Skip to contentSkip to conversation

ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

PATCH New Hauke Mehrtens 3 participants 8 messages Feb 3, 2014 – Feb 19, 2014

Subsystems (6)
lore
Share & tools
lore

Hauke Mehrtens

author maintainer
#0 lore raw

v8 cover ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

This adds initial support for Broadcom network SoC from the BCM5301X and BCM470X line.

I do not have any documentation, only the vendor source code published by Asus and Netgear to conform with the GPL, it would be nice to get some documentation for this Soc like this
https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf
for the Broadcom BCM440X Ethernet controller.

With some additional patches I got Ethernet working with ~250 MBit/s.

A bootlog can be found here:
http://hauke-m.de/files/openwrt/devices/R6250/openwrt-boot-2014-01-05.txt

This is based on 3.14-rc1.

Christian Daudt could you please take these patches.

Changes since v7:
* reorder debug options
* rebase on 3.14-rc1

Changes since v6:
* rebase on arm-soc.git branch next/soc
* use ranges in dts files for SoC blocks

Changes since v5:
* restructured the dts files, own file for the SoC family, the SoC and the device

Changes since v4:
* removed bcm5301x_timer_init(), this function is not needed
* removed GENERIC_TIME this is dead
* made fault handler check for code and just catch the first fault.

Changes since v3:
* rebase on Linus 3.13-rc7
* split the workaround into an own patch
* add L2 cache controller to Device tree
* rename config option
* add local-timer and SCU entry to device tree

Changes since v2:
* use vendor prefix brcm
* move code to arch/arm/mach-bcm/
* cleanup arch/arm/mach-bcm/bcm5301x.c
* rename to bcm5301x
* split into more patches

Changes since v1:
* add file Documentation/devicetree/bindings/arm/bcm4708.txt
* rename bcm5301x to bcm4708 in dts files
* use preprocessor includes in dts file
* add CONFIG_ARCH_BCM53XX to multi_v7_defconfig
* remove init_machine callback
* rename vendor prefix from brcm to bcm
* split into two patches

Hauke Mehrtens (4):
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM
CPU
ARM: BCM5301X: add early debugging support
ARM: BCM5301X: add dts files for BCM4708 SoC
ARM: BCM5301X: workaround suppress fault

 Documentation/devicetree/bindings/arm/bcm4708.txt |    8 ++
 MAINTAINERS                                       |    8 ++
 arch/arm/Kconfig.debug                            |    7 ++
 arch/arm/boot/dts/Makefile                        |    1 +
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts       |   35 ++++++++
 arch/arm/boot/dts/bcm4708.dtsi                    |   34 ++++++++
 arch/arm/boot/dts/bcm5301x.dtsi                   |   95 +++++++++++++++++++++
 arch/arm/configs/multi_v7_defconfig               |    1 +
 arch/arm/mach-bcm/Kconfig                         |   26 ++++++
 arch/arm/mach-bcm/Makefile                        |    1 +
 arch/arm/mach-bcm/bcm_5301x.c                     |   61 +++++++++++++
 11 files changed, 277 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt
 create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 create mode 100644 arch/arm/boot/dts/bcm4708.dtsi
 create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi
 create mode 100644 arch/arm/mach-bcm/bcm_5301x.c
Signature · 1 line
1.7.10.4
author maintainer
#1 lore raw

PATCH v8 1/4 ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ...
I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing.

This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller.

This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here:
http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers

---
 Documentation/devicetree/bindings/arm/bcm4708.txt |    8 ++++++
 MAINTAINERS                                       |    8 ++++++
 arch/arm/configs/multi_v7_defconfig               |    1 +
 arch/arm/mach-bcm/Kconfig                         |   26 +++++++++++++++++++
 arch/arm/mach-bcm/Makefile                        |    1 +
 arch/arm/mach-bcm/bcm_5301x.c                     |   28 +++++++++++++++++++++
 6 files changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt
 create mode 100644 arch/arm/mach-bcm/bcm_5301x.c
Documentation/devicetree/bindings/arm/bcm4708.txt new file +8 -0
new file mode 100644
index 0000000..6b0f49f
@@ -0,0 +1,8 @@
+Broadcom BCM4708 device tree bindings
+-------------------------------------------
+
+Boards with the BCM4708 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm4708";
MAINTAINERS +8 -0
index b2cf5cf..156de64 100644
@@ -1880,6 +1880,14 @@ F:	arch/arm/boot/dts/bcm2835*
 F:	arch/arm/configs/bcm2835_defconfig
 F:	drivers/*/*bcm2835*
 
