perf tools: Update on filtered entries' percentage output (v4)
Namhyung Kim
maintainercover perf tools: Update on filtered entries' percentage output (v4)
Hello,
I added --percentage option to perf report to control display of percentage of filtered entries.
usage: perf report [<options>]
--percentage <relative|absolute>
how to display percentage of filtered entries
"relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains original value before and after the filter applied. In patch 5, I made the "absolute" as default since it makes more sense IMHO.
$ perf report -s comm
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
6.11% as
4.35% sh
4.14% make
1.13% fixdep
... $ perf report -s comm -c cc1,gcc --percentage absolute
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative
# Overhead Command
# ........ ............
#
90.69% cc1
9.31% gccNote that it has zero effect if no filter was applied.
* changes in v4:
- support perf top and perf diff also (Jiri)
- add HIST_FILTER__HOST/GUEST (Jiri)
- retain both of filtered and total stats (Arnaldo)
- add 'F' hotkey on TUI (Jiri)
- rename config variable to have "hist." prefix
You can get this on the 'perf/percentage-v4' branch in my tree
git://git.kernel.org/pub/scm/linux/kernel/git/namhyung/linux-perf.git
Any comments are welcome, thanks
Namhyung
Namhyung Kim (8):
perf tools: Count periods of filtered entries separately perf hists: Add support for showing relative percentage perf report: Add --percentage option
perf top: Add --percentage option
perf diff: Add --percentage option
perf tools: Add hist.percentage config option perf ui/tui: Add 'F' hotkey to toggle percentage output perf tools: Show absolute percentage by default
tools/perf/Documentation/perf-diff.txt | 21 +++++++++-- tools/perf/Documentation/perf-report.txt | 24 +++++++++---- tools/perf/Documentation/perf-top.txt | 18 ++++++++-- tools/perf/builtin-diff.c | 48 +++++++++++++++++++++---- tools/perf/builtin-report.c | 32 +++++++++++++++-- tools/perf/builtin-top.c | 16 +++++++++ tools/perf/ui/browsers/hists.c | 61 ++++++++++++++++++++++++++------ tools/perf/ui/gtk/hists.c | 27 +++++++++----- tools/perf/ui/hist.c | 12 +++++-- tools/perf/util/config.c | 4 +++ tools/perf/util/event.c | 22 ++++++------ tools/perf/util/hist.c | 52 ++++++++++++++++----------- tools/perf/util/hist.h | 15 ++++++++ tools/perf/util/symbol.h | 5 +-- 14 files changed, 278 insertions(+), 79 deletions(-)
Signature · 1 line
1.7.11.7
Namhyung Kim
maintainerPATCH 1/8 perf tools: Count periods of filtered entries separately
Currently if a sample was filtered by command line option, it just dropped. But this affects final output in that the percentage can be different since the filtered entries were not included to the total.
But user might want to see the original percentages when filter applied so add new total_filtered_period filed to hists->stats in order to be controlled by user later. It doesn't change the current behavior yet.
--- tools/perf/builtin-report.c | 2 +- tools/perf/util/event.c | 22 ++++++++++------------ tools/perf/util/hist.c | 10 ++-------- tools/perf/util/hist.h | 10 ++++++++++ tools/perf/util/symbol.h | 2 +- 5 files changed, 24 insertions(+), 22 deletions(-)
tools/perf/builtin-report.c +1 -1
@@ -223,7 +223,7 @@ static int process_sample_event(struct perf_tool *tool,return -1 ; } -if (al.filtered || (rep->hide_unresolved && al.sym ==NULL )) +if (rep->hide_unresolved && al.sym ==NULL )return 0 ;if (rep->cpu_list && !test_bit (sample->cpu, rep->cpu_bitmap))
tools/perf/util/event.c +10 -12
@@ -3,6 +3,7 @@#include "debug.h" #include "machine.h" #include "sort.h" +#include "hist.h" #include "string.h" #include "strlist.h" #include "thread.h"
@@ -661,7 +662,7 @@ void thread__find_addr_map(struct thread *thread, al->thread = thread; al->addr = addr; al->cpumode = cpumode; - al->filtered = false; + al->filtered =0 ;if (machine ==NULL ) { al->map =NULL ;
@@ -687,11 +688,11 @@ void thread__find_addr_map(struct thread *thread,if ((cpumode ==PERF_RECORD_MISC_GUEST_USER || cpumode ==PERF_RECORD_MISC_GUEST_KERNEL ) && !perf_guest) - al->filtered = true; + al->filtered |= (1 <<HIST_FILTER__GUEST );if ((cpumode ==PERF_RECORD_MISC_USER || cpumode ==PERF_RECORD_MISC_KERNEL ) && !perf_host) - al->filtered = true; + al->filtered |= (1 <<HIST_FILTER__HOST );return ; }
@@ -748,9 +749,6 @@ int perf_event__preprocess_sample(const union perf_event *event,if (thread ==NULL )return -1 ; -if (thread__is_filtered (thread)) - goto out_filtered; -dump_printf (" ... thread: %s:%d\n" ,thread__comm_str (thread), thread->tid);/* * Have we already created the kernel maps for this machine?
