Skip to contentSkip to conversation

pinctrl-sunxi: various fixes

PATCH New Hans de Goede 3 participants 11 messages Feb 17, 2014 – Feb 25, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 pinctrl-sunxi: various fixes

Hi Linus,

Here are 4 fixes for pinctrl-sunxi, the first one was send a long time ago, but somehow never managed to find its way into 3.14-rc3. An identical patch to the second one was already send by Chen-Yu Tsai, we both came up with the same fix separately, it is included merely for completeness. Patches 3 and 4 are new and should speak for themselves.

I believe all of this is stable material. I've neglected to add a CC: stable myself, if you agree this is stable material please do so.

Thanks & Regards,

Hans

#1 lore raw

PATCH 1/4 pinctrl-sunxi: Fix sun5i-a13 port F multiplexing

The correct value for selecting the mmc0 function on port F pins is 2 not 4, as per the data-sheet:
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf

---
 drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/pinctrl/pinctrl-sunxi-pins.h +6 -6
index 6fd8d4d..3d60669 100644
@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i_a13_pins[] = {
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D1 */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* D1 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D0 */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* D0 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* CLK */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* CLK */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* CMD */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* CMD */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D3 */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* D3 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D2 */
+		  SUNXI_FUNCTION(0x2, "mmc0")),		/* D2 */
 	/* Hole */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
Signature · 1 line
1.8.5.3
#3 lore raw

PATCH 2/4 pinctrl-sunxi: Fix hang on gpio irq

In reply to Hans de Goede

Our irq handler was missing chained_irq_enter / exit calls, causing a hard hang as soon as a gpio irq happened.

---
 drivers/pinctrl/pinctrl-sunxi.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/pinctrl/pinctrl-sunxi.c +5 -0
index 74635cc..cc9bd1b 100644
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -665,9 +666,12 @@ static struct irq_chip sunxi_pinctrl_irq_chip = {
 
 static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_get_chip(irq);
 	struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
 	const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
 
+	chained_irq_enter(chip, desc);
+
 	/* Clear all interrupts */
 	writel(reg, pctl->membase + IRQ_STATUS_REG);
 
@@ -679,6 +683,7 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
 			generic_handle_irq(pin_irq);
 		}
 	}
+	chained_irq_exit(chip, desc);
 }
 
 static struct of_device_id sunxi_pinctrl_match[] = {
Signature · 1 line
1.8.5.3
#4 lore raw

PATCH 2/4 pinctrl-sunxi: Fix hang on gpio irq

Quoted 4 lines · Hans de Goede

Our irq handler was missing chained_irq_enter / exit calls, causing a hard hang as soon as a gpio irq happened.

I have already applied the identical patch from
Chen-Yu Tsai for fixes so dropping this.

Yours,
Linus Walleij

#5 lore raw

PATCH 3/4 pinctrl-sunxi: Fix masking when setting irq type

In reply to Hans de Goede
---
 drivers/pinctrl/pinctrl-sunxi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/pinctrl-sunxi.c +1 -1
index cc9bd1b..917af0a 100644
@@ -583,7 +583,7 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d,
 	spin_lock_irqsave(&pctl->lock, flags);
 
 	regval = readl(pctl->membase + reg);
-	regval &= ~IRQ_CFG_IRQ_MASK;
+	regval &= ~(IRQ_CFG_IRQ_MASK << index);
 	writel(regval | (mode << index), pctl->membase + reg);
 
 	spin_unlock_irqrestore(&pctl->lock, flags);
Signature · 1 line
1.8.5.3
#6 lore raw

PATCH 3/4 pinctrl-sunxi: Fix masking when setting irq type

Hi,

Quoted 1 line · Hans de Goede
Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140218/3e77537a/attachment.sig>
#8 lore raw

PATCH 4/4 pinctrl-sunxi: Fix interrupt register offset calculation

In reply to Hans de Goede

This fixing setting the interrupt type for eints >= 8.

---
 drivers/pinctrl/pinctrl-sunxi.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/pinctrl/pinctrl-sunxi.h +3 -3
index 01c494f..552b0e9 100644
@@ -511,7 +511,7 @@ static inline u32 sunxi_pull_offset(u16 pin)
 
 static inline u32 sunxi_irq_cfg_reg(u16 irq)
 {
-	u8 reg = irq / IRQ_CFG_IRQ_PER_REG;
+	u8 reg = irq / IRQ_CFG_IRQ_PER_REG * 0x04;
 	return reg + IRQ_CFG_REG;
 }
 
@@ -523,7 +523,7 @@ static inline u32 sunxi_irq_cfg_offset(u16 irq)
 
 static inline u32 sunxi_irq_ctrl_reg(u16 irq)
 {
-	u8 reg = irq / IRQ_CTRL_IRQ_PER_REG;
+	u8 reg = irq / IRQ_CTRL_IRQ_PER_REG * 0x04;
 	return reg + IRQ_CTRL_REG;
 }
 
@@ -535,7 +535,7 @@ static inline u32 sunxi_irq_ctrl_offset(u16 irq)
 
 static inline u32 sunxi_irq_status_reg(u16 irq)
 {
-	u8 reg = irq / IRQ_STATUS_IRQ_PER_REG;
+	u8 reg = irq / IRQ_STATUS_IRQ_PER_REG * 0x04;
 	return reg + IRQ_STATUS_REG;
 }
 
Signature · 1 line
1.8.5.3
#9 lore raw

PATCH 4/4 pinctrl-sunxi: Fix interrupt register offset calculation

Quoted 3 lines · Hans de Goede

This fixing setting the interrupt type for eints >= 8.

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140218/f4608c70/attachment.sig>