+BROADCOM BCM5301X ARM ARCHICTURE
+M:	Hauke Mehrtens <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org
+S:	Maintained
+F:	arch/arm/mach-bcm/bcm_5301x.c
+F:	arch/arm/boot/dts/bcm5301x.dtsi
+F:	arch/arm/boot/dts/bcm470*
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Nithin Nayak Sujir <[email protected]>
 M:	Michael Chan <[email protected]>
arch/arm/configs/multi_v7_defconfig +1 -0
index 845bc74..b4b658d 100644
@@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
arch/arm/mach-bcm/Kconfig +26 -0
index b1aa6a9..6201c18 100644
@@ -32,6 +32,32 @@ config ARCH_BCM_MOBILE
 	  BCM11130, BCM11140, BCM11351, BCM28145 and
 	  BCM28155 variants.
 
+config ARCH_BCM_5301X
+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	depends on MMU
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select MIGHT_HAVE_PCI
+	help
+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+	  This is a network SoC line mostly used in home routers and
+	  wifi access points, it's internal name is Northstar.
+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+	  BCM4708 and BCM4709.
+
+	  Do not confuse this with the BCM4760 which is a totally
+	  different SoC or with the older BCM47XX and BCM53XX based
+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
 endmenu
 
 endif
arch/arm/mach-bcm/Makefile +1 -0
index c2ccd5a..0164913 100644
@@ -13,3 +13,4 @@
 obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
arch/arm/mach-bcm/bcm_5301x.c new file +28 -0
new file mode 100644
index 0000000..ef9740a
@@ -0,0 +1,28 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ *
+ * Copyright 2013 Hauke Mehrtens <[email protected]>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+
+
+static void __init bcm5301x_dt_init(void)
+{
+	l2x0_of_init(0, ~0UL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char __initconst *bcm5301x_dt_compat[] = {
+	"brcm,bcm4708",
+	NULL,
+};
+
+DT_MACHINE_START(BCM5301X, "BCM5301X")
+	.init_machine	= bcm5301x_dt_init,
+	.dt_compat	= bcm5301x_dt_compat,
+MACHINE_END
Signature · 1 line
1.7.10.4
author maintainer
#2 lore raw

PATCH v8 2/4 ARM: BCM5301X: add early debugging support

In reply to Hauke Mehrtens

This adds support for early debugging of BCM5301X SoC.

---
 arch/arm/Kconfig.debug |    7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/Kconfig.debug +7 -0
index 0531da8..315ce91 100644
@@ -106,6 +106,11 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X UART1"
+		depends on ARCH_BCM_5301X
+		select DEBUG_UART_PL01X
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM
@@ -1023,6 +1028,7 @@ config DEBUG_UART_PHYS
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1071,6 +1077,7 @@ config DEBUG_UART_VIRT
 	default 0xf0009000 if DEBUG_CNS3XXX
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
Signature · 1 line
1.7.10.4
author maintainer
#3 lore raw

PATCH v8 3/4 ARM: BCM5301X: add dts files for BCM4708 SoC

In reply to Hauke Mehrtens

This uses the newly added BCM5301X SoC code.

---
 arch/arm/boot/dts/Makefile                  |    1 +
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts |   35 ++++++++++
 arch/arm/boot/dts/bcm4708.dtsi              |   34 ++++++++++
 arch/arm/boot/dts/bcm5301x.dtsi             |   95 +++++++++++++++++++++++++++
 4 files changed, 165 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 create mode 100644 arch/arm/boot/dts/bcm4708.dtsi
 create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi
arch/arm/boot/dts/Makefile +1 -0
index b9d6a8b..b72e359 100644
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb	\
 	berlin2cd-google-chromecast.dtb
arch/arm/boot/dts/bcm4708-netgear-r6250.dts new file +35 -0
new file mode 100644
index 0000000..3b5259d
@@ -0,0 +1,35 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <[email protected]>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chipcommonA {
+		uart0: serial at 0300 {
+			status = "okay";
+		};
+
+		uart1: serial at 0400 {
+			status = "okay";
+		};
+	};
+};
arch/arm/boot/dts/bcm4708.dtsi new file +34 -0
new file mode 100644
index 0000000..31141e8
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <[email protected]>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+};
arch/arm/boot/dts/bcm5301x.dtsi new file +95 -0