@@ -765,6 +763,10 @@ int perf_event__preprocess_sample(const union perf_event *event,thread__find_addr_map (thread, machine, cpumode,MAP__FUNCTION , sample->ip, al); + +if (thread__is_filtered (thread)) + al->filtered |= (1 <<HIST_FILTER__THREAD ); +dump_printf (" ...... dso: %s\n" , al->map ? al->map->dso->long_name : al->level =='H' ?"[hypervisor]" :"<not found>" );
@@ -780,7 +782,7 @@ int perf_event__preprocess_sample(const union perf_event *event, (dso->short_name != dso->long_name &&strlist__has_entry (symbol_conf.dso_list, dso->long_name))))) - goto out_filtered; + al->filtered |= (1 << HIST_FILTER__DSO); al->sym =map__find_symbol (al->map, al->addr, machine->symbol_filter);
@@ -789,11 +791,7 @@ int perf_event__preprocess_sample(const union perf_event *event,if (symbol_conf.sym_list && (!al->sym || !strlist__has_entry (symbol_conf.sym_list, al->sym->name))) - goto out_filtered; - -return 0 ; + al->filtered |= (1 <<HIST_FILTER__SYMBOL ); -out_filtered: - al->filtered = true;return 0 ; }
tools/perf/util/hist.c +2 -8
@@ -13,13 +13,6 @@ static bool hists__filter_entry_by_thread(struct hists *hists,static bool hists__filter_entry_by_symbol (struct hists *hists,struct hist_entry *he); -enum hist_filter { -HIST_FILTER__DSO , -HIST_FILTER__THREAD , -HIST_FILTER__PARENT , -HIST_FILTER__SYMBOL , -}; -struct callchain_param callchain_param = { .mode =CHAIN_GRAPH_REL , .min_percent =0.5 ,
@@ -330,6 +323,7 @@ void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h)hists__calc_col_len (hists, h); ++hists->nr_entries; hists->stats.total_period += h->stat.period; + hists->stats.total_filtered_period += h->stat.period; } }
@@ -429,7 +423,7 @@ struct hist_entry *__hists__add_entry(struct hists *hists, .weight = weight, }, .parent = sym_parent, - .filtered = symbol__parent_filter(sym_parent), + .filtered = symbol__parent_filter(sym_parent) | al->filtered, .hists = hists, .branch_info = bi, .mem_info = mi,
tools/perf/util/hist.h +10 -0
@@ -14,6 +14,15 @@ struct hist_entry;struct addr_location ;struct symbol ; +enum hist_filter { +HIST_FILTER__DSO , +HIST_FILTER__THREAD , +HIST_FILTER__PARENT , +HIST_FILTER__SYMBOL , +HIST_FILTER__GUEST , +HIST_FILTER__HOST , +}; +/* * The kernel collects the number of events it couldn't send in a stretch and * when possible sends this number in a PERF_RECORD_LOST event. The number of
@@ -28,6 +37,7 @@ struct symbol;*/ struct events_stats {u64 total_period; +u64 total_filtered_period;u64 total_lost;u64 total_invalid_chains;u32 nr_events[PERF_RECORD_HEADER_MAX ];
tools/perf/util/symbol.h +1 -1
@@ -175,7 +175,7 @@ struct addr_location {struct symbol *sym;u64 addr;char level; -bool filtered; +u8 filtered;u8 cpumode;s32 cpu; };
Signature · 1 line
1.7.11.7
Namhyung Kim
maintainerPATCH 2/8 perf hists: Add support for showing relative percentage
In reply to Namhyung KimWhen filtering by thread, dso or symbol on TUI it also update total period so that the output shows different result than no filter - the percentage changed to relative to filtered entries only. Sometimes this is not desired since users might expect same results with filter.
So new filtered_* fields to hists->stats to count them separately. They'll be controlled/used by user later.
--- tools/perf/util/hist.c | 19 +++++++++++++++---- tools/perf/util/hist.h | 2 ++ 2 files changed, 17 insertions(+), 4 deletions(-)
tools/perf/util/hist.c +15 -4
@@ -675,8 +675,8 @@ void hists__output_resort(struct hists *hists) next =rb_first (root); hists->entries =RB_ROOT ; - hists->nr_entries =0 ; - hists->stats.total_period =0 ; + hists->nr_entries = hists->nr_filtered_entries =0 ; + hists->stats.total_period = hists->stats.total_filtered_period =0 ;hists__reset_col_len (hists);while (next) {
@@ -695,12 +695,17 @@ static void hists__remove_entry_filter(struct hists *hists, struct hist_entry *hif (h->filtered)return ; - ++hists->nr_entries; -if (h->ms.unfolded) + hists->nr_entries++; + hists->nr_filtered_entries++; +if (h->ms.unfolded) { hists->nr_entries += h->nr_rows; + hists->nr_filtered_entries += h->nr_rows; + } h->row_offset =0 ; hists->stats.total_period += h->stat.period; + hists->stats.total_filtered_period += h->stat.period; hists->stats.nr_events[PERF_RECORD_SAMPLE ] += h->stat.nr_events; + hists->stats.nr_filtered_samples += h->stat.nr_events;hists__calc_col_len (hists, h); }
@@ -723,7 +728,9 @@ void hists__filter_by_dso(struct hists *hists)struct rb_node *nd; hists->nr_entries = hists->stats.total_period =0 ; + hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; + hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);for (nd =rb_first (&hists->entries); nd; nd =rb_next (nd)) {
@@ -756,7 +763,9 @@ void hists__filter_by_thread(struct hists *hists)struct rb_node *nd; hists->nr_entries = hists->stats.total_period =0 ; + hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; + hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);for (nd =rb_first (&hists->entries); nd; nd =rb_next (nd)) {
@@ -787,7 +796,9 @@ void hists__filter_by_symbol(struct hists *hists)struct rb_node *nd; hists->nr_entries = hists->stats.total_period =0 ; + hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; + hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);for (nd =rb_first (&hists->entries); nd; nd =rb_next (nd)) {
tools/perf/util/hist.h +2 -0
@@ -41,6 +41,7 @@ struct events_stats {u64 total_lost;u64 total_invalid_chains;u32 nr_events[PERF_RECORD_HEADER_MAX ]; +u32 nr_filtered_samples;u32 nr_lost_warned;u32 nr_unknown_events;u32 nr_invalid_chains;
@@ -84,6 +85,7 @@ struct hists {struct rb_root entries;struct rb_root entries_collapsed;u64 nr_entries; +u64 nr_filtered_entries;const struct thread *thread_filter;const struct dso *dso_filter;const char *uid_filter_str;
Signature · 1 line
1.7.11.7
Namhyung Kim
maintainerPATCH 3/8 perf report: Add --percentage option
In reply to Namhyung KimThe --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied.
