Samba4 package

new file mode 100644
index 0000000..f093d91
@@ -0,0 +1,205 @@
+Add a backport of http://bugs.python.org/issue16235 so we can use
+python-config for cross builds.
+This basically replaces the python version of python-config with a pure-shell
+version that's already preprocessed when installed and doesn't depend
+on the sysconfig import that usually leads to bad data/results.
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+
+diff -Nura Python-2.7.6.orig/configure.ac Python-2.7.6/configure.ac
+--- Python-2.7.6.orig/configure.ac	2014-02-25 12:48:16.726535439 -0300
++++ Python-2.7.6/configure.ac	2014-02-25 12:49:00.992176462 -0300
+@@ -868,6 +868,7 @@
+ 
+ # Other platforms follow
+ if test $enable_shared = "yes"; then
++  PY_ENABLE_SHARED=1
+   AC_DEFINE(Py_ENABLE_SHARED, 1, [Defined if Python is built as a shared library.])
+   case $ac_sys_system in
+     BeOS*)
+@@ -928,6 +929,7 @@
+ 
+   esac
+ else # shared is disabled
++  PY_ENABLE_SHARED=0
+   case $ac_sys_system in
+     CYGWIN*)
+           BLDLIBRARY='$(LIBRARY)'
+@@ -1905,6 +1907,9 @@
+ AC_SUBST(BLDSHARED)
+ AC_SUBST(CCSHARED)
+ AC_SUBST(LINKFORSHARED)
++AC_SUBST(PY_ENABLE_SHARED)
++LIBPL="${prefix}/lib/python${VERSION}/config"
++AC_SUBST(LIBPL)
+ # SO is the extension of shared libraries `(including the dot!)
+ # -- usually .so, .sl on HP-UX, .dll on Cygwin
+ AC_MSG_CHECKING(SO)
+@@ -4529,7 +4534,7 @@
+ AC_MSG_RESULT(done)
+ 
+ # generate output files
+-AC_CONFIG_FILES(Makefile.pre Modules/Setup.config Misc/python.pc)
++AC_CONFIG_FILES(Makefile.pre Modules/Setup.config Misc/python.pc Misc/python-config.sh)
+ AC_CONFIG_FILES([Modules/ld_so_aix], [chmod +x Modules/ld_so_aix])
+ AC_OUTPUT
+ 
+diff -Nura Python-2.7.6.orig/Makefile.pre.in Python-2.7.6/Makefile.pre.in
+--- Python-2.7.6.orig/Makefile.pre.in	2014-02-25 12:48:16.611533773 -0300
++++ Python-2.7.6/Makefile.pre.in	2014-02-25 12:49:00.993176482 -0300
+@@ -161,7 +161,7 @@
+ SUBDIRSTOO=	Include Lib Misc Demo
+ 
+ # Files and directories to be distributed
+-CONFIGFILES=	configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in
++CONFIGFILES=	configure configure.ac acconfig.h pyconfig.h.in Makefile.pre.in Misc/python-config.sh
+ DISTFILES=	README ChangeLog $(CONFIGFILES)
+ DISTDIRS=	$(SUBDIRS) $(SUBDIRSTOO) Ext-dummy
+ DIST=		$(DISTFILES) $(DISTDIRS)
+@@ -405,7 +405,7 @@
+ 
+ # Default target
+ all:		build_all
+-build_all:	$(BUILDPYTHON) oldsharedmods sharedmods gdbhooks
++build_all:	$(BUILDPYTHON) oldsharedmods sharedmods gdbhooks python-config
+ 
+ # Compile a binary with gcc profile guided optimization.
+ profile-opt:
+@@ -1045,10 +1045,12 @@
+ 	fi; \
+ 	cd $(srcdir)/Lib/$(PLATDIR); $(RUNSHARED) ./regen
+ 
+-python-config: $(srcdir)/Misc/python-config.in
++python-config: $(srcdir)/Misc/python-config.in Misc/python-config.sh
+ 	# Substitution happens here, as the completely-expanded BINDIR
+ 	# is not available in configure
+-	sed -e "s, at EXENAME@,$(BINDIR)/python$(VERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config
++	sed -e "s, at EXENAME@,$(BINDIR)/python$(VERSION)$(EXE)," < $(srcdir)/Misc/python-config.in >python-config.py
++	# Replace makefile compat. variable references with shell script compat. ones; $(VAR) -> ${VAR}
++	sed -e 's,\$$(\([A-Za-z0-9_]*\)),\$$\{\1\},g' Misc/python-config.sh >python-config
+ 
+ # Install the include files
+ INCLDIRSTOMAKE=$(INCLUDEDIR) $(CONFINCLUDEDIR) $(INCLUDEPY) $(CONFINCLUDEPY)
+@@ -1107,7 +1109,7 @@
+ 	$(INSTALL_SCRIPT) $(srcdir)/Modules/makesetup $(DESTDIR)$(LIBPL)/makesetup