95 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author maintainer
#4 lore raw

PATCH v8 4/4 ARM: BCM5301X: workaround suppress fault

In reply to Hauke Mehrtens

Without this patch I am getting a unhandled fault exception like this one after "Freeing unused kernel memory":

Freeing unused kernel memory: 1260K (c02c1000 - c03fc000) Unhandled fault: imprecise external abort (0x1c06) at 0xb6f89005

Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007

The address which is here 0xb6f89005 changes from boot to boot, with a new build the changes are bigger. With kernel 3.10 I have also seen this fault at different places in the boot process, but starting with 3.11 they are always occurring after the "Freeing unused kernel memory" message. I never was able to completely boot to userspace without this handler. The abort code is constant 0x1c06. This fault just happens once in the boot process I have never seen it happing twice or more.

I also tried changing the CPSR.A bit to 0 in init_early, with this code like Afzal suggested, but that did not change anything:
asm volatile("mrs r12, cpsr\n"

	"bic r12, r12, #0x00000100\n"
	"msr cpsr_c, r12" ::: "r12", "cc", "memory");

Disabling the L2 cache by building with CONFIG_CACHE_L2X0 unset did not help.

This workaround was copied from the vendor code including most of the comments. It says it they think this is caused by the CFE boot loader used on this device. I do not have any access to any datasheet or errata document to check this.

---
 arch/arm/mach-bcm/bcm_5301x.c |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
arch/arm/mach-bcm/bcm_5301x.c +33 -0
index ef9740a..edff6976 100644
@@ -9,8 +9,40 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
 
 
+static bool first_fault = true;
+
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	if (fsr == 0x1c06 && first_fault) {
+		first_fault = false;
+
+		/*
+		 * These faults with code 0x1c06 happens for no good reason,
+		 * possibly left over from the CFE boot loader.
+		 */
+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+		addr, fsr);
+
+		/* Returning non-zero causes fault display and panic */
+		return 0;
+	}
+
+	/* Others should cause a fault */
+	return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+	/* Install our hook */
+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+
 static void __init bcm5301x_dt_init(void)
 {
 	l2x0_of_init(0, ~0UL);
@@ -23,6 +55,7 @@ static const char __initconst *bcm5301x_dt_compat[] = {
 };
 
 DT_MACHINE_START(BCM5301X, "BCM5301X")
+	.init_early	= bcm5301x_init_early,
 	.init_machine	= bcm5301x_dt_init,
 	.dt_compat	= bcm5301x_dt_compat,
 MACHINE_END
Signature · 1 line
1.7.10.4
#5 lore raw

v8 cover ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

In reply to Hauke Mehrtens

Hi Christian,

Le 03/02/2014 15:01, Hauke Mehrtens a ?crit :

Quoted 9 lines

This adds initial support for Broadcom network SoC from the BCM5301X and BCM470X line.

I do not have any documentation, only the vendor source code published by Asus and Netgear to conform with the GPL, it would be nice to get some documentation for this Soc like this
https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf
for the Broadcom BCM440X Ethernet controller.

Quoted 8 lines

With some additional patches I got Ethernet working with ~250 MBit/s.

A bootlog can be found here:
http://hauke-m.de/files/openwrt/devices/R6250/openwrt-boot-2014-01-05.txt

This is based on 3.14-rc1.

Christian Daudt could you please take these patches.

Christian, have you been able to get a look at those patches? How do you want to proceed for patches affecting bcm5301x in the future? Except for a few cases (Kconfig, Makefile), support for bcm5301x is orthogonal to the other bcm-mobile SoCs, should that be taken care of by the arm-soc maintainers directly?

Thanks!

Quoted 66 lines

Changes since v7:
* reorder debug options
* rebase on 3.14-rc1

Changes since v6:
* rebase on arm-soc.git branch next/soc
* use ranges in dts files for SoC blocks

Changes since v5:
* restructured the dts files, own file for the SoC family, the SoC and the device

Changes since v4:
* removed bcm5301x_timer_init(), this function is not needed
* removed GENERIC_TIME this is dead
* made fault handler check for code and just catch the first fault.