$ perf report -s comm
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc
6.11% as
4.35% sh
4.14% make
1.13% fixdep
... $ perf report -s comm -c cc1,gcc --percentage absolute
# Overhead Command
# ........ ............
#
74.19% cc1
7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative
# Overhead Command
# ........ ............
#
90.69% cc1
9.31% gccNote that it has zero effect if no filter was applied.
--- tools/perf/Documentation/perf-report.txt | 24 ++++++++++---- tools/perf/builtin-report.c | 30 +++++++++++++++-- tools/perf/ui/browsers/hists.c | 57 ++++++++++++++++++++++++++------ tools/perf/ui/gtk/hists.c | 27 ++++++++++----- tools/perf/ui/hist.c | 12 +++++-- tools/perf/util/hist.c | 23 ++++--------- tools/perf/util/symbol.c | 1 + tools/perf/util/symbol.h | 3 +- 8 files changed, 129 insertions(+), 48 deletions(-)
tools/perf/Documentation/perf-report.txt +18 -6
@@ -25,10 +25,6 @@ OPTIONS --verbose:: Be more verbose. (show symbol address, etc) --d:: ---dsos=:: - Only consider symbols in these dsos. CSV that understands - file://filename entries. -n:: --show-nr-samples:: Show the number of samples for each symbol
@@ -42,11 +38,18 @@ OPTIONS -c:: --comms=:: Only consider symbols in these comms. CSV that understands - file://filename entries. + file://filename entries. This option will affect the percentage of + the overhead column. See --percentage for more info. +-d:: +--dsos=:: + Only consider symbols in these dsos. CSV that understands + file://filename entries. This option will affect the percentage of + the overhead column. See --percentage for more info. -S:: --symbols=:: Only consider these symbols. CSV that understands - file://filename entries. + file://filename entries. This option will affect the percentage of + the overhead column. See --percentage for more info. --symbol-filter=:: Only show symbols that match (partially) with this filter.
@@ -237,6 +240,15 @@ OPTIONS Do not show entries which have an overhead under that percent. (Default: 0). +--percentage:: + Determine how to display the overhead percentage of filtered entries. + Filters can be applied by --comms, --dsos and/or --symbols options and + Zoom operations on the TUI (thread, dso, etc). + + "relative" means it's relative to filtered entries only so that the + sum of shown entries will be always 100%. "absolute" means it retains + the original value before and after the filter is applied. + --header:: Show header information in the perf.data file. This includes various information like hostname, OS and perf version, cpu/mem
tools/perf/builtin-report.c +28 -2
@@ -329,6 +329,11 @@ static size_t hists__fprintf_nr_sample_events(struct hists *hists, struct reportchar buf[512 ];size_t size =sizeof (buf); +if (symbol_conf.filter_relative) { + nr_samples = hists->stats.nr_filtered_samples; + nr_events = hists->stats.total_filtered_period; + } +if (perf_evsel__is_group_event (evsel)) {struct perf_evsel *pos;
@@ -336,8 +341,13 @@ static size_t hists__fprintf_nr_sample_events(struct hists *hists, struct report evname = buf;for_each_group_member (pos, evsel) { - nr_samples += pos->hists.stats.nr_events[PERF_RECORD_SAMPLE ]; - nr_events += pos->hists.stats.total_period; +if (symbol_conf.filter_relative) { + nr_samples += pos->hists.stats.nr_filtered_samples; + nr_events += pos->hists.stats.total_filtered_period; + }else { + nr_samples += pos->hists.stats.nr_events[PERF_RECORD_SAMPLE ]; + nr_events += pos->hists.stats.total_period; + } } }
@@ -693,6 +703,20 @@ parse_percent_limit(const struct option *opt, const char *str,return 0 ; } +static int +parse_percentage (const struct option *opt__maybe_unused ,const char *str, +int unset__maybe_unused ) +{ +if (!strcmp (str,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (str,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + +return 0 ; +} +int cmd_report (int argc,const char **argv,const char *prefix__maybe_unused ) {struct perf_session *session;
@@ -815,6 +839,8 @@ int cmd_report(int argc, const char **argv, const char *prefix __maybe_unused)OPT_BOOLEAN (0 ,"mem-mode" , &report.mem_mode,"mem access profile" ),OPT_CALLBACK (0 ,"percent-limit" , &report,"percent" ,"Don't show entries under that percent" , parse_percent_limit), +OPT_CALLBACK (0 ,"percentage" ,NULL ,"relative|absolute" , +"how to display percentage of filtered entries" , parse_percentage),OPT_END () }; struct perf_data_file file = {
tools/perf/ui/browsers/hists.c +46 -11
104 lines not on this page · raw message
tools/perf/ui/gtk/hists.c +18 -9
@@ -33,9 +33,13 @@ static int __hpp__color_fmt(struct perf_hpp *hpp, struct hist_entry *he,double percent =0.0 ;struct hists *hists = he->hists;struct perf_evsel *evsel =hists_to_evsel (hists); +u64 total = hists->stats.total_period; -if (hists->stats.total_period) - percent =100.0 *get_field (he) / hists->stats.total_period; +if (symbol_conf.filter_relative) + total = hists->stats.total_filtered_period; + +if (total) + percent =100.0 *get_field (he) / total; ret =__percent_color_snprintf (hpp->buf, hpp->size, percent);
@@ -48,7 +52,10 @@ static int __hpp__color_fmt(struct perf_hpp *hpp, struct hist_entry *he,list_for_each_entry (pair, &he->pairs.head, pairs.node) {u64 period =get_field (pair); -u64 total = pair->hists->stats.total_period; + + total = pair->hists->stats.total_period; +if (symbol_conf.filter_relative) + total = pair->hists->stats.total_filtered_period; evsel =hists_to_evsel (pair->hists); idx_delta =perf_evsel__group_idx (evsel) - prev_idx -1 ;
