genirq: Add functions to avoid driver hackery
Subsystems (2)
cover genirq: Add functions to avoid driver hackery
Russell tricked me to look into the homebrewn kthread hackery of drivers/mmc. I'm still trying to recover from that.
But it spurred an interesting discussion how to improve things and the outcome was the following series of patches:
1) Provide means to synchronize only hard irq context
2) Provide means to trigger a threaded irq handler from any context
The main rationale is to cleanup the mess in drivers/mmc and other places but each of the patches has a justification for itself exemplified by the drivers/mmc use case, which is explained in detail in the changelogs of the individual patches.
Russell has a working implementation for sdhci which relies on patch #1 ready and quite some ideas how to make use of #2 to kill the sdio_irq kthread hackery.
Thanks,
tglx
PATCH 1/2 genirq: Provide synchronize_hardirq()
synchronize_irq() waits for hard irq and threaded handlers to complete before returning. For some special cases we only need to make sure that the hard interrupt part of the irq line is not in progress when we disabled the - possibly shared - interrupt at the device level.
A proper use case for this was provided by Russell. The sdhci driver requires some irq triggered functions to be run in thread context. The current implementation of the thread context is a sdio private kthread construct, which has quite some shortcomings. These can be avoided when the thread is directly associated to the device interrupt via the generic threaded irq infrastructure.
Though there is a corner case related to run time power management where one side disables the device interrupts at the device level and needs to make sure, that an already running hard interrupt handler has completed before proceeding further. Though that hard interrupt handler might wake the associated thread, which in turn can request the runtime PM to reenable the device. Using synchronize_irq() leads to an immediate deadlock of the irq thread waiting for the PM lock and the synchronize_irq() waiting for the irq thread to complete.
Due to the fact that it is sufficient for this case to ensure that no hard irq handler is executing a new function which avoids the check for the thread is required.
Add a function, which just monitors the hard irq parts and ignores the threaded handlers.
--- include/linux/hardirq.h | 1 kernel/irq/manage.c | 67 +++++++++++++++++++++++++++++++++--------------- 2 files changed, 48 insertions(+), 20 deletions(-)
include/linux/hardirq.h +1 -0
@@ -9,6 +9,7 @@extern void synchronize_irq (unsigned int irq); +extern void synchronize_hardirq (unsigned int irq);#if defined(CONFIG_TINY_RCU )
kernel/irq/manage.c +47 -20
83 lines not on this page · raw message
Re: [patch 1/2] genirq: Provide synchronize_hardirq()
Quoted 21 lines · Thomas Gleixner
synchronize_irq()waits for hard irq and threaded handlers to complete before returning. For some special cases we only need to make sure that the hard interrupt part of the irq line is not in progress when we disabled the - possibly shared - interrupt at the device level.A proper use case for this was provided by Russell. The sdhci driver requires some irq triggered functions to be run in thread context. The current implementation of the thread context is a sdio private kthread construct, which has quite some shortcomings. These can be avoided when the thread is directly associated to the device interrupt via the generic threaded irq infrastructure.
Though there is a corner case related to run time power management where one side disables the device interrupts at the device level and needs to make sure, that an already running hard interrupt handler has completed before proceeding further. Though that hard interrupt handler might wake the associated thread, which in turn can request the runtime PM to reenable the device. Using
synchronize_irq()leads to an immediate deadlock of the irq thread waiting for the PM lock and thesynchronize_irq()waiting for the irq thread to complete.
Quoted 8 lines
Due to the fact that it is sufficient for this case to ensure that no hard irq handler is executing a new function which avoids the check for the thread is required.
Add a function, which just monitors the hard irq parts and ignores the threaded handlers.
Signed-off-by Thomas Gleixner <[email protected]>
tip-bot for Thomas Gleixner
merge bot[tip:irq/core] genirq: Provide synchronize_hardirq()
In reply to Thomas Gleixnergenirq: Provide synchronize_hardirq()
Commit-ID: 18258f7239a61d8929b8e0c7b6d46c446459074c Gitweb: http://git.kernel.org/tip/18258f7239a61d8929b8e0c7b6d46c446459074c Author: Thomas Gleixner <[email protected]> AuthorDate: Sat, 15 Feb 2014 00:55:18 +0000 Committer: Thomas Gleixner <[email protected]> CommitDate: Wed, 19 Feb 2014 17:22:44 +0100
genirq: Provide synchronize_hardirq()
synchronize_irq() waits for hard irq and threaded handlers to complete before returning. For some special cases we only need to make sure that the hard interrupt part of the irq line is not in progress when we disabled the - possibly shared - interrupt at the device level.
A proper use case for this was provided by Russell. The sdhci driver requires some irq triggered functions to be run in thread context. The current implementation of the thread context is a sdio private kthread construct, which has quite some shortcomings. These can be avoided when the thread is directly associated to the device interrupt via the generic threaded irq infrastructure.
