ARM: dts: omap3-igep: fix boot fail due wrong compatible match
PATCH 1/1 ARM: dts: omap3-igep: fix boot fail due wrong compatible match
This patch is based on commit:
016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")
and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630.
---
Tony and Benoit,
Sorry for posting this patch this late on the -rc cycle but I just didn't have time before to test IGEP boards against 3.14.
I hope this fix can still make it to 3.14 since is a very big issue (board not even booting).
Thanks a lot and best regards,
Javier
arch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/omap3-igep0020.dts +1 -1
@@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";
arch/arm/boot/dts/omap3-igep0030.dts +1 -1
@@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";
Signature · 1 line
1.8.5.3
PATCH 1/1 ARM: dts: omap3-igep: fix boot fail due wrong compatible match
Hi Tony,
Quoted 52 lines · Javier Martinez Canillas
This patch is based on commit:
016c12d2("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630.
Signed-off-by Javier Martinez Canillas <[email protected]>---
Tony and Benoit,
Sorry for posting this patch this late on the -rc cycle but I just didn't have time before to test IGEP boards against 3.14.
I hope this fix can still make it to 3.14 since is a very big issue (board not even booting).
Thanks a lot and best regards,
Javierarch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/omap3-igep0020.dts +1
-1@@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";arch/arm/boot/dts/omap3-igep0030.dts +1
-2@@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; --
Quoted 2 lines
1.8.5.3
I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.
Are you planning to send more fixes for 3.14?
Thanks a lot and best regards,
Javier
PATCH 1/1 ARM: dts: omap3-igep: fix boot fail due wrong compatible match
Quoted 61 lines · Javier Martinez Canillas
Hi Tony,
Quoted 52 lines · Javier Martinez Canillas
This patch is based on commit:
016c12d2("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630.
Signed-off-by Javier Martinez Canillas <[email protected]>---
Tony and Benoit,
Sorry for posting this patch this late on the -rc cycle but I just didn't have time before to test IGEP boards against 3.14.
I hope this fix can still make it to 3.14 since is a very big issue (board not even booting).
Thanks a lot and best regards,
Javierarch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/omap3-igep0020.dts +1
-1@@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";arch/arm/boot/dts/omap3-igep0030.dts +1
-2@@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; --Quoted 2 lines
1.8.5.3
I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.
Quoted 1 line
Are you planning to send more fixes for 3.14?
Yes hoping to send one more set, got this one tagged for it.
Regards,
Tony
PATCH 1/1 ARM: dts: omap3-igep: fix boot fail due wrong compatible match
Hi Tony,
Quoted 62 lines · Tony Lindgren
Quoted 61 lines · Javier Martinez Canillas
Hi Tony,
Quoted 52 lines · Javier Martinez Canillas
This patch is based on commit:
016c12d2("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")and fixes a boot hang due the IGEP board being wrongly initialized as an OMAP3430 platform instead of an OMAP3630.
Signed-off-by Javier Martinez Canillas <[email protected]>---
Tony and Benoit,
Sorry for posting this patch this late on the -rc cycle but I just didn't have time before to test IGEP boards against 3.14.
I hope this fix can still make it to 3.14 since is a very big issue (board not even booting).
Thanks a lot and best regards,
Javierarch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/omap3-igep0020.dts +1
-1@@ -14,7 +14,7 @@ / { model = "IGEPv2 (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default";arch/arm/boot/dts/omap3-igep0030.dts +1
-2@@ -13,7 +13,7 @@ / { model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; leds { pinctrl-names = "default"; --Quoted 2 lines
1.8.5.3
I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.
Quoted 4 lines
Quoted 1 line
Are you planning to send more fixes for 3.14?
Yes hoping to send one more set, got this one tagged for it.
Great, thanks a lot for your help!
Best regards,
Javier
Tony Lindgren
AppliedPATCH 1/1 ARM: dts: omap3-igep: fix boot fail due wrong compatible match
Quoted 11 lines · Javier Martinez Canillas
Quoted 8 lines · Tony Lindgren
Quoted 4 lines · Javier Martinez Canillas
I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.
Are you planning to send more fixes for 3.14?
Yes hoping to send one more set, got this one tagged for it.
Great, thanks a lot for your help!
Applied to omap-for-v3.14/fixes and pushed out now thanks.
Tony