@@ -280,12 +287,18 @@ static void perf_gtk__show_hists(GtkWidget *window, struct hists *hists,for (nd =rb_first (&hists->entries); nd; nd =rb_next (nd)) { struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);GtkTreeIter iter; -float percent = h->stat.period *100.0 / - hists->stats.total_period; +u64 total = h->hists->stats.total_period; +float percent =0.0 ;if (h->filtered)continue ; +if (symbol_conf.filter_relative) + total = h->hists->stats.total_filtered_period; + +if (total) + percent = h->stat.period *100.0 / total; +if (percent < min_pcnt)continue ;
@@ -313,12 +326,8 @@ static void perf_gtk__show_hists(GtkWidget *window, struct hists *hists, }if (symbol_conf.use_callchain && sort__has_sym) { -u64 total; -if (callchain_param.mode ==CHAIN_GRAPH_REL ) total = h->stat.period; -else - total = hists->stats.total_period;perf_gtk__add_callchain (&h->sorted_chain, store, &iter, sym_col, total);
tools/perf/ui/hist.c +9 -3
@@ -21,10 +21,13 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,if (fmt_percent) {double percent =0.0 ; +u64 total = hists->stats.total_period; -if (hists->stats.total_period) - percent =100.0 *get_field (he) / - hists->stats.total_period; +if (symbol_conf.filter_relative) + total = hists->stats.total_filtered_period; + +if (total) + percent =100.0 *get_field (he) / total; ret =print_fn (hpp->buf, hpp->size, fmt, percent); }else
@@ -41,6 +44,9 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,u64 period =get_field (pair);u64 total = pair->hists->stats.total_period; +if (symbol_conf.filter_relative) + total = pair->hists->stats.total_filtered_period; +if (!total)continue ;
tools/perf/util/hist.c +7 -16
@@ -321,10 +321,11 @@ void hists__inc_nr_entries(struct hists *hists, struct hist_entry *h) {if (!h->filtered) {hists__calc_col_len (hists, h); - ++hists->nr_entries; - hists->stats.total_period += h->stat.period; + hists->nr_filtered_entries++; hists->stats.total_filtered_period += h->stat.period; } + hists->nr_entries++; + hists->stats.total_period += h->stat.period; }static u8 symbol__parent_filter (const struct symbol *parent)
@@ -675,8 +676,9 @@ void hists__output_resort(struct hists *hists) next =rb_first (root); hists->entries =RB_ROOT ; - hists->nr_entries = hists->nr_filtered_entries =0 ; - hists->stats.total_period = hists->stats.total_filtered_period =0 ; + hists->nr_filtered_entries =0 ; + hists->stats.total_period =0 ; + hists->stats.total_filtered_period =0 ;hists__reset_col_len (hists);while (next) {
@@ -695,16 +697,11 @@ static void hists__remove_entry_filter(struct hists *hists, struct hist_entry *hif (h->filtered)return ; - hists->nr_entries++; hists->nr_filtered_entries++; -if (h->ms.unfolded) { - hists->nr_entries += h->nr_rows; +if (h->ms.unfolded) hists->nr_filtered_entries += h->nr_rows; - } h->row_offset =0 ; - hists->stats.total_period += h->stat.period; hists->stats.total_filtered_period += h->stat.period; - hists->stats.nr_events[PERF_RECORD_SAMPLE ] += h->stat.nr_events; hists->stats.nr_filtered_samples += h->stat.nr_events;hists__calc_col_len (hists, h);
@@ -727,9 +724,7 @@ void hists__filter_by_dso(struct hists *hists) {struct rb_node *nd; - hists->nr_entries = hists->stats.total_period =0 ; hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; - hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);
@@ -762,9 +757,7 @@ void hists__filter_by_thread(struct hists *hists) {struct rb_node *nd; - hists->nr_entries = hists->stats.total_period =0 ; hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; - hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);
@@ -795,9 +788,7 @@ void hists__filter_by_symbol(struct hists *hists) {struct rb_node *nd; - hists->nr_entries = hists->stats.total_period =0 ; hists->nr_filtered_entries = hists->stats.total_filtered_period =0 ; - hists->stats.nr_events[PERF_RECORD_SAMPLE ] =0 ; hists->stats.nr_filtered_samples =0 ;hists__reset_col_len (hists);
tools/perf/util/symbol.c +1 -0
@@ -33,6 +33,7 @@ struct symbol_conf symbol_conf = { .try_vmlinux_path = true, .annotate_src = true, .demangle = true, + .filter_relative = true, .symfs = "", };
tools/perf/util/symbol.h +2 -1
@@ -104,7 +104,8 @@ struct symbol_conf { annotate_asm_raw, annotate_src, event_group, - demangle; + demangle, + filter_relative;const char *vmlinux_name, *kallsyms_name, *source_prefix,
Signature · 1 line
1.7.11.7
Re: [PATCH 3/8] perf report: Add --percentage option
Quoted 6 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied.
SNIP
Quoted 22 lines
tools/perf/ui/hist.c +6
-3@@ -21,10 +21,13 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,if (fmt_percent) {double percent =0.0 ; +u64 total = hists->stats.total_period; -if (hists->stats.total_period) - percent =100.0 *get_field (he) / - hists->stats.total_period; +if (symbol_conf.filter_relative) + total = hists->stats.total_filtered_period; + +if (total) + percent =100.0 *get_field (he) / total; ret =print_fn (hpp->buf, hpp->size, fmt, percent); }else
tools/perf/ui/hist.c static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he, · line 51
Quoted 8 lines
tools/perf/ui/hist.c +3
-0@@ -41,6 +44,9 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,u64 period =get_field (pair);u64 total = pair->hists->stats.total_period; +if (symbol_conf.filter_relative) + total = pair->hists->stats.total_filtered_period; +if (!total)continue ;
looks like we could use something like:
perf_hists__total_period(hists)
{
u64 total = hists->stats.total_period;
if (symbol_conf.filter_relative)
total = hists->stats.total_filtered_period;
return total;
}probably on other places as well
jirka
Namhyung Kim
maintainerRe: [PATCH 3/8] perf report: Add --percentage option
Hi Jiri,
Quoted 53 lines · Jiri Olsa
Quoted 6 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
"relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied.