Though there is a corner case related to run time power management where one side disables the device interrupts at the device level and needs to make sure, that an already running hard interrupt handler has completed before proceeding further. Though that hard interrupt handler might wake the associated thread, which in turn can request the runtime PM to reenable the device. Using synchronize_irq() leads to an immediate deadlock of the irq thread waiting for the PM lock and the synchronize_irq() waiting for the irq thread to complete.
Due to the fact that it is sufficient for this case to ensure that no hard irq handler is executing a new function which avoids the check for the thread is required.
Add a function, which just monitors the hard irq parts and ignores the threaded handlers.
--- include/linux/hardirq.h | 1 + kernel/irq/manage.c | 70 +++++++++++++++++++++++++++++++++++-------------- 2 files changed, 51 insertions(+), 20 deletions(-)
include/linux/hardirq.h +1 -0
@@ -9,6 +9,7 @@extern void synchronize_irq (unsigned int irq); +extern void synchronize_hardirq (unsigned int irq);#if defined(CONFIG_TINY_RCU )
kernel/irq/manage.c +50 -20
86 lines not on this page · raw message
PATCH 2/2 genirq: Provide irq_wake_thread()
In reply to Thomas GleixnerIn course of the sdhci/sdio discussion with Russell about killing the sdio kthread hackery we discovered the need to be able to wake an interrupt thread from software.
The rationale for this is, that sdio hardware can lack proper interrupt support for certain features. So the driver needs to poll the status registers, but at the same time it needs to be woken up by an hardware interrupt.
To be able to get rid of the home brewn kthread construct of sdio we need a way to wake an irq thread independent of an actual hardware interrupt.
Provide an irq_wake_thread() function which wakes up the thread which is associated to a given dev_id. This allows sdio to invoke the irq thread from the hardware irq handler via the IRQ_WAKE_THREAD return value and provides a possibility to wake it via a timer for the polling scenarios. That allows to simplify the sdio logic significantly.
--- include/linux/interrupt.h | 1 + kernel/irq/handle.c | 4 ++-- kernel/irq/internals.h | 1 + kernel/irq/manage.c | 27 +++++++++++++++++++++++++++ 4 files changed, 31 insertions(+), 2 deletions(-)
include/linux/interrupt.h +1 -0
@@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irqextern void disable_percpu_irq (unsigned int irq);extern void enable_irq (unsigned int irq);extern void enable_percpu_irq (unsigned int irq,unsigned int type); +extern void irq_wake_thread (unsigned int irq,void *dev_id);/* The following three functions are for the core kernel use only. */ extern void suspend_device_irqs (void );
kernel/irq/handle.c +2 -2
@@ -51,7 +51,7 @@ static void warn_no_thread(unsigned int "but no thread function available.", irq, action->name); } -static void irq_wake_thread (struct irq_desc *desc,struct irqaction *action) +void __irq_wake_thread (struct irq_desc *desc,struct irqaction *action) {/* * In case the thread crashed and was killed we just pretend that
@@ -157,7 +157,7 @@ handle_irq_event_percpu(struct irq_descbreak ; } -irq_wake_thread (desc, action); +__irq_wake_thread (desc, action);/* Fall through to add to randomness */ case IRQ_HANDLED :
kernel/irq/internals.h +1 -0
@@ -82,6 +82,7 @@ irqreturn_t handle_irq_event(struct irq_/* Resending of interrupts :*/ void check_irq_resend (struct irq_desc *desc,unsigned int irq);bool irq_wait_for_poll (struct irq_desc *desc); +void __irq_wake_thread (struct irq_desc *desc,struct irqaction *action);#ifdef CONFIG_PROC_FS extern void register_irq_proc (unsigned int irq,struct irq_desc *desc);
kernel/irq/manage.c +27 -0
@@ -908,6 +908,33 @@ static int irq_thread(void *data)return 0 ; } +/** +* irq_wake_thread - wake the irq thread for the action identified by dev_id +* @irq: Interrupt line +* @dev_id: Device identity for which the thread should be woken +* +*/ +void irq_wake_thread (unsigned int irq,void *dev_id) +{ +struct irq_desc *desc =irq_to_desc (irq); +struct irqaction *action; +unsigned long flags; + +if (!desc ||WARN_ON (irq_settings_is_per_cpu_devid (desc))) +return ; + +raw_spin_lock_irqsave (&desc->lock, flags); +for (action = desc->action; action; action = action->next) { +if (action->dev_id == dev_id) { +if (action->thread) +__irq_wake_thread (desc, action); +break ; + } + } +raw_spin_unlock_irqrestore (&desc->lock, flags); +} +EXPORT_SYMBOL_GPL (irq_wake_thread); +static void irq_setup_forced_threading (struct irqaction *new) {if (!force_irqthreads)
Re: [patch 2/2] genirq: Provide irq_wake_thread()
Quoted 13 lines · Thomas Gleixner
In course of the sdhci/sdio discussion with Russell about killing the sdio kthread hackery we discovered the need to be able to wake an interrupt thread from software.
