Exynos5250: Remove lowlevelinit
PATCH 1/1 Exynos5250: Remove lowlevelinit
From: Rajeshwari S Shinde <[email protected]>
Since we use CONFIG_SKIP_LOWLEVEL_INIT for Exynos baords, we dont need to a lowlevel_init.S file.
--- board/samsung/smdk5250/lowlevel_init.S | 82 ---------------------------------- 1 file changed, 82 deletions(-) delete mode 100644 board/samsung/smdk5250/lowlevel_init.S
board/samsung/smdk5250/lowlevel_init.S deleted +0 -82
@@ -1,82 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - - /* use iRAM stack in bl2 */ - ldr sp, =CONFIG_IRAM_STACK - stmdb r13!, {ip,lr} - - /* check reset status */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in RAM, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_init - -1: - bl arch_cpu_init - bl tzpc_init - ldmia r13!, {ip,pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos5_cpu_resume function*/ - ldr r1, [r0] - - /* Jump to kernel */ - mov pc, r1 - nop - nop
Signature · 1 line
1.7.12.4
PATCH 1/1 Exynos5250: Remove lowlevelinit
Hi Rajeshwari,
Quoted 7 lines · Rajeshwari Shinde
From: Rajeshwari S Shinde <[email protected]>
Since we use
CONFIG_SKIP_LOWLEVEL_INITfor Exynos baords, we dont need to alowlevel_init.Sfile.Signed-off-by Rajeshwari S Shinde <[email protected]>---
Builds fine on my side, and as it just removes dead code, I've assigned this patch to myself and will include it in my next PR. Thanks!
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 Exynos5250: Remove lowlevelinit
Hi Albert,
Quoted 7 lines · Albert ARIBAUD
Hi Rajeshwari,
Quoted 2 lines · Rajeshwari Shinde
From: Rajeshwari S Shinde <[email protected]>
Quoted 8 lines
Quoted 5 lines
Since we use
CONFIG_SKIP_LOWLEVEL_INITfor Exynos baords, we dont need to alowlevel_init.Sfile.Signed-off-by Rajeshwari S Shinde <[email protected]>---
Builds fine on my side, and as it just removes dead code, I've assigned this patch to myself and will include it in my next PR. Thanks!
Sure Thanx
Signature · 2 lines
Regards, Rajeshwari Shinde
Quoted 8 lines
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 Exynos5250: Remove lowlevelinit
In reply to Rajeshwari ShindeQuoted 6 lines · Rajeshwari Shinde
From: Rajeshwari S Shinde <[email protected]>
Since we use
CONFIG_SKIP_LOWLEVEL_INITfor Exynos baords, we dont need to alowlevel_init.Sfile.Signed-off-by Rajeshwari S Shinde <[email protected]>
PATCH 1/1 Exynos5250: Remove lowlevelinit
In reply to Rajeshwari ShindeHi Rajeshwari,
Quoted 89 lines · Rajeshwari Shinde
From: Rajeshwari S Shinde <[email protected]>
Since we use
CONFIG_SKIP_LOWLEVEL_INITfor Exynos baords, we dont need to alowlevel_init.Sfile.Signed-off-by Rajeshwari S Shinde <[email protected]>--- board/samsung/smdk5250/lowlevel_init.S | 82 ---------------------------------- 1 file changed, 82 deletions(-) delete mode 100644 board/samsung/smdk5250/lowlevel_init.Sboard/samsung/smdk5250/lowlevel_init.S deleted +0
-72@@ -1,82 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - - /* use iRAM stack in bl2 */ - ldr sp, =CONFIG_IRAM_STACK - stmdb r13!, {ip,lr} - - /* check reset status */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in RAM, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_init - -1: - bl arch_cpu_init - bl tzpc_init - ldmia r13!, {ip,pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup:
board/samsung/smdk5250/lowlevel_init.S line 82
Quoted 10 lines
board/samsung/smdk5250/lowlevel_init.S deleted +0
-10- /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos5_cpu_resume function*/ - ldr r1, [r0] - - /* Jump to kernel */ - mov pc, r1 - nop - nop
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.