SNIP
Quoted 22 lines
tools/perf/ui/hist.c +6
-3@@ -21,10 +21,13 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,if (fmt_percent) {double percent =0.0 ; +u64 total = hists->stats.total_period; -if (hists->stats.total_period) - percent =100.0 *get_field (he) / - hists->stats.total_period; +if (symbol_conf.filter_relative) + total = hists->stats.total_filtered_period; + +if (total) + percent =100.0 *get_field (he) / total; ret =print_fn (hpp->buf, hpp->size, fmt, percent); }else tools/perf/ui/hist.c static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he, · line 51
Quoted 8 lines
tools/perf/ui/hist.c +3
-0@@ -41,6 +44,9 @@ static int __hpp__fmt(struct perf_hpp *hpp, struct hist_entry *he,u64 period =get_field (pair);u64 total = pair->hists->stats.total_period; +if (symbol_conf.filter_relative) + total = pair->hists->stats.total_filtered_period; +if (!total)continue ;looks like we could use something like:
perf_hists__total_period(hists){ u64 total = hists->stats.total_period; if (symbol_conf.filter_relative) total = hists->stats.total_filtered_period; return total; }
Quoted 1 line
probably on other places as well
Right! Will change.
Thanks,
Namhyung
Namhyung Kim
maintainerPATCH 4/8 perf top: Add --percentage option
In reply to Namhyung KimThe --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
For more information, please see previous commit same thing done to "perf report".
--- tools/perf/Documentation/perf-top.txt | 18 +++++++++++++++--- tools/perf/builtin-top.c | 16 ++++++++++++++++ 2 files changed, 31 insertions(+), 3 deletions(-)
tools/perf/Documentation/perf-top.txt +15 -3
@@ -124,13 +124,16 @@ Default is to monitor all CPUS. Show a column with the sum of periods. --dsos:: - Only consider symbols in these dsos. + Only consider symbols in these dsos. This option will affect the + percentage of the overhead column. See --percentage for more info. --comms:: - Only consider symbols in these comms. + Only consider symbols in these comms. This option will affect the + percentage of the overhead column. See --percentage for more info. --symbols:: - Only consider these symbols. + Only consider these symbols. This option will affect the + percentage of the overhead column. See --percentage for more info. -M:: --disassembler-style=:: Set disassembler style for objdump.
@@ -166,6 +169,15 @@ Default is to monitor all CPUS. Do not show entries which have an overhead under that percent. (Default: 0). +--percentage:: + Determine how to display the overhead percentage of filtered entries. + Filters can be applied by --comms, --dsos and/or --symbols options and + Zoom operations on the TUI (thread, dso, etc). + + "relative" means it's relative to filtered entries only so that the + sum of shown entries will be always 100%. "absolute" means it retains + the original value before and after the filter is applied. + INTERACTIVE PROMPTING KEYS --------------------------
tools/perf/builtin-top.c +16 -0
@@ -1011,6 +1011,20 @@ parse_percent_limit(const struct option *opt, const char *arg,return 0 ; } +static int +parse_percentage (const struct option *opt__maybe_unused ,const char *arg, +int unset__maybe_unused ) +{ +if (!strcmp (arg,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (arg,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + +return 0 ; +} +int cmd_top (int argc,const char **argv,const char *prefix__maybe_unused ) {int status =-1 ;
@@ -1114,6 +1128,8 @@ int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused)OPT_STRING ('u' ,"uid" , &target->uid_str,"user" ,"user to profile" ),OPT_CALLBACK (0 ,"percent-limit" , &top,"percent" ,"Don't show entries under that percent" , parse_percent_limit), +OPT_CALLBACK (0 ,"percentage" ,NULL ,"relative|absolute" , +"How to display percentage of filtered entries" , parse_percentage),OPT_END () }; const char * const top_usage[] = {
Signature · 1 line
1.7.11.7
Re: [PATCH 4/8] perf top: Add --percentage option
Quoted 8 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
For more information, please see previous commit same thing done to "perf report".
Signed-off-by Namhyung Kim <[email protected]>---
SNIP
Quoted 12 lines
tools/perf/builtin-top.c +3
-0@@ -1011,6 +1011,20 @@ parse_percent_limit(const struct option *opt, const char *arg,return 0 ; } +static int +parse_percentage (const struct option *opt__maybe_unused ,const char *arg, +int unset__maybe_unused )
tools/perf/builtin-top.c parse_percent_limit(const struct option *opt, const char *arg, · line 1026
Quoted 10 lines
tools/perf/builtin-top.c +10
-0+{ +if (!strcmp (arg,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (arg,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + +return 0 ; +}
please make one of parse_percentage functions public and share it among report/top/diff commands
jirka
Namhyung Kim
maintainerRe: [PATCH 4/8] perf top: Add --percentage option
Quoted 21 lines · Jiri Olsa
Quoted 8 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute".
For more information, please see previous commit same thing done to "perf report".
Signed-off-by Namhyung Kim <[email protected]>---
SNIP
Quoted 9 lines
tools/perf/builtin-top.c +0
-0@@ -1011,6 +1011,20 @@ parse_percent_limit(const struct option *opt, const char *arg,return 0 ; }
Quoted 16 lines
tools/perf/builtin-top.c parse_percent_limit(const struct option *opt, const char *arg, · line 1026
Quoted 13 lines
tools/perf/builtin-top.c +13
-0+static int +parse_percentage (const struct option *opt__maybe_unused ,const char *arg, +int unset__maybe_unused ) +{ +if (!strcmp (arg,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (arg,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + +return 0 ; +}please make one of
parse_percentagefunctions public and share it among report/top/diff commands
Okay.
Thanks,
Namhyung
Namhyung Kim
maintainerPATCH 5/8 perf diff: Add --percentage option
In reply to Namhyung KimThe --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only.
For more information, please see previous commit same thing done to "perf report".