Changes since v3:
* rebase on Linus 3.13-rc7
* split the workaround into an own patch
* add L2 cache controller to Device tree
* rename config option
* add local-timer and SCU entry to device tree

Changes since v2:
* use vendor prefix brcm
* move code to arch/arm/mach-bcm/
* cleanup arch/arm/mach-bcm/bcm5301x.c
* rename to bcm5301x
* split into more patches

Changes since v1:
* add file Documentation/devicetree/bindings/arm/bcm4708.txt
* rename bcm5301x to bcm4708 in dts files
* use preprocessor includes in dts file
* add CONFIG_ARCH_BCM53XX to multi_v7_defconfig
* remove init_machine callback
* rename vendor prefix from brcm to bcm
* split into two patches

Hauke Mehrtens (4):
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM
CPU
ARM: BCM5301X: add early debugging support
ARM: BCM5301X: add dts files for BCM4708 SoC
ARM: BCM5301X: workaround suppress fault

  Documentation/devicetree/bindings/arm/bcm4708.txt |    8 ++
  MAINTAINERS                                       |    8 ++
  arch/arm/Kconfig.debug                            |    7 ++
  arch/arm/boot/dts/Makefile                        |    1 +
  arch/arm/boot/dts/bcm4708-netgear-r6250.dts       |   35 ++++++++
  arch/arm/boot/dts/bcm4708.dtsi                    |   34 ++++++++
  arch/arm/boot/dts/bcm5301x.dtsi                   |   95 +++++++++++++++++++++
  arch/arm/configs/multi_v7_defconfig               |    1 +
  arch/arm/mach-bcm/Kconfig                         |   26 ++++++
  arch/arm/mach-bcm/Makefile                        |    1 +
  arch/arm/mach-bcm/bcm_5301x.c                     |   61 +++++++++++++
  11 files changed, 277 insertions(+)

create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts create mode 100644 arch/arm/boot/dts/bcm4708.dtsi
create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi
create mode 100644 arch/arm/mach-bcm/bcm_5301x.c

#6 lore raw

v8 cover ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

[Dropped arm at kernel.org as I think it's only intended for pull requests]

Quoted 19 lines · Florian Fainelli

Hi Christian,

Le 03/02/2014 15:01, Hauke Mehrtens a ?crit :

Quoted 16 lines

This adds initial support for Broadcom network SoC from the BCM5301X and BCM470X line.

I do not have any documentation, only the vendor source code published by Asus and Netgear to conform with the GPL, it would be nice to get some documentation for this Soc like this
https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf
for the Broadcom BCM440X Ethernet controller.

With some additional patches I got Ethernet working with ~250 MBit/s.

A bootlog can be found here:
http://hauke-m.de/files/openwrt/devices/R6250/openwrt-boot-2014-01-05.txt

This is based on 3.14-rc1.

Quoted 7 lines
Quoted 1 line

Christian Daudt could you please take these patches.

Christian, have you been able to get a look at those patches? How do you want to proceed for patches affecting bcm5301x in the future? Except for a few cases (Kconfig, Makefile), support for bcm5301x is orthogonal to the other bcm-mobile SoCs, should that be taken care of by the arm-soc maintainers directly?

Based on Olof's suggestion on IRC, we'll want to take these through Christian's tree and just give the arm-soc team a single set of pulls for all platforms sharing mach-bcm/

I'll be helping Christian with this starting for 3.15. However, I'd like his ack to be sure he's happy with this series too. We have Arnd's ack and my comments among others that were addressed so I'm good with it.

-Matt

#7 lore raw

v8 cover ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

In reply to Hauke Mehrtens
Quoted 9 lines · Hauke Mehrtens

This adds initial support for Broadcom network SoC from the BCM5301X and BCM470X line.

I do not have any documentation, only the vendor source code published by Asus and Netgear to conform with the GPL, it would be nice to get some documentation for this Soc like this
https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf
for the Broadcom BCM440X Ethernet controller.

Quoted 8 lines

With some additional patches I got Ethernet working with ~250 MBit/s.

A bootlog can be found here:
http://hauke-m.de/files/openwrt/devices/R6250/openwrt-boot-2014-01-05.txt

This is based on 3.14-rc1.

Christian Daudt could you please take these patches.

Applied for 3.15

Note: our tree is now git://git.github.com/broadcom/mach-bcm

-Matt