+ 	$(INSTALL_SCRIPT) $(srcdir)/install-sh $(DESTDIR)$(LIBPL)/install-sh
+ 	$(INSTALL_SCRIPT) python-config $(DESTDIR)$(BINDIR)/python$(VERSION)-config
+-	rm python-config
++	$(INSTALL_SCRIPT) python-config.py $(DESTDIR)$(LIBPL)/python-config.py
+ 	@if [ -s Modules/python.exp -a \
+ 		"`echo $(MACHDEP) | sed 's/^\(...\).*/\1/'`" = "aix" ]; then \
+ 		echo; echo "Installing support files for building shared extension modules on AIX:"; \
+@@ -1287,6 +1289,7 @@
+ 		config.cache config.log pyconfig.h Modules/config.c
+ 	-rm -rf build platform
+ 	-rm -rf $(PYTHONFRAMEWORKDIR)
++	-rm -f python-config.py python-config
+ 
+ # Make things extra clean, before making a distribution:
+ # remove all generated files, even Makefile[.pre]
+diff -Nura Python-2.7.6.orig/Misc/python-config.sh.in Python-2.7.6/Misc/python-config.sh.in
+--- Python-2.7.6.orig/Misc/python-config.sh.in	1969-12-31 21:00:00.000000000 -0300
++++ Python-2.7.6/Misc/python-config.sh.in	2014-02-25 12:49:00.993176482 -0300
+@@ -0,0 +1,102 @@
++#!/bin/sh
++
++exit_with_usage ()
++{
++	echo "Usage: $0 --prefix|--exec-prefix|--includes|--libs|--cflags|--ldflags|--extension-suffix|--help|--configdir"
++	exit $1
++}
++
++if [ "$1" = "" ] ; then
++	exit_with_usage 1
++fi
++
++# Returns the actual prefix where this script was installed to.
++installed_prefix ()
++{
++	RESULT=$(dirname $(cd $(dirname "$1") && pwd -P))
++	if which readlink >/dev/null 2>&1 ; then
++	RESULT=$(readlink -f "$RESULT")
++	fi
++	echo $RESULT
++}
++
++prefix_build="@prefix@"
++prefix_real=$(installed_prefix "$0")
++
++# Use sed to fix paths from their built to locations to their installed to locations.
++prefix=$(echo "$prefix_build" | sed "s#$prefix_build#$prefix_real#")
++exec_prefix_build="@exec_prefix@"
++exec_prefix=$(echo "$exec_prefix_build" | sed "s#$exec_prefix_build#$prefix_real#")
++includedir=$(echo "@includedir@")
++libdir=$(echo "@libdir@" | sed "s#$prefix_build#$prefix_real#")
++CFLAGS=$(echo "@CFLAGS@" | sed "s#$prefix_build#$prefix_real#")
++VERSION="@VERSION@"
++LIBM="@LIBM@"
++LIBC="@LIBC@"
++SYSLIBS="$LIBM $LIBC"
++LIBS="@LIBS@ $SYSLIBS -lpython${VERSION}"
++BASECFLAGS="@BASECFLAGS@"
++LDLIBRARY="@LDLIBRARY@"
++LINKFORSHARED="@LINKFORSHARED@"
++OPT="@OPT@"
++PY_ENABLE_SHARED="@PY_ENABLE_SHARED@"
++LDVERSION="@LDVERSION@"
++LIBDEST=${prefix}/lib/python${VERSION}
++LIBPL=$(echo "@LIBPL@" | sed "s#$prefix_build#$prefix_real#")
++SO="@SO@"
++PYTHONFRAMEWORK="@PYTHONFRAMEWORK@"
++INCDIR="-I$includedir/python${VERSION}"
++PLATINCDIR="-I$includedir/python${VERSION}"
++
++# Scan for --help or unknown argument.
++for ARG in $*
++do
++	case $ARG in
++	--help)
++		exit_with_usage 0
++	;;
++	--prefix|--exec-prefix|--includes|--libs|--cflags|--ldflags|--extension-suffix|--abiflags|--configdir)
++	;;
++	*)
++		exit_with_usage 1
++	;;
++esac
++done
++
++for ARG in "$@"
++do
++	case "$ARG" in
++	--prefix)
++		echo "$prefix"
++	;;
++	--exec-prefix)
++		echo "$exec_prefix"
++	;;
++	--includes)
++		 echo "$INCDIR $PLATINCDIR"
++	;;
++	--cflags)
++		echo "$INCDIR $PLATINCDIR $BASECFLAGS $CFLAGS $OPT"
++	;;
++	--libs)
++		echo "$LIBS"
++	;;
++	--ldflags)
++		LINKFORSHAREDUSED=
++		if [ -z "$PYTHONFRAMEWORK" ] ; then
++			LINKFORSHAREDUSED=$LINKFORSHARED
++		fi
++		LIBPLUSED=
++		if [ "$PY_ENABLE_SHARED" = "0" ] ; then
++			LIBPLUSED="-L$LIBPL"
++		fi
++		echo "$LIBPLUSED -L$libdir $LIBS $LINKFORSHAREDUSED"
++	;;
++	--extension-suffix)
++		echo "$SO"
++	;;
++	--configdir)
++		echo "$LIBPL"
++	;;
++esac
++done