--- tools/perf/Documentation/perf-diff.txt | 21 +++++++++++++--- tools/perf/builtin-diff.c | 46 +++++++++++++++++++++++++++++----- 2 files changed, 58 insertions(+), 9 deletions(-)
tools/perf/Documentation/perf-diff.txt +18 -3
@@ -33,17 +33,20 @@ OPTIONS -d:: --dsos=:: Only consider symbols in these dsos. CSV that understands - file://filename entries. + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. -C:: --comms=:: Only consider symbols in these comms. CSV that understands - file://filename entries. + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. -S:: --symbols=:: Only consider these symbols. CSV that understands - file://filename entries. + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. -s:: --sort=::
@@ -89,6 +92,14 @@ OPTIONS --order:: Specify compute sorting column number. +--percentage:: + Determine how to display the overhead percentage of filtered entries. + Filters can be applied by --comms, --dsos and/or --symbols options. + + "relative" means it's relative to filtered entries only so that the + sum of shown entries will be always 100%. "absolute" means it retains + the original value before and after the filter is applied. + COMPARISON ---------- The comparison is governed by the baseline file. The baseline perf.data
@@ -157,6 +168,10 @@ with: - period_percent being the % of the hist entry period value within single data file + - with filtering by -C, -d and/or -S, period_percent might be changed + relative to how entries are filtered. Use --percentage=absolute to + prevent such fluctuation. + ratio ~~~~~ If specified the 'Ratio' column is displayed with value 'r' computed as:
tools/perf/builtin-diff.c +40 -6
98 lines not on this page · raw message
Signature · 1 line
1.7.11.7
Re: [PATCH 5/8] perf diff: Add --percentage option
Quoted 10 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only.
For more information, please see previous commit same thing done to "perf report".
Cc Jiri Olsa <[email protected]>Signed-off-by Namhyung Kim <[email protected]>---
SNIP
Quoted 7 lines
~~~~~
If specified the 'Ratio' column is displayed with value 'r' computed as:tools/perf/builtin-diff.c +0
-0
tools/perf/builtin-diff.c static int setup_compute(const struct option *opt, const char *str, · line 228
Quoted 8 lines
tools/perf/builtin-diff.c +4
-0@@ -221,6 +221,10 @@ static int setup_compute(const struct option *opt, const char *str,static double period_percent (struct hist_entry *he,u64 period) {u64 total = he->hists->stats.total_period; + +if (symbol_conf.filter_relative) + total = he->hists->stats.total_filtered_period; +return (period *100.0 ) / total;
yet another perf_hists__total_period user
Quoted 8 lines
tools/perf/builtin-diff.c +2
-0}@@ -259,11 +263,18 @@ static s64 compute_wdiff(struct hist_entry *he, struct hist_entry *pair)static int formula_delta (struct hist_entry *he,struct hist_entry *pair,char *buf,size_t size) { +u64 he_total = he->hists->stats.total_period; +u64 pair_total = pair->hists->stats.total_period;
SNIP
tools/perf/builtin-diff.c static const struct option options[] = { · line 776
Quoted 12 lines
static double
baseline_percent(struct hist_entry *he){tools/perf/builtin-diff.c +6
-1struct hists *hists = he->hists; -return 100.0 * he->stat.period / hists->stats.total_period; +u64 total = hists->stats.total_period; + +if (symbol_conf.filter_relative) + total = hists->stats.total_filtered_period; + +return 100.0 * he->stat.period / total; }
and another ;-)
jirka
Re: [PATCH 5/8] perf diff: Add --percentage option
In reply to Namhyung KimQuoted 13 lines · Namhyung Kim
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only.
For more information, please see previous commit same thing done to "perf report".
Cc Jiri Olsa <[email protected]>Signed-off-by Namhyung Kim <[email protected]>--- tools/perf/Documentation/perf-diff.txt | 21 +++++++++++++--- tools/perf/builtin-diff.c | 46 +++++++++++++++++++++++++++++----- 2 files changed, 58 insertions(+), 9 deletions(-)
SNIP
tools/perf/builtin-diff.c static s64 compute_wdiff(struct hist_entry *he, struct hist_entry *pair) · line 272
Quoted 11 lines
tools/perf/builtin-diff.c +7
-0@@ -259,11 +263,18 @@ static s64 compute_wdiff(struct hist_entry *he, struct hist_entry *pair)static int formula_delta (struct hist_entry *he,struct hist_entry *pair,char *buf,size_t size) { +u64 he_total = he->hists->stats.total_period; +u64 pair_total = pair->hists->stats.total_period; + +if (symbol_conf.filter_relative) { + he_total = he->hists->stats.total_filtered_period; + pair_total = pair->hists->stats.total_filtered_period; + }
and another ;-)
jirka
Namhyung Kim
maintainerPATCH 7/7 perf tools: Show absolute percentage by default
In reply to Namhyung KimNow perf report will show absolute percentage on filter entries by default.
--- tools/perf/util/symbol.c | 1 - 1 file changed, 1 deletion(-)
tools/perf/util/symbol.c +0 -1
@@ -33,7 +33,6 @@ struct symbol_conf symbol_conf = { .try_vmlinux_path = true, .annotate_src = true, .demangle = true, - .filter_relative = true, .symfs = "", };
Signature · 1 line
1.7.11.7
Re: [PATCH 7/7] perf tools: Show absolute percentage by default
Oops, please ignore this. This was a leftover from last change.. sorry :( (actually, it's same as patch 8/8).
Thanks,
Namhyung
2014-02-10 오전 11:47, Namhyung Kim 쓴 글:
Quoted 22 lines
Now perf report will show absolute percentage on filter entries by default.
Suggested-by Jiri Olsa <[email protected]>Signed-off-by Namhyung Kim <[email protected]>--- tools/perf/util/symbol.c | 1 - 1 file changed, 1 deletion(-)tools/perf/util/symbol.c +0
-1@@ -33,7 +33,6 @@ struct symbol_conf symbol_conf = { .try_vmlinux_path = true, .annotate_src = true, .demangle = true, - .filter_relative = true, .symfs = "", };
Namhyung Kim
maintainerPATCH 6/8 perf tools: Add hist.percentage config option
In reply to Namhyung KimAdd hist.percentage option for setting default value of the symbol_conf.filter_relative. It affects the output of various perf commands (like perf report, top and diff) only if filter(s) applied.