The rationale for this is, that sdio hardware can lack proper interrupt support for certain features. So the driver needs to poll the status registers, but at the same time it needs to be woken up by an hardware interrupt.
To be able to get rid of the home brewn kthread construct of sdio we need a way to wake an irq thread independent of an actual hardware interrupt.
Quoted 8 lines
Provide an
irq_wake_thread()function which wakes up the thread which is associated to a givendev_id. This allows sdio to invoke the irq thread from the hardware irq handler via theIRQ_WAKE_THREADreturn value and provides a possibility to wake it via a timer for the polling scenarios. That allows to simplify the sdio logic significantly.Signed-off-by Thomas Gleixner <[email protected]>
tip-bot for Thomas Gleixner
merge bot[tip:irq/core] genirq: Provide irq_wake_thread()
In reply to Thomas Gleixnergenirq: Provide irq_wake_thread()
Commit-ID: a92444c6b2225a9115d661c950cb48a22aeace20 Gitweb: http://git.kernel.org/tip/a92444c6b2225a9115d661c950cb48a22aeace20 Author: Thomas Gleixner <[email protected]> AuthorDate: Sat, 15 Feb 2014 00:55:19 +0000 Committer: Thomas Gleixner <[email protected]> CommitDate: Wed, 19 Feb 2014 17:22:44 +0100
genirq: Provide irq_wake_thread()
In course of the sdhci/sdio discussion with Russell about killing the sdio kthread hackery we discovered the need to be able to wake an interrupt thread from software.
The rationale for this is, that sdio hardware can lack proper interrupt support for certain features. So the driver needs to poll the status registers, but at the same time it needs to be woken up by an hardware interrupt.
To be able to get rid of the home brewn kthread construct of sdio we need a way to wake an irq thread independent of an actual hardware interrupt.
Provide an irq_wake_thread() function which wakes up the thread which is associated to a given dev_id. This allows sdio to invoke the irq thread from the hardware irq handler via the IRQ_WAKE_THREAD return value and provides a possibility to wake it via a timer for the polling scenarios. That allows to simplify the sdio logic significantly.
--- include/linux/interrupt.h | 1 + kernel/irq/handle.c | 4 ++-- kernel/irq/internals.h | 1 + kernel/irq/manage.c | 27 +++++++++++++++++++++++++++ 4 files changed, 31 insertions(+), 2 deletions(-)
include/linux/interrupt.h +1 -0
@@ -188,6 +188,7 @@ extern void disable_irq(unsigned int irq);extern void disable_percpu_irq (unsigned int irq);extern void enable_irq (unsigned int irq);extern void enable_percpu_irq (unsigned int irq,unsigned int type); +extern void irq_wake_thread (unsigned int irq,void *dev_id);/* The following three functions are for the core kernel use only. */ extern void suspend_device_irqs (void );
kernel/irq/handle.c +2 -2
@@ -51,7 +51,7 @@ static void warn_no_thread(unsigned int irq, struct irqaction *action) "but no thread function available.", irq, action->name); } -static void irq_wake_thread (struct irq_desc *desc,struct irqaction *action) +void __irq_wake_thread (struct irq_desc *desc,struct irqaction *action) {/* * In case the thread crashed and was killed we just pretend that
@@ -157,7 +157,7 @@ handle_irq_event_percpu(struct irq_desc *desc, struct irqaction *action)break ; } -irq_wake_thread (desc, action); +__irq_wake_thread (desc, action);/* Fall through to add to randomness */ case IRQ_HANDLED :
kernel/irq/internals.h +1 -0
@@ -82,6 +82,7 @@ irqreturn_t handle_irq_event(struct irq_desc *desc);/* Resending of interrupts :*/ void check_irq_resend (struct irq_desc *desc,unsigned int irq);bool irq_wait_for_poll (struct irq_desc *desc); +void __irq_wake_thread (struct irq_desc *desc,struct irqaction *action);#ifdef CONFIG_PROC_FS extern void register_irq_proc (unsigned int irq,struct irq_desc *desc);
kernel/irq/manage.c +27 -0
@@ -911,6 +911,33 @@ static int irq_thread(void *data)return 0 ; } +/** +* irq_wake_thread - wake the irq thread for the action identified by dev_id +* @irq: Interrupt line +* @dev_id: Device identity for which the thread should be woken +* +*/ +void irq_wake_thread (unsigned int irq,void *dev_id) +{ +struct irq_desc *desc =irq_to_desc (irq); +struct irqaction *action; +unsigned long flags; + +if (!desc ||WARN_ON (irq_settings_is_per_cpu_devid (desc))) +return ; + +raw_spin_lock_irqsave (&desc->lock, flags); +for (action = desc->action; action; action = action->next) { +if (action->dev_id == dev_id) { +if (action->thread) +__irq_wake_thread (desc, action); +break ; + } + } +raw_spin_unlock_irqrestore (&desc->lock, flags); +} +EXPORT_SYMBOL_GPL (irq_wake_thread); +static void irq_setup_forced_threading (struct irqaction *new) {if (!force_irqthreads)