Skip to contentSkip to conversation

pxe: prepend fdtdir to DTB name irrespective of source

PATCH In review Stephen Warren 3 participants 5 messages Feb 12, 2014 – Feb 21, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pxe: prepend fdtdir to DTB name irrespective of source

From: Stephen Warren <[email protected]>

The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name.

Fixes c61d94d86035 ("pxe: implement fdtdir extlinux.conf tag")
---
 common/cmd_pxe.c | 77 +++++++++++++++++++++++++++++---------------------------
 1 file changed, 40 insertions(+), 37 deletions(-)
common/cmd_pxe.c +40 -37
index 29e48db20416..6aabd1357c7f 100644
@@ -700,44 +700,47 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label)
 		if (label->fdt) {
 			fdtfile = label->fdt;
 		} else if (label->fdtdir) {
-			fdtfile = getenv("fdtfile");
-			/*
-			 * For complex cases, it might be worth calling a
-			 * board- or SoC-provided function here to provide a
-			 * better default:
-			 *
-			 * if (!fdtfile)
-			 *     fdtfile = gen_fdtfile();
-			 *
-			 * If this is added, be sure to keep the default below,
-			 * or move it to the default weak implementation of
-			 * gen_fdtfile().
-			 */
-			if (!fdtfile) {
-				char *soc = getenv("soc");
-				char *board = getenv("board");
-				char *slash;
-
-				len = strlen(label->fdtdir);
-				if (!len)
-					slash = "./";
-				else if (label->fdtdir[len - 1] != '/')
-					slash = "/";
-				else
-					slash = "";
-
-				len = strlen(label->fdtdir) + strlen(slash) +
-					strlen(soc) + 1 + strlen(board) + 5;
-				fdtfilefree = malloc(len);
-				if (!fdtfilefree) {
-					printf("malloc fail (FDT filename)\n");
-					return 1;
-				}
-
-				snprintf(fdtfilefree, len, "%s%s%s-%s.dtb",
-					label->fdtdir, slash, soc, board);
-				fdtfile = fdtfilefree;
+			char *f1, *f2, *f3, *f4, *slash;
+
+			f1 = getenv("fdtfile");
+			if (f1) {
+				f2 = "";
+				f3 = "";
+				f4 = "";
+			} else {
+				/*
+				 * For complex cases where this code doesn't
+				 * generate the correct filename, the board
+				 * code should set $fdtfile during early boot,
+				 * or the boot scripts should set $fdtfile
+				 * before invoking "pxe" or "sysboot".
+				 */
+				f1 = getenv("soc");
+				f2 = "-";
+				f3 = getenv("board");
+				f4 = ".dtb";
+			}
+
+			len = strlen(label->fdtdir);
+			if (!len)
+				slash = "./";
+			else if (label->fdtdir[len - 1] != '/')
+				slash = "/";
+			else
+				slash = "";
+
+			len = strlen(label->fdtdir) + strlen(slash) +
+				strlen(f1) + strlen(f2) + strlen(f3) +
+				strlen(f4) + 1;
+			fdtfilefree = malloc(len);
+			if (!fdtfilefree) {
+				printf("malloc fail (FDT filename)\n");
+				return 1;
 			}
+
+			snprintf(fdtfilefree, len, "%s%s%s%s%s%s",
+				 label->fdtdir, slash, f1, f2, f3, f4);
+			fdtfile = fdtfilefree;
 		}
 
 		if (fdtfile) {
Signature · 1 line
1.8.1.5
#1 lore raw

PATCH 1/1 pxe: prepend fdtdir to DTB name irrespective of source

Quoted 7 lines · On Wed, 12 Feb 2014 14:30:04 -0700 Stephen Warren <[email protected]> wrote:

From: Stephen Warren <[email protected]>

The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name.

Thanks for the fix

#2 lore raw

PATCH 1/1 pxe: prepend fdtdir to DTB name irrespective of source

Quoted 11 lines · Dennis Gilmore
Quoted 7 lines · On Wed, 12 Feb 2014 14:30:04 -0700 Stephen Warren <[email protected]> wrote:

From: Stephen Warren <[email protected]>

The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name.

Quoted 4 lines

Thanks for the fix

Tom, does this patch look good?

#3 lore raw

PATCH 1/1 pxe: prepend fdtdir to DTB name irrespective of source

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 12 lines · Stephen Warren
Quoted 11 lines · Dennis Gilmore
Quoted 7 lines · On Wed, 12 Feb 2014 14:30:04 -0700 Stephen Warren <[email protected]> wrote:

From: Stephen Warren <[email protected]>

The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name.

Quoted 6 lines
Quoted 4 lines

Thanks for the fix

Tom, does this patch look good?

Yes. Sorry, I'm doing the following today:
- - Clean out patches in my TODO list older than v9 of the kbuild series (done).
- - Do v9 of kbuild series (in progress)
- - Do stuff after v9 of kbuild series (hopefully later today).

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJTBOOuAAoJENk4IS6UOR1WhggP/1QSELUbzznfDUNcapSG9lhO 8tZTUGgmTaKTr2v6ruRHyKbf4RnzP+RfJrecXLXqdR2ymEzhS1Xs0TSrCBApAYub R2YFnvJWwH53IsZcwgH4B6zdGbO+OaaNcwL9waJ9aoXaSKYeiktrZQCEf8KYUx5r UaPAD/fPW7BygAjwys03YlVxW4GEsxfRGWXU7I/6uT+ytBXgbNkbHmkXcYSp0LpG YLbhc6pUZtkXTw8tXoKc6oxW+LNpVxdLZhtbPdse/h2T3SSGuuqnky1/agrlYXtg tJ3rOBmIP5n1Z2dvTLMTS58kB+lZssxcGcsDcMLT2BLZiPhhseISte4NMgBedk/E GMhOpvIktDa1VWShjOo5EI/8NFRO7mlhGqfFWV3HoO25olBdPGtHj9UZQJkOeKni pT/2OoGTjM+Wq/F2ybrUDOpRKBVwC+OjgTZ8trgmXiJMEaBspa+aE7w5k5FAoK3E IF6zE9HN6nEu68DP2XAV1ySKn8WAiet/6P6ePf9AI4C+H5XEUVmdscOsCymiu5or saORS7GrHd3CAJzSZtGDVjnCcAfg4W9Cwb5IVfWyfN4H0f0sx7RkbV6CfwK3AdPQ f/YhOtt4LDR9yY063bag7SX6rFStdWm3UUcmOhCtms2rZI2ueU0VPB4lR/k7wtyY SaBqo0iDDaUeeTeIWlan
=bbfE
-----END PGP SIGNATURE-----

#4 lore raw
In reply to Stephen Warren
Quoted 8 lines · Stephen Warren

From: Stephen Warren <[email protected]>

The directory name from an fdtdir directive in a PXE config file should always be pre-pended to the DTB filename; it shouldn't matter whether the DTB filename came from the $fdtfile environment variable, or whether it was constructed dynamically from ${soc}-${board}.dtb. Fix the code to always prepend the directory name.

Quoted 5 lines
Fixes c61d94d86035 ("pxe: implement fdtdir extlinux.conf tag")

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/b3514107/attachment.pgp>