An user can write .perfconfig file like below to show absolute percentage of filtered entries by default:
$ cat ~/.perfconfig [hist] percentage = absolute
And it can be changed through command line:
$ perf report --percentage relative
--- tools/perf/builtin-diff.c | 2 ++ tools/perf/util/config.c | 4 ++++ tools/perf/util/hist.c | 14 ++++++++++++++ tools/perf/util/hist.h | 3 +++ 4 files changed, 23 insertions(+)
tools/perf/builtin-diff.c +2 -0
@@ -1153,6 +1153,8 @@ static int data_init(int argc, const char **argv)int cmd_diff (int argc,const char **argv,const char *prefix__maybe_unused ) { +perf_config (perf_default_config,NULL ); + sort_order = diff__default_sort_order; argc =parse_options (argc, argv, options, diff_usage,0 );
tools/perf/util/config.c +4 -0
@@ -11,6 +11,7 @@#include "util.h" #include "cache.h" #include "exec_cmd.h" +#include "util/hist.h" /* perf_hist_config */ #define MAXNAME (256)
@@ -355,6 +356,9 @@ int perf_default_config(const char *var, const char *value,if (!prefixcmp (var,"core." ))return perf_default_core_config (var, value); +if (!prefixcmp (var,"hist." )) +return perf_hist_config (var, value); +/* Add other config variables here. */ return 0 ; }
tools/perf/util/hist.c +14 -0
@@ -934,3 +934,17 @@ int hists__link(struct hists *leader, struct hists *other)return 0 ; } + +int perf_hist_config (const char *var,const char *value) +{ +if (!strcmp (var,"hist.percentage" )) { +if (!strcmp (value,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (value,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + } + +return 0 ; +}
tools/perf/util/hist.h +3 -0
@@ -237,4 +237,7 @@ static inline int script_browse(const char *script_opt __maybe_unused)#endif unsigned int hists__sort_list_width (struct hists *hists); + +int perf_hist_config (const char *var,const char *value); +#endif /* __PERF_HIST_H */
Signature · 1 line
1.7.11.7
Re: [PATCH 6/8] perf tools: Add hist.percentage config option
Quoted 6 lines · Namhyung Kim
Add hist.percentage option for setting default value of the symbol_conf.filter_relative. It affects the output of various perf commands (like perf report, top and diff) only if filter(s) applied.
An user can write .perfconfig file like below to show absolute percentage of filtered entries by default:
SNIP
Quoted 9 lines
+++
b/tools/perf/util/hist.ctools/perf/util/hist.c +4
-0@@ -934,3 +934,17 @@ int hists__link(struct hists *leader, struct hists *other)return 0 ; } + +int perf_hist_config (const char *var,const char *value) +{ +if (!strcmp (var,"hist.percentage" )) {
tools/perf/util/hist.c int hists__link(struct hists *leader, struct hists *other) · line 950
Quoted 10 lines
tools/perf/util/hist.c +10
-0+if (!strcmp (value,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (value,"absolute" )) + symbol_conf.filter_relative = false; +else +return -1 ; + } + +return 0 ; +}
the inner stuff could be done in parse_percentage function not to duplicate the symbol_conf.filter_relative assignment
jirka
Namhyung Kim
maintainerRe: [PATCH 6/8] perf tools: Add hist.percentage config option
Quoted 24 lines · Jiri Olsa
Quoted 6 lines · Namhyung Kim
Add hist.percentage option for setting default value of the symbol_conf.filter_relative. It affects the output of various perf commands (like perf report, top and diff) only if filter(s) applied.
An user can write .perfconfig file like below to show absolute percentage of filtered entries by default:
SNIP
Quoted 14 lines
+++
b/tools/perf/util/hist.ctools/perf/util/hist.c +9
-0@@ -934,3 +934,17 @@ int hists__link(struct hists *leader, struct hists *other)return 0 ; } + +int perf_hist_config (const char *var,const char *value) +{ +if (!strcmp (var,"hist.percentage" )) { +if (!strcmp (value,"relative" )) + symbol_conf.filter_relative = true; +else if (!strcmp (value,"absolute" )) + symbol_conf.filter_relative = false; +else
Quoted 8 lines
tools/perf/util/hist.c int hists__link(struct hists *leader, struct hists *other) · line 950
Quoted 5 lines
tools/perf/util/hist.c +5
-0+return -1 ; + } + +return 0 ; +}the inner stuff could be done in
parse_percentagefunction not to duplicate the symbol_conf.filter_relative assignment
Will do!
Thanks,
Namhyung
Namhyung Kim
maintainerPATCH 7/8 perf ui/tui: Add 'F' hotkey to toggle percentage output
In reply to Namhyung KimAdd 'F' hotkey to toggle relative and absolute percentage of filtered entries.
--- tools/perf/ui/browsers/hists.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/perf/ui/browsers/hists.c +4 -0
@@ -1447,6 +1447,7 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,"C Collapse all callchains\n" \"d Zoom into current DSO\n" \"E Expand all callchains\n" \ +"F Toggle percentage of filtered entries\n" \/* help messages are sorted by lexical order of the hotkey */ const char report_help[] = HIST_BROWSER_HELP_COMMON
@@ -1552,6 +1553,9 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,if (env->arch)tui__header_window (env);continue ; +case 'F' : + symbol_conf.filter_relative ^=1 ; +continue ;case K_F1 :case 'h' :case '?' :
Signature · 1 line
1.7.11.7
Re: [PATCH 7/8] perf ui/tui: Add 'F' hotkey to toggle percentage output
Quoted 34 lines · Namhyung Kim
Add 'F' hotkey to toggle relative and absolute percentage of filtered entries.
