board/BuR/common: fix phy addresses
PATCH 1/1 board/BuR/common: fix phy addresses
B&R boards are using Phy Addresses 'one' and 'two', prior this was defined through #define PHYADDR 1 within a header file. Now this is addresses are given with device-driver structure.
Signed-off-by Hannes Petermaier <[email protected]>
--- board/BuR/common/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
board/BuR/common/common.c +2 -2
@@ -141,12 +141,12 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_addr = 0, + .phy_addr = 1, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, + .phy_addr = 2, }, };
Signature · 1 line
1.7.10.4
PATCH 1/1 board/BuR/common: fix phy addresses
Quoted 5 lines · Hannes Petermaier
B&R boards are using Phy Addresses 'one' and 'two', prior this was defined through #define PHYADDR 1 within a header file. Now this is addresses are given with device-driver structure.
Signed-off-by Hannes Petermaier <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140306/4cae199b/attachment.pgp>