Skip to contentSkip to conversation

Initial support for i.mx6 sabreauto board

PATCH New Abdul Hussain 2 participants 2 messages Nov 8, 2013 – Mar 7, 2014 Arm i.MX and Layerscape

lore
Share & tools
lore

Abdul Hussain

author
#0 lore raw

PATCH 1/1 Initial support for i.mx6 sabreauto board

Signed-off-by Abdul Hussain <[email protected]>
---
 configs/freescale_imx6sabreauto_defconfig |    9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 configs/freescale_imx6sabreauto_defconfig
configs/freescale_imx6sabreauto_defconfig new file +9 -0
new file mode 100644
index 0000000..d02a395
@@ -0,0 +1,9 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/snapshot/linux-2.6-imx-imx_3.0.35_4.1.0.tar.bz2"
+BR2_LINUX_KERNEL_DEFCONFIG="imx6"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto"
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 Initial support for i.mx6 sabreauto board

Dear Abdul Hussain,

Quoted 12 lines · Abdul Hussain
Signed-off-by Abdul Hussain <[email protected]>
---
 configs/freescale_imx6sabreauto_defconfig |    9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 configs/freescale_imx6sabreauto_defconfig
configs/freescale_imx6sabreauto_defconfig new file +0 -0
new file mode 100644
index 0000000..d02a395

configs/freescale_imx6sabreauto_defconfig line 9

Quoted 9 lines
configs/freescale_imx6sabreauto_defconfig new file +9 -0
@@ -0,0 +1,9 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/snapshot/linux-2.6-imx-imx_3.0.35_4.1.0.tar.bz2"
+BR2_LINUX_KERNEL_DEFCONFIG="imx6"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto"

A specific U-Boot version should be used, see all the other defconfig files we have in Buildroot.

Also, a specific kernel headers version should be specified, which matches the 3.0.x kernel being used here.

Could you take these comments into account, and resubmit an updated version?

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com