dts: add support for MMC on socfpga boards
PATCH 1/1 dts: add support for MMC on socfpga boards
Add DTS binding for MMC on socfpga boards. Tested on Sockit.
Signed-off-by Pavel Machek <[email protected]>
arch/arm/boot/dts/socfpga.dtsi +17 -0
@@ -521,6 +521,23 @@ reg-io-width = <4>; }; + mmc: dwmmc0 at ff704000 { + compatible = "snps,dw-mshc"; + reg = <0xff704000 0x1000>; + interrupts = <0 139 4>; + clock-frequency = <12500000>; /*12.5 MHz*/ + #address-cells = <1>; + #size-cells = <0>; + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x400>; + slot at 0 { + reg = <0>; + bus-width = <4>; + }; + }; + rstmgr at ffd05000 { compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>;
Quoted 23 lines · ZY - pavel
Add DTS binding for MMC on socfpga boards. Tested on Sockit.
Signed-off-by Pavel Machek <[email protected]>arch/arm/boot/dts/socfpga.dtsi +10
-0@@ -521,6 +521,23 @@ reg-io-width = <4>; }; + mmc: dwmmc0 at ff704000 { + compatible = "snps,dw-mshc"; + reg = <0xff704000 0x1000>; + interrupts = <0 139 4>; + clock-frequency = <12500000>; /*12.5 MHz*/ + #address-cells = <1>; + #size-cells = <0>; + num-slots = <1>; + supports-highspeed; + broken-cd;
arch/arm/boot/dts/socfpga.dtsi line 543
Quoted 10 lines
arch/arm/boot/dts/socfpga.dtsi +7
-0+ fifo-depth = <0x400>; + slot at 0 { + reg = <0>; + bus-width = <4>; + }; + }; + rstmgr at ffd05000 { compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>;
This is already queued in Chris Ball's MMC tree.
Thanks,
Dinh
Hello.
arch/arm/boot/dts/socfpga.dtsi line 524
Quoted 13 lines · Pavel Machek
Add DTS binding for MMC on socfpga boards. Tested on Sockit.
Signed-off-by Pavel Machek <[email protected]>arch/arm/boot/dts/socfpga.dtsi +1
-0@@ -521,6 +521,23 @@ reg-io-width = <4>; }; + mmc: dwmmc0@ff704000 {
ePAPR standard [1] tells us in section 2.2.2:
The name of a node should be somewhat generic, reflecting the function of the device and not its 3 precise programming model.
So, please name the node just "mmc@ff704000". You can choose whatever
label you like.
[1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
WBR, Sergei