new file mode 100644
index 0000000..b8fbd2a
@@ -0,0 +1,195 @@
+Add roken-h-process.pl from:
+https://raw.github.com/heimdal/heimdal/master/cf/roken-h-process.pl
+It's required for cross-compiling and missing from release tarballs:
+http://kerberos.996246.n3.nabble.com/Missing-roken-h-process-pl-when-cross-compiling-v1-5-2-td38806.html
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+
+diff -Nura heimdal-1.5.3.orig/cf/roken-h-process.pl heimdal-1.5.3/cf/roken-h-process.pl
+--- heimdal-1.5.3.orig/cf/roken-h-process.pl	1969-12-31 21:00:00.000000000 -0300
++++ heimdal-1.5.3/cf/roken-h-process.pl	2013-12-18 11:32:38.157625167 -0300
+@@ -0,0 +1,184 @@
++#!/usr/bin/perl
++
++require 'getopts.pl';
++
++my $debug = 0;
++
++Getopts('dc:p:o:') || die "foo";
++
++if ($opt_d) {
++    $debug = 1;
++}
++
++die "missing arg" if (!defined $opt_c || !defined $opt_p || !defined $opt_o);
++
++my %defines;
++my $IN;
++my $OUT;
++
++print "parse config.h\n" if ($debug);
++
++open IN, $opt_c || die "failed open ${opt_c}";
++
++my @nesting;
++
++push @nesting, 1;
++
++while (<IN>) {
++    if (m/\s*#ifdef\s+(.*)/) {
++	my $var = $1;
++	if (defined $defines{$var}) {
++	    push @nesting, 1;
++	} else {
++	    push @nesting, 0;
++	}
++	next;
++    } elsif (m/\s*#ifndef\s+(.*)/) {
++	my $var = $1;
++	if (defined $defines{$var}) {
++	    push @nesting, 0;
++	} else {
++	    push @nesting, 1;
++	}
++	next;
++    } elsif (m/\s*#else/) {
++	my $var = pop @nesting;
++	$var = !$var;
++	push @nesting, $var;
++	next;
++    } elsif ($nesting[$#nesting] and m/\s*#define\s+(\w+)\s+(\S+)/) {
++	my $res = $2;
++	$res = 1 if (!defined $res);
++	$defines{$1} = $res;
++    }
++}
++
++close IN;
++
++if ($debug) {
++    foreach my $i (keys %defines) {
++	print "k: $i v: $defines{$i}\n";
++    }
++}
++
++open IN, "$opt_p" || die "failed open ${opt_p}";
++open OUT, ">$opt_o" || die "failed open ${opt_o}";
++
++print "parse roken.h.in\n" if ($debug);
++
++print OUT "/* This is an OS dependent, generated file */\n";
++print OUT "\n";
++print OUT "\n";
++print OUT "#ifndef __ROKEN_H__\n";
++print OUT "#define __ROKEN_H__\n";
++print OUT "\n";
++
++ at nesting = (1);
++
++while (<IN>) {
++    if (m/\s*#ifdef\s+(.*)/) {
++	my $var = $1;
++	if (defined $defines{$var}) {
