Skip to contentSkip to conversation

mfd: da9055: Add DT support & documentation for PMIC

PATCH Applied Adam Thomson 2 participants 5 messages Mar 5, 2014 – Mar 6, 2014

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover mfd: da9055: Add DT support & documentation for PMIC

This patch set adds DT support for the MFD core of the da9055 PMIC, and adds the accompanying DT binding documentation for the device.

v2: Small tidy-ups to documentation (remove new-line, use IRQ related defines)

Adam Thomson (2):
mfd: da9055: Add DT support for PMIC
mfd: da9055: Add DT binding documentation for PMIC

 Documentation/devicetree/bindings/mfd/da9055.txt |   72 ++++++++++++++++++++++
 drivers/mfd/da9055-i2c.c                         |    8 +++
 2 files changed, 80 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/da9055.txt

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw

PATCH v2 1/2 mfd: da9055: Add DT support for PMIC

---
 drivers/mfd/da9055-i2c.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
drivers/mfd/da9055-i2c.c +8 -0
index 8103e43..d4d4c16 100644
@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/mfd/da9055/core.h>
 
@@ -66,6 +68,11 @@ static struct i2c_device_id da9055_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
 
+static const struct of_device_id da9055_of_match[] = {
+	{ .compatible = "dlg,da9055-pmic", },
+	{ }
+};
+
 static struct i2c_driver da9055_i2c_driver = {
 	.probe = da9055_i2c_probe,
 	.remove = da9055_i2c_remove,
@@ -73,6 +80,7 @@ static struct i2c_driver da9055_i2c_driver = {
 	.driver = {
 		.name = "da9055-pmic",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(da9055_of_match),
 	},
 };
 

--
1.7.0.4

Applied
#2 lore raw

Re: [PATCH v2 1/2] mfd: da9055: Add DT support for PMIC

Quoted 5 lines
---
 drivers/mfd/da9055-i2c.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

Applied, thanks.

Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#3 lore raw

PATCH v2 2/2 mfd: da9055: Add DT binding documentation for PMIC

In reply to Adam Thomson
---
 Documentation/devicetree/bindings/mfd/da9055.txt |   72 ++++++++++++++++++++++
 1 files changed, 72 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/da9055.txt
Documentation/devicetree/bindings/mfd/da9055.txt new file +72 -0
new file mode 100644
index 0000000..6dab34d
@@ -0,0 +1,72 @@
+* Dialog DA9055 Power Management Integrated Circuit (PMIC)
+
+DA9055 consists of a large and varied group of sub-devices (I2C Only):
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+da9055-gpio		:		: GPIOs
+da9055-regulator	:		: Regulators
+da9055-onkey		:		: On key
+da9055-rtc		:		: RTC
+da9055-hwmon		:		: ADC
+da9055-watchdog		:		: Watchdog
+
+The CODEC device in DA9055 has a separate, configurable I2C address and so
+is instantiated separately from the PMIC.
+
+For details on accompanying CODEC I2C device, see the following:
+Documentation/devicetree/bindings/sound/da9055.txt
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9055-pmic"
+- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the IRQs from da9055 are delivered to.
+- interrupts: IRQ line info for da9055 chip.
+- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
+- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9055 regulators are
+  bound using their names as listed below:
+
+    buck1     : regulator BUCK1
+    buck2     : regulator BUCK2
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Example:
+
+	pmic: da9055-pmic@5a {
+		compatible = "dlg,da9055-pmic";
+		reg = <0x5a>;
+		interrupt-parent = <&intc>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <2075000>;
+			};
+			buck2: BUCK2 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+			ldo1: LDO1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

--
1.7.0.4

Applied
#4 lore raw

Re: [PATCH v2 2/2] mfd: da9055: Add DT binding documentation for PMIC

Quoted 6 lines
---
 Documentation/devicetree/bindings/mfd/da9055.txt |   72 ++++++++++++++++++++++
 1 files changed, 72 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/da9055.txt

Applied, thanks.

Signature · 8 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html