regulator: pfuze100: Add terminate entry for [i2c|of]_device_id tables
PATCH 1/1 regulator: pfuze100: Add terminate entry for [i2c|of]_device_id tables
Also remove PFUZE_NUM to avoid below build warnings:
CC [M] drivers/regulator/pfuze100-regulator.odrivers/regulator/pfuze100-regulator.c:86:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:86:2: warning: (near initialization for 'pfuze_device_id') [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: (near initialization for 'pfuze_dt_ids') [enabled by default]
--- drivers/regulator/pfuze100-regulator.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/regulator/pfuze100-regulator.c +5 -3
@@ -56,7 +56,7 @@#define PFUZE100_VGEN5VOL 0x70#define PFUZE100_VGEN6VOL 0x71 -enum chips {PFUZE100 ,PFUZE200 ,PFUZE_NUM }; +enum chips {PFUZE100 ,PFUZE200 };struct pfuze_regulator {struct regulator_desc desc;
@@ -80,15 +80,17 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; -static const struct i2c_device_id pfuze_device_id[PFUZE_NUM ] = { +static const struct i2c_device_id pfuze_device_id[] = { {.name ="pfuze100" , .driver_data =PFUZE100 }, {.name ="pfuze200" , .driver_data =PFUZE200 }, + { } };MODULE_DEVICE_TABLE (i2c, pfuze_device_id); -static const struct of_device_id pfuze_dt_ids[PFUZE_NUM ] = { +static const struct of_device_id pfuze_dt_ids[] = { { .compatible ="fsl,pfuze100" , .data = (void *)PFUZE100 }, { .compatible ="fsl,pfuze200" , .data = (void *)PFUZE200 }, + { } };MODULE_DEVICE_TABLE (of, pfuze_dt_ids);
Signature · 1 line
1.8.1.2
-----Original Message-----
From: Axel Lin [mailto:[email protected]]
Sent: Tuesday, March 04, 2014 6:20 PM
To: Mark Brown
Cc: Gong Yibin-B38343; Liam Girdwood; [email protected]
Subject: [PATCH] regulator: pfuze100: Add terminate entry for [i2c|of]_device_id tables
Also remove PFUZE_NUM to avoid below build warnings:
CC [M] drivers/regulator/pfuze100-regulator.odrivers/regulator/pfuze100-regulator.c:86:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:86:2: warning: (near initialization for 'pfuze_device_id') [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: (near initialization for 'pfuze_dt_ids') [enabled by default]
--- drivers/regulator/pfuze100-regulator.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/regulator/pfuze100-regulator.c +5 -4
@@ -56,7 +56,7 @@#define PFUZE100_VGEN5VOL 0x70#define PFUZE100_VGEN6VOL 0x71 -enum chips {PFUZE100 ,PFUZE200 ,PFUZE_NUM }; +enum chips {PFUZE100 ,PFUZE200 };struct pfuze_regulator {struct regulator_desc desc;
@@ -80,15 +80,17 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; -static const struct i2c_device_id pfuze_device_id[PFUZE_NUM ] = { +static const struct i2c_device_id pfuze_device_id[] = { {.name ="pfuze100" , .driver_data =PFUZE100 }, {.name ="pfuze200" , .driver_data =PFUZE200 }, + { } };MODULE_DEVICE_TABLE (i2c, pfuze_device_id); -static const struct of_device_id pfuze_dt_ids[PFUZE_NUM ] = { +static const struct of_device_id pfuze_dt_ids[] = { { .compatible ="fsl,pfuze100" , .data = (void *)PFUZE100 }, { .compatible ="fsl,pfuze200" , .data = (void *)PFUZE200 }, + { } };MODULE_DEVICE_TABLE (of, pfuze_dt_ids); --
1.8.1.2
���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Quoted 1 line · Axel Lin
Also remove
PFUZE_NUMto avoid below build warnings:
Applied, thanks.