++	    push @nesting, 1;
++	} else {
++	    push @nesting, 0;
++	}
++	next;
++    } elsif (m/\s*#ifndef\s+(.*)/) {
++	my $var = $1;
++	if (defined $defines{$var}) {
++	    push @nesting, 0;
++	} else {
++	    push @nesting, 1;
++	}
++	next;
++    } elsif (m/\s*#if\s+(.*)/) {
++	my $res = parse_if($1);
++	print "line = $res: $1\n" if ($debug);
++	push @nesting, $res;
++	next;
++    } elsif (m/\s*#elif\s+(.*)/) {
++	my $res = pop @nesting;
++	if ($res gt 0) {
++	    $res = -1;
++	} else {
++	    my $res = parse_if($1);
++	}
++	push @nesting, $res;
++	next;
++    } elsif (m/\s*#else/) {
++	my $var = pop @nesting;
++	$var = !$var;
++	push @nesting, $var;
++	next;
++    } elsif (m/\s*#endif/) {
++	pop @nesting;
++	next;
++    }
++    print "line: $_\n"  if ($debug);
++    print "nesting dep $#{nesting}\n"  if ($debug);
++    my $i = 0, $t = 1;
++    while ($i le $#nesting) {
++	$t = 0 if ($nesting[$i] le 0);
++	print "nesting $i val $nesting[$i] -> $t\n" if ($debug);
++	$i++;
++    }
++    if ($t) {
++	print OUT;
++    }
++}
++
++print OUT "\n";
++print OUT "#endif /* __ROKEN_H__ */\n";
++
++
++close IN;
++
++exit 0;
++
++sub parse_if
++{
++    my ($neg, $var);
++
++    $_ = shift;
++
++    if (m/^\s*$/) {
++	print "end $_\n" if ($debug);
++	return 1;
++    } elsif (m/^([^&]+)\&\&(.*)$/) {
++	print "$1 and $2\n" if ($debug);
++	return parse_if($1) and parse_if($2);
++    } elsif (m/^\(([^&]+)\&\&(.*)$/) {
++	print "$1 and $2\n" if ($debug);
++	return parse_if($1) and parse_if($2);
++    } elsif (m/^([^\|]+)\|\|(.*)$/) {
++	print "$1 or $2\n" if ($debug);
++	return parse_if($1) or parse_if($2);
++    } elsif (m/^\s*(\!)?\s*defined\((\w+)\)/) {
++	($neg, $var) = ($1, $2);
++	print "def: ${neg}-defined(${var})\n" if ($debug);
++	my $res = defined $defines{$var};
++	if ($neg eq "!") {
++	    if ($res) {
++		$res = 0;
++	    } else {
++		$res = 1;
++	    }
++	}
++	print "res: $res\n" if ($debug);
++	return $res;
++    } elsif (m/^\s*(\!)?(\w+)/) {
++	($neg, $var) = ($1, $2);
++	print "var: $neg $var\n" if ($debug);
++	my $res;
++	if (defined $defines{$var}) {
++	    $res = $defines{$var};
++	} else {
++	    $res = 0;
++	}
++	$res = ! $res if ($neg =~ m/!/);
++	print "res: $res\n" if ($debug);
++	return $res;
++    }
++    die "failed parse: $_\n";
++}

