fb1af4664c4e33273d36f00e4and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework andCLK_SET_RATE_PARENT.
Quoted 7 lines
Quoted 5 lines
This patch implements
set_rateandround_ratefor clkoutx2.Tested on OMAP3430, OMAP3630, OMAP4460.
Signed-off-by Tomi Valkeinen <[email protected]>Would like to see acks from Paul and Tero on this too before applying.
Looks good to me, so ack. However, one approach to fix this problem would be just to delete cclock3xxx_data.c file, as the same issue is inherently fixed in DT boot.
Do you want the patch for deleting cclock3xxx_data.c already btw? :)
-Tero
Quoted 164 lines
Tony
Quoted 161 lines
--- arch/arm/mach-omap2/cclock3xxx_data.c | 2 + arch/arm/mach-omap2/dpll3xxx.c | 92 +++++++++++++++++++++++++++++------ include/linux/clk/ti.h | 4 ++ 3 files changed, 83 insertions(+), 15 deletions(-)arch/arm/mach-omap2/cclock3xxx_data.c +2
-0@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = { .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, + .set_rate = &omap3_clkoutx2_set_rate, .recalc_rate = &omap3_clkoutx2_recalc, + .round_rate = &omap3_clkoutx2_round_rate, };static const struct clk_ops dpll4_m5x2_ck_3630_ops = {arch/arm/mach-omap2/dpll3xxx.c +77
-15@@ -623,6 +623,32 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)/* Clock control for DPLL outputs */ +/* Find the parent DPLL for the given clkoutx2 clock */ +static struct clk_hw_omap *omap3_find_clkoutx2_dpll (struct clk_hw *hw) +{ +struct clk_hw_omap *pclk =NULL ; +struct clk *parent; + +/* Walk up the parents of clk, looking for a DPLL */ +do { +do { + parent =__clk_get_parent (hw->clk); + hw =__clk_get_hw (parent); + }while (hw && (__clk_get_flags (hw->clk) &CLK_IS_BASIC )); +if (!hw) +break ; + pclk =to_clk_hw_omap (hw); + }while (pclk && !pclk->dpll_data); + +/* clk does not have a DPLL as a parent? error in the clock data */ +if (!pclk) { +WARN_ON (1 ); +return NULL ; + } + +return pclk; +} +/** * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate * @clk: DPLL output struct clk @@ -637,27 +663,14 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,unsigned long rate;u32 v;struct clk_hw_omap *pclk =NULL ; -struct clk *parent;if (!parent_rate)return 0 ; -/* Walk up the parents of clk, looking for a DPLL */ -do { -do { - parent =__clk_get_parent (hw->clk); - hw =__clk_get_hw (parent); - }while (hw && (__clk_get_flags (hw->clk) &CLK_IS_BASIC )); -if (!hw) -break ; - pclk =to_clk_hw_omap (hw); - }while (pclk && !pclk->dpll_data); + pclk =omap3_find_clkoutx2_dpll (hw); -/* clk does not have a DPLL as a parent? error in the clock data */ -if (!pclk) { -WARN_ON (1 ); +if (!pclk)return 0 ; - } dd = pclk->dpll_data;@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,return rate; } +int omap3_clkoutx2_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate) +{ +return 0 ; +} + +long omap3_clkoutx2_round_rate (struct clk_hw *hw,unsigned long rate, +unsigned long *prate) +{ +const struct dpll_data *dd; +u32 v; +struct clk_hw_omap *pclk =NULL ; + +if (!*prate) +return 0 ; + + pclk =omap3_find_clkoutx2_dpll (hw); + +if (!pclk) +return 0 ; + + dd = pclk->dpll_data; + +/* TYPE J does not have a clkoutx2 */ +if (dd->flags &DPLL_J_TYPE ) { + *prate =__clk_round_rate (__clk_get_parent (pclk->hw.clk), rate); +return *prate; + } + +WARN_ON (!dd->enable_mask); + + v =omap2_clk_readl (pclk, dd->control_reg) & dd->enable_mask; + v >>=__ffs (dd->enable_mask); + +/* If in bypass, the rate is fixed to the bypass rate*/ +if (v !=OMAP3XXX_EN_DPLL_LOCKED ) +return *prate; + +if (__clk_get_flags (hw->clk) &CLK_SET_RATE_PARENT ) { +unsigned long best_parent; + + best_parent = (rate /2 ); + *prate =__clk_round_rate (__clk_get_parent (hw->clk), + best_parent); + } + +return *prate *2 ; +} +/* OMAP3/4 non-CORE DPLL clkops */ const struct clk_hw_omap_ops clkhwops_omap3_dpll = { .allow_idle = omap3_dpll_allow_idle,include/linux/clk/ti.h +4
-1@@ -245,6 +245,10 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,void omap2_init_clk_clkdm (struct clk_hw *clk);unsigned long omap3_clkoutx2_recalc (struct clk_hw *hw,unsigned long parent_rate); +int omap3_clkoutx2_set_rate (struct clk_hw *hw,unsigned long rate, +unsigned long parent_rate); +long omap3_clkoutx2_round_rate (struct clk_hw *hw,unsigned long rate, +unsigned long *prate);int omap2_clkops_enable_clkdm (struct clk_hw *hw);void omap2_clkops_disable_clkdm (struct clk_hw *hw);int omap2_clk_disable_autoidle_all (void ); --1.8.3.2
Paul Walmsley
maintainerPATCH 1/1 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
In reply to Tomi ValkeinenQuoted 10 lines · Tomi Valkeinen
If
CLK_SET_RATE_PARENTis set for a clkoutx2 clock, callingclk_set_rate()on the clock "skips" the x2 multiplier as there are noset_rateandround_ratefunctions defined for the clkoutx2.This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when
d0f58bd3bba3877fb1af4664c4e33273d36f00e4and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework andCLK_SET_RATE_PARENT.
Quoted 5 lines
This patch implements
set_rateandround_ratefor clkoutx2.Tested on OMAP3430, OMAP3630, OMAP4460.
Signed-off-by Tomi Valkeinen <[email protected]>
Thanks, queued for v3.14-rc with Tero's ack.
- Paul