Suggested-by Jiri Olsa <[email protected]>Signed-off-by Namhyung Kim <[email protected]>--- tools/perf/ui/browsers/hists.c | 4 ++++ 1 file changed, 4 insertions(+)tools/perf/ui/browsers/hists.c +4
-0@@ -1447,6 +1447,7 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,"C Collapse all callchains\n" \"d Zoom into current DSO\n" \"E Expand all callchains\n" \ +"F Toggle percentage of filtered entries\n" \/* help messages are sorted by lexical order of the hotkey */ const char report_help[] = HIST_BROWSER_HELP_COMMON@@ -1552,6 +1553,9 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,if (env->arch)tui__header_window (env);continue ; +case 'F' : + symbol_conf.filter_relative ^=1 ; +continue ;case K_F1 :case 'h' :case '?' :Signature · 1 line
1.7.11.7
when in relative mode i get 0 samples count
also in --stdio:
[jolsa@krava perf]$ ./perf report -s symbol --symbols=system_call,vfs_write --stdio --percentage=relative Failed to open /tmp/perf-1063.map, continuing without symbols
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 0 of event 'cycles'
# Event count (approx.): 6046797
#
# Overhead Symbol
# ........ ...............
#
57.05% [k] system_call
42.95% [k] vfs_write jirka
Namhyung Kim
maintainerRe: [PATCH 7/8] perf ui/tui: Add 'F' hotkey to toggle percentage output
Quoted 47 lines · Jiri Olsa
Quoted 34 lines · Namhyung Kim
Add 'F' hotkey to toggle relative and absolute percentage of filtered entries.
Suggested-by Jiri Olsa <[email protected]>Signed-off-by Namhyung Kim <[email protected]>--- tools/perf/ui/browsers/hists.c | 4 ++++ 1 file changed, 4 insertions(+)tools/perf/ui/browsers/hists.c +4
-0@@ -1447,6 +1447,7 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,"C Collapse all callchains\n" \"d Zoom into current DSO\n" \"E Expand all callchains\n" \ +"F Toggle percentage of filtered entries\n" \/* help messages are sorted by lexical order of the hotkey */ const char report_help[] = HIST_BROWSER_HELP_COMMON@@ -1552,6 +1553,9 @@ static int perf_evsel__hists_browse(struct perf_evsel *evsel, int nr_events,if (env->arch)tui__header_window (env);continue ; +case 'F' : + symbol_conf.filter_relative ^=1 ; +continue ;case K_F1 :case 'h' :case '?' :Signature · 1 line
1.7.11.7when in relative mode i get 0 samples count
also in --stdio:[jolsa@krava perf]$ ./perf report -s symbol --symbols=system_call,vfs_write --stdio --percentage=relative Failed to open
/tmp/perf-1063.map, continuing without symbols
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 0 of event 'cycles'
# Event count (approx.): 6046797
#
# Overhead Symbol
Quoted 4 lines
# ........ ...............
#
57.05% [k] system_call
42.95% [k] vfs_write Oops, I found that I missed to increase it when adding hist entries.. will fix.
Thanks,
Namhyung
Namhyung Kim
maintainerPATCH 8/8 perf tools: Show absolute percentage by default
In reply to Namhyung KimNow perf report will show absolute percentage on filter entries by default.
--- tools/perf/util/symbol.c | 1 - 1 file changed, 1 deletion(-)
tools/perf/util/symbol.c +0 -1
@@ -33,7 +33,6 @@ struct symbol_conf symbol_conf = { .try_vmlinux_path = true, .annotate_src = true, .demangle = true, - .filter_relative = true, .symfs = "", };
Signature · 1 line
1.7.11.7
Namhyung Kim
maintainerPing!
Quoted 84 lines · Namhyung Kim
Hello,
I added --percentage option to perf report to control display of percentage of filtered entries.
usage: perf report [<options>]
--percentage <relative|absolute>
how to display percentage of filtered entries"relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains original value before and after the filter applied. In patch 5, I made the "absolute" as default since it makes more sense IMHO.
$ perf report -s comm # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc 6.11% as 4.35% sh 4.14% make 1.13% fixdep ...$ perf report -s comm -c cc1,gcc --percentage absolute # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc$ perf report -s comm -c cc1,gcc --percentage relative # Overhead Command # ........ ............ # 90.69% cc1 9.31% gccNote that it has zero effect if no filter was applied.
* changes in v4:
- support perf top and perf diff also (Jiri)
- add HIST_FILTER__HOST/GUEST (Jiri)
- retain both of filtered and total stats (Arnaldo)
- add 'F' hotkey on TUI (Jiri)
- rename config variable to have "hist." prefixYou can get this on the 'perf/percentage-v4' branch in my tree
git://git.kernel.org/pub/scm/linux/kernel/git/namhyung/linux-perf.gitAny comments are welcome, thanks
NamhyungNamhyung Kim (8):
perf tools: Count periods of filtered entries separately perf hists: Add support for showing relative percentage perf report: Add --percentage option
perf top: Add --percentage option
perf diff: Add --percentage option
perf tools: Add hist.percentage config option perf ui/tui: Add 'F' hotkey to toggle percentage output perf tools: Show absolute percentage by defaulttools/perf/Documentation/perf-diff.txt | 21 +++++++++-- tools/perf/Documentation/perf-report.txt | 24 +++++++++---- tools/perf/Documentation/perf-top.txt | 18 ++++++++-- tools/perf/builtin-diff.c | 48 +++++++++++++++++++++---- tools/perf/builtin-report.c | 32 +++++++++++++++-- tools/perf/builtin-top.c | 16 +++++++++ tools/perf/ui/browsers/hists.c | 61 ++++++++++++++++++++++++++------ tools/perf/ui/gtk/hists.c | 27 +++++++++----- tools/perf/ui/hist.c | 12 +++++-- tools/perf/util/config.c | 4 +++ tools/perf/util/event.c | 22 ++++++------ tools/perf/util/hist.c | 52 ++++++++++++++++----------- tools/perf/util/hist.h | 15 ++++++++ tools/perf/util/symbol.h | 5 +-- 14 files changed, 278 insertions(+), 79 deletions(-)