new file mode 100644
index 0000000..134b888
@@ -0,0 +1,30 @@
+From 6080c0b229c6e332d7dd609d9435ac9baeeea443 Mon Sep 17 00:00:00 2001
+From: Gustavo Zacarias <[email protected]>
+Date: Thu, 30 Jan 2014 16:33:02 -0300
+Subject: [PATCH] roken-h-process: use Getopt::Std, getopts.pl is deprecated
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+---
+ cf/roken-h-process.pl | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/cf/roken-h-process.pl b/cf/roken-h-process.pl
+index 153a35c..72d3bd3 100644
+--- a/cf/roken-h-process.pl
++++ b/cf/roken-h-process.pl
+@@ -1,10 +1,10 @@
+ #!/usr/bin/perl
+ 
+-require 'getopts.pl';
++use Getopt::Std;
+ 
+ my $debug = 0;
+ 
+-Getopts('dc:p:o:') || die "foo";
++getopts('dc:p:o:') || die "foo";
+ 
+ if ($opt_d) {
+     $debug = 1;
+-- 
+1.8.3.2
+

new file mode 100644
index 0000000..1ccd629
@@ -0,0 +1,19 @@
+Add --vendor option to krb5-config, required by samba 4.
+Status: Backport from upstream git.
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+
+diff -Nura heimdal-1.5.3.orig/tools/krb5-config.in heimdal-1.5.3.vendor/tools/krb5-config.in
+--- heimdal-1.5.3.orig/tools/krb5-config.in	2012-12-09 19:06:44.000000000 -0300
++++ heimdal-1.5.3.vendor/tools/krb5-config.in	2013-12-18 15:49:45.283986300 -0300
+@@ -50,6 +50,10 @@
+     do_usage=yes
+     usage_exit=0
+     ;;
++  --vendor)
++    echo "Heimdal";
++    exit 0
++    ;;
+   --version)
+     echo "@PACKAGE@ @VERSION@"
+     exit 0

new file mode 100644
index 0000000..6bdec6f
@@ -0,0 +1,28 @@
+Use compile_et from e2fsprogs rather than building the native and useless one
+from heimdal.
+
+Idea from:
+http://comments.gmane.org/gmane.comp.encryption.kerberos.heimdal.general/6572
+
+Status: Backport from upstream git.
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+
+diff -Nura heimdal-1.5.3.orig/cf/check-compile-et.m4 heimdal-1.5.3.et/cf/check-compile-et.m4
+--- heimdal-1.5.3.orig/cf/check-compile-et.m4	2012-12-09 19:06:44.000000000 -0300
++++ heimdal-1.5.3.et/cf/check-compile-et.m4	2013-12-18 14:20:04.025925879 -0300
+@@ -3,12 +3,12 @@
+ dnl CHECK_COMPILE_ET
+ AC_DEFUN([CHECK_COMPILE_ET], [
+ 
+-AC_CHECK_PROG(COMPILE_ET, compile_et, [compile_et])
++AC_CHECK_PROG(COMPILE_ET, compile_et, [compile_et], [no])
+ 
+ krb_cv_compile_et="no"
+ krb_cv_com_err_need_r=""
+ krb_cv_compile_et_cross=no
+-if test "${COMPILE_ET}" = "compile_et"; then
++if test "$COMPILE_ET" != "no"; then
+ 
+ dnl We have compile_et.  Now let's see if it supports `prefix' and `index'.
+ AC_MSG_CHECKING(whether compile_et has the features we need)

new file mode 100644
index 0000000..c73b33e
@@ -0,0 +1,30 @@
+################################################################################
+#
+# heimdal
+#
+################################################################################
+
+HEIMDAL_VERSION = 1.5.3
+HEIMDAL_SITE = http://www.h5l.org/dist/src
+HEIMDAL_DEPENDENCIES = host-e2fsprogs host-pkgconf
+HEIMDAL_INSTALL_STAGING = YES
+# static because of -fPIC issues with e2fsprogs on x86_64 host
+HOST_HEIMDAL_CONF_OPT = --with-x=no --disable-shared --enable-static
+HOST_HEIMDAL_CONF_ENV = MAKEINFO=true
+HEIMDAL_MAKE = $(MAKE1)
+# For heimdal-0004-compile_et.patch
+HEIMDAL_AUTORECONF = YES
+HEIMDAL_LICENSE = BSD-3c
+HEIMDAL_LICENSE_FILES = LICENSE
+
+# We need asn1_compile in the PATH for samba4
+define HOST_HEIMDAL_MAKE_SYMLINK
+	ln -sf $(HOST_DIR)/usr/libexec/heimdal/asn1_compile \
+		$(HOST_DIR)/usr/bin/asn1_compile
+	ln -sf $(HOST_DIR)/usr/bin/compile_et \
+		$(HOST_DIR)/usr/libexec/heimdal/compile_et
+endef
+
+HOST_HEIMDAL_POST_INSTALL_HOOKS += HOST_HEIMDAL_MAKE_SYMLINK
+
+$(eval $(host-autotools-package))

index 1469075..c5b7e48 100644
@@ -4,9 +4,9 @@ config BR2_PACKAGE_SAMBA
 	depends on BR2_USE_MMU # fork()
 	select BR2_PACKAGE_POPT
 	help
-	  Provides print services to all manner of SMB/CIFS clients,
-	  including the numerous versions of Microsoft Windows
-	  operating systems.
+	  Provides secure, stable and fast file and print services
+	  for all clients using the SMB/CIFS protocol, such as all
+	  versions of DOS, Windows, OS/2, Linux and many others.
 
 	  http://www.samba.org/
 

similarity index 100%
rename from package/samba/samba-fix-smbd-libs-avahi.patch
rename to package/samba/samba-0001-fix-smbd-libs-avahi.patch

similarity index 100%
rename from package/samba/samba-getaddrinfo.patch
rename to package/samba/samba-0002-getaddrinfo.patch

index 4bdd885..96ad80c 100644
@@ -956,6 +956,7 @@ source "package/rsync/Config.in"
 source "package/rtorrent/Config.in"
 source "package/rtptools/Config.in"
 source "package/samba/Config.in"
+source "package/samba4/Config.in"
 source "package/sconeserver/Config.in"
 source "package/ser2net/Config.in"
 source "package/smcroute/Config.in"

new file mode 100644
index 0000000..b8d4154
@@ -0,0 +1,24 @@
+config BR2_PACKAGE_SAMBA4
+	bool "samba4"
+	depends on !BR2_PACKAGE_SAMBA
+	depends on BR2_INET_IPV6
+	depends on BR2_USE_MMU # fork()
+	depends on BR2_USE_WCHAR # e2fsprogs
+	depends on BR2_LARGEFILE
+	depends on BR2_TOOLCHAIN_HAS_THREADS # talloc python threads
+	# Supported architectures only limited by the cached answers
+	depends on BR2_arm || BR2_powerpc
+	select BR2_PACKAGE_E2FSPROGS
+	select BR2_PACKAGE_POPT
+	select BR2_PACKAGE_PYTHON
+	select BR2_PACKAGE_ZLIB
+	help
+	  Provides secure, stable and fast file and print services
+	  for all clients using the SMB/CIFS protocol, such as all
+	  versions of DOS, Windows, OS/2, Linux and many others.
+
+	  http://www.samba.org/
+
+comment "samba4 needs a toolchain w/ IPv6, wchar, largfile, threads"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_LARGEFILE || \
+		!BR2_USE_WCHAR || !BR2_INET_IPV6

56 lines not on this page · raw message

65 lines not on this page · raw message

65 lines not on this page · raw message

69 lines not on this page · raw message

new file mode 100644
index 0000000..ec46650
@@ -0,0 +1,33 @@
+From 3c16a171c008b584ed427988dde73c1d9a9de4ad Mon Sep 17 00:00:00 2001
+From: Gustavo Zacarias <[email protected]>
+Date: Mon, 20 Jan 2014 10:17:19 -0300
+Subject: [PATCH 2/3] build: don't execute statfs and f_fsid checks
+
+There's no need to execute the statfs and statfs.f_fsid checks, the
+return value is of no consequence since it's undefined in some
+platforms and prevents cross-compiling.
+
+Status: sent, not yet upstream pending more testing.
+
+Signed-off-by: Gustavo Zacarias <[email protected]>
+---
+ source3/wscript | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/source3/wscript b/source3/wscript
+index 501707b..2d0a62e 100644
+--- a/source3/wscript
++++ b/source3/wscript
+@@ -468,8 +468,7 @@ return acl_get_perm_np(permset_d, perm);
+     conf.CHECK_CODE('struct statfs fsd; fsid_t fsid = fsd.f_fsid; return statfs(".", &fsd);',
+                     'HAVE_STATFS_F_FSID',
+                     msg="vfs_fileid: checking for statfs() and struct statfs.f_fsid",
+-                    headers='sys/types.h sys/statfs.h',
+-                    execute=True)
++                    headers='sys/types.h sys/statfs.h')
+ 
+     if conf.CONFIG_SET('HAVE_FALLOCATE'):
+         conf.CHECK_CODE('''
+-- 
+1.8.3.2
+

56 lines not on this page · raw message

47 lines not on this page · raw message

42 lines not on this page · raw message

113 lines not on this page · raw message