Skip to contentSkip to conversation

sensors.conf.default: Add default voltage settings for nct6791

PATCH In review Jean Delvare 2 participants 3 messages Feb 20, 2014 – Feb 21, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sensors.conf.default: Add default voltage settings for nct6791

Guenter, do I get it right that the NCT6791 has the same voltage input constraints as the NCT6775 and NCT6776?

Are there other Nuvoton chips that should be added to the list?

sensors.conf.default +1 -1
Index: etc/sensors.conf.default
===================================================================
@@ -308,7 +308,7 @@
 #    set in8_max  3.0 * 1.10
 
 
-chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
+chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" "nct6791-*"
 
     label in0 "Vcore"
     label in2 "AVCC"
Signature · 7 lines
Jean Delvare
Suse L3 Support

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#1 lore raw
Quoted 3 lines · Jean Delvare

Guenter, do I get it right that the NCT6791 has the same voltage input constraints as the NCT6775 and NCT6776?

Hi Jean,

Yes, this is correct.

Quoted 2 lines

Are there other Nuvoton chips that should be added to the list?

NCT6779.

Note that NCT6791 and NCT6779 have 15 voltage monitoring registers.

Guenter

Quoted 7 lines

Index: etc/sensors.conf.default
===================================================================

sensors.conf.default line 314

Quoted 8 lines
sensors.conf.default +1 -1
@@ -308,7 +308,7 @@
  #    set in8_max  3.0 * 1.10
 
 
-chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"
+chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" "nct6791-*"
 
      label in0 "Vcore"
      label in2 "AVCC"

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#2 lore raw
In reply to Jean Delvare
Quoted 9 lines · Guenter Roeck
Quoted 2 lines · Jean Delvare

Guenter, do I get it right that the NCT6791 has the same voltage input constraints as the NCT6775 and NCT6776?

Yes, this is correct.

Quoted 1 line

Are there other Nuvoton chips that should be added to the list?

NCT6779.

OK, I added both to sensors.conf.default.

Signature · 7 lines
Jean Delvare
Suse L3 Support

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors