Move dai-link level properties away from dai subnodes
Subsystems (4)
cover Move dai-link level properties away from dai subnodes
This patch is implemented on top of late patches from Jean-Francois Moine [1].
The patches implement the main part of the simple-card changes discussed in alsa-devel mailing list.
[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2014-March/074592.html
Best regards,
Jyri
Jyri Sarha (2):
ASoC: core: Update snd_soc_of_parse_daifmt() interface
ASoC: simple-card: Move dai-link level properties away from dai
subnodes
.../devicetree/bindings/sound/simple-card.txt | 91 ++++---- include/sound/soc.h | 4 +- sound/soc/generic/simple-card.c | 237 ++++++++++++-------- sound/soc/soc-core.c | 8 +- 4 files changed, 201 insertions(+), 139 deletions(-)
Signature · 1 line
1.7.9.5
RFC PATCH 1/2 ASoC: core: Update snd_soc_of_parse_daifmt() interface
Adds struct device_node **bitclkmaster and struct device_node **framemaster function parameters. With the new syntax bitclock-master and frame-master properties can explicitly indicate the dai-link bit-clock and frame masters with a phandle.
--- include/sound/soc.h | 4 +++- sound/soc/soc-core.c | 8 +++++++- 2 files changed, 10 insertions(+), 2 deletions(-)
include/sound/soc.h +3 -1
@@ -1228,7 +1228,9 @@ int snd_soc_of_parse_tdm_slot(struct device_node *np,int snd_soc_of_parse_audio_routing (struct snd_soc_card *card,const char *propname);unsigned int snd_soc_of_parse_daifmt (struct device_node *np, -const char *prefix); +const char *prefix, +struct device_node **bitclkmaster, +struct device_node **framemaster);int snd_soc_of_get_dai_name (struct device_node *of_node,const char **dai_name);
sound/soc/soc-core.c +7 -1
@@ -4560,7 +4560,9 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,EXPORT_SYMBOL_GPL (snd_soc_of_parse_audio_routing);unsigned int snd_soc_of_parse_daifmt (struct device_node *np, -const char *prefix) +const char *prefix, +struct device_node **bitclkmaster, +struct device_node **framemaster) {int ret, i;char prop[128 ];
@@ -4643,9 +4645,13 @@ unsigned int snd_soc_of_parse_daifmt(struct device_node *np,*/ snprintf (prop,sizeof (prop),"%sbitclock-master" , prefix); bit = !!of_get_property (np, prop,NULL ); +if (bit && bitclkmaster) + *bitclkmaster =of_parse_phandle (np, prop,0 );snprintf (prop,sizeof (prop),"%sframe-master" , prefix); frame = !!of_get_property (np, prop,NULL ); +if (frame && framemaster) + *framemaster =of_parse_phandle (np, prop,0 );switch ((bit <<4 ) + frame) {case 0x11 :
Signature · 1 line
1.7.9.5
RFC PATCH 2/2 ASoC: simple-card: Move dai-link level properties away from dai subnodes
In reply to Jyri SarhaThe properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle.
--- .../devicetree/bindings/sound/simple-card.txt | 91 ++++---- sound/soc/generic/simple-card.c | 237 ++++++++++++-------- 2 files changed, 191 insertions(+), 137 deletions(-)
Documentation/devicetree/bindings/sound/simple-card.txt +52 -39
@@ -1,6 +1,6 @@ Simple-Card: -Simple-Card specifies audio DAI connection of SoC <-> codec. +Simple-Card specifies audio DAI connections of SoC <-> codec. Required properties:
@@ -8,28 +8,54 @@ Required properties: Optional properties: -- simple-audio-card,name : User specified audio sound card name, one string +- simple-audio-card,name : User specified audio sound card name, +one string property. -- simple-audio-card,format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" - simple-audio-card,widgets : Please refer to widgets.txt. - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. -- dai-tdm-slot-num : Please refer to tdm-slot.txt. -- dai-tdm-slot-width : Please refer to tdm-slot.txt. +Optional subnodes: + +- simple-audio-card,dai-link : Container for dai-link level + properties and the CPU and CODEC + sub-nodes. This container may be + omitted when the card has only one + DAI link. See the examples and the + section bellow. + +Dai-link subnode properties and subnodes: + +If dai-link subnode is omitted and the subnode properties are directly +under "sound"-node the subnode property and subnode names have to be +prefixed with "simple-audio-card,"-prefix. -Required subnodes: +Requred dai-link subnodes: -- simple-audio-card,dai-link : container for the CPU and CODEC sub-nodes - This container may be omitted when the - card has only one DAI link. - See the examples. +- cpu : CPU sub-node +- codec : CODEC sub-node -- simple-audio-card,cpu : CPU sub-node -- simple-audio-card,codec : CODEC sub-node +Optional dai-link subnode properties: + +- format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- frame-master : Indicates dai-link frame master. + phandle to a cpu or codec subnode. +- bitclock-master : Indicates dai-link bit clock master. + phandle to a cpu or codec subnode. +- bitclock-inversion : bool property. Add this if the + dai-link uses bit clock inversion. +- frame-inversion : bool property. Add this if the + dai-link uses frame clock inversion. + +For backward compatibility the frame-master and bitclock-master +properties can be used as booleans in codec subnode to indicate if the +codec is the dai-link frame or bit clock master. In this case the same +properties should not be present at dai-link level and the +bitclock-inversion and frame-inversion properties should also be placed +in the codec node if needed. Required CPU/CODEC subnodes properties:
@@ -37,29 +63,21 @@ Required CPU/CODEC subnodes properties: Optional CPU/CODEC subnodes properties: -- format : CPU/CODEC specific audio format if needed. - see simple-audio-card,format -- frame-master : bool property. add this if subnode is frame master -- bitclock-master : bool property. add this if subnode is bitclock master -- bitclock-inversion : bool property. add this if subnode has clock inversion -- frame-inversion : bool property. add this if subnode has frame inversion +- dai-tdm-slot-num : Please refer to tdm-slot.txt. +- dai-tdm-slot-width : Please refer to tdm-slot.txt. - clocks / system-clock-frequency : specify subnode's clock if needed. it can be specified via "clocks" if system has clock node (= common clock), or "system-clock-frequency" (if system doens't support common clock) -Note: - * For 'format', 'frame-master', 'bitclock-master', 'bitclock-inversion' and - 'frame-inversion', the simple card will use the settings of CODEC for both - CPU and CODEC sides as we need to keep the settings identical for both ends - of the link. - Example 1 - single DAI link: sound { compatible = "simple-audio-card"; simple-audio-card,name = "VF610-Tower-Sound-Card"; simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack",
@@ -69,17 +87,12 @@ sound { "Headphone Jack", "HP_OUT", "External Speaker", "LINE_OUT"; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <8>; - simple-audio-card,cpu { sound-dai = <&sh_fsi2 0>; }; - simple-audio-card,codec { + dailink0_master: simple-audio-card,codec { sound-dai = <&ak4648>; - bitclock-master; - frame-master; clocks = <&osc>; }; };
@@ -105,31 +118,31 @@ Example 2 - many DAI links: sound { compatible = "simple-audio-card"; simple-audio-card,name = "Cubox Audio"; - simple-audio-card,format = "i2s"; simple-audio-card,dai-link@0 { /* I2S - HDMI */ - simple-audio-card,cpu { + format = "i2s"; + cpu { sound-dai = <&audio1 0>; }; - simple-audio-card,codec { + codec { sound-dai = <&tda998x 0>; }; }; simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */ - simple-audio-card,cpu { + cpu { sound-dai = <&audio1 1>; }; - simple-audio-card,codec { + codec { sound-dai = <&tda998x 1>; }; }; simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */ - simple-audio-card,cpu { + cpu { sound-dai = <&audio1 1>; }; - simple-audio-card,codec { + codec { sound-dai = <&spdif_codec>; }; };
sound/soc/generic/simple-card.c +139 -98
292 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Re: [PATCH RFC 2/2] ASoC: simple-card: Move dai-link level properties away from dai subnodes
Quoted 49 lines · On Fri, 21 Mar 2014 18:47:23 +0200 Jyri Sarha <[email protected]> wrote:
The properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle.
Signed-off-by Jyri Sarha <[email protected]>--- .../devicetree/bindings/sound/simple-card.txt | 91 ++++---- sound/soc/generic/simple-card.c | 237 ++++++++++++-------- 2 files changed, 191 insertions(+), 137 deletions(-)Documentation/devicetree/bindings/sound/simple-card.txt +10
-7@@ -1,6 +1,6 @@ Simple-Card: -Simple-Card specifies audio DAI connection of SoC <-> codec. +Simple-Card specifies audio DAI connections of SoC <-> codec. Required properties:@@ -8,28 +8,54 @@ Required properties: Optional properties: -- simple-audio-card,name : User specified audio sound card name, one string +- simple-audio-card,name : User specified audio sound card name, +one string property. -- simple-audio-card,format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" - simple-audio-card,widgets : Please refer to widgets.txt. - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. -- dai-tdm-slot-num : Please refer to tdm-slot.txt. -- dai-tdm-slot-width : Please refer to tdm-slot.txt. +Optional subnodes: + +- simple-audio-card,dai-link : Container for dai-link level + properties and the CPU and CODEC + sub-nodes. This container may be + omitted when the card has only one + DAI link. See the examples and the
Documentation/devicetree/bindings/sound/simple-card.txt Required properties: · line 34
Quoted 10 lines
Documentation/devicetree/bindings/sound/simple-card.txt +8
-1+ section bellow. + +Dai-link subnode properties and subnodes: + +If dai-link subnode is omitted and the subnode properties are directly +under "sound"-node the subnode property and subnode names have to be +prefixed with "simple-audio-card,"-prefix. -Required subnodes: +Requred dai-link subnodes:
Typo: 'Required'
Quoted 23 lines
Documentation/devicetree/bindings/sound/simple-card.txt +15
-6-- simple-audio-card,dai-link : container for the CPU and CODEC sub-nodes - This container may be omitted when the - card has only one DAI link. - See the examples. +- cpu : CPU sub-node +- codec : CODEC sub-node -- simple-audio-card,cpu : CPU sub-node -- simple-audio-card,codec : CODEC sub-node +Optional dai-link subnode properties: + +- format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- frame-master : Indicates dai-link frame master. + phandle to a cpu or codec subnode. +- bitclock-master : Indicates dai-link bit clock master. + phandle to a cpu or codec subnode. +- bitclock-inversion : bool property. Add this if the + dai-link uses bit clock inversion. +- frame-inversion : bool property. Add this if the + dai-link uses frame clock inversion.
Documentation/devicetree/bindings/sound/simple-card.txt Required properties: · line 61
Quoted 10 lines
Documentation/devicetree/bindings/sound/simple-card.txt +7
-0+ +For backward compatibility the frame-master and bitclock-master +properties can be used as booleans in codec subnode to indicate if the +codec is the dai-link frame or bit clock master. In this case the same +properties should not be present at dai-link level and the +bitclock-inversion and frame-inversion properties should also be placed +in the codec node if needed. Required CPU/CODEC subnodes properties:
[snip]
sound/soc/generic/simple-card.c line 11
Quoted 9 lines
sound/soc/generic/simple-card.c +1
-0@@ -8,6 +8,7 @@* it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define DEBUG
Should be removed.
Quoted 120 lines
sound/soc/generic/simple-card.c +59
-33#include <linux/clk.h> #include <linux/device.h> #include <linux/module.h> @@ -88,7 +89,6 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd)static int asoc_simple_card_sub_parse_of (struct device_node *np, -unsigned int daifmt,struct asoc_simple_dai *dai,const struct device_node **p_node,const char **name)@@ -117,14 +117,6 @@ asoc_simple_card_sub_parse_of(struct device_node *np,return ret;/* -* bitclock-inversion, frame-inversion -* bitclock-master, frame-master -* and specific "format" if it has -*/ - dai->fmt =snd_soc_of_parse_daifmt (np,NULL ); - dai->fmt |= daifmt; - -/* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock) * or "system-clock-frequency = <xxx>" @@ -151,37 +143,134 @@ asoc_simple_card_sub_parse_of(struct device_node *np,return 0 ; } -static int simple_card_cpu_codec_of (struct device_node *node, -int daifmt, -struct snd_soc_dai_link *dai_link, -struct simple_dai_props *dai_props) +static int simple_card_dai_link_of (struct device_node *node, +struct device *dev, +struct snd_soc_dai_link *dai_link, +struct simple_dai_props *dai_props) { -struct device_node *np; +struct device_node *np =NULL ; +struct device_node *bitclkmaster =NULL ; +struct device_node *framemaster =NULL ; +unsigned int daifmt; +char *name; +char prop[128 ]; +char *prefix ="" ;int ret; -/* CPU sub-node */ - ret = -EINVAL ; - np =of_get_child_by_name (node,"simple-audio-card,cpu" ); -if (np) { - ret =asoc_simple_card_sub_parse_of (np, daifmt, - &dai_props->cpu_dai, - &dai_link->cpu_of_node, - &dai_link->cpu_dai_name); -of_node_put (np); +if (!strcmp ("sound" , node->name)) + prefix ="simple-audio-card," ; + + daifmt =snd_soc_of_parse_daifmt (node, prefix, + &bitclkmaster, &framemaster); + daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK ; + +snprintf (prop,sizeof (prop),"%scpu" , prefix); + np =of_get_child_by_name (node, prop); +if (!np) { + ret = -EINVAL ; +dev_err (dev,"%s: Can't find simple-audio-card,cpu DT node\n" , + __func__); + goto dai_link_of_err; } + + ret =asoc_simple_card_sub_parse_of (np, &dai_props->cpu_dai, + &dai_link->cpu_of_node, + &dai_link->cpu_dai_name);if (ret <0 ) -return ret; + goto dai_link_of_err; + + dai_props->cpu_dai.fmt = daifmt; +switch (((np == bitclkmaster)<<4 )|(np == framemaster)) { +case 0x11 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFS ; +break ; +case 0x10 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFM ; +break ; +case 0x01 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFS ; +break ; +default : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFM ; +break ; + } -/* CODEC sub-node */ - ret = -EINVAL ; - np =of_get_child_by_name (node,"simple-audio-card,codec" ); -if (np) { - ret =asoc_simple_card_sub_parse_of (np, daifmt, - &dai_props->codec_dai, - &dai_link->codec_of_node, - &dai_link->codec_dai_name); -of_node_put (np); +of_node_put (np); +snprintf (prop,sizeof (prop),"%scodec" , prefix); + np =of_get_child_by_name (node, prop); +if (!np) { + ret = -EINVAL ; +dev_err (dev,"%s: Can't find simple-audio-card,codec DT node\n" , + __func__); + goto dai_link_of_err; } + + ret =asoc_simple_card_sub_parse_of (np, &dai_props->codec_dai, + &dai_link->codec_of_node, + &dai_link->codec_dai_name); +if (ret <0 )
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 221
Quoted 10 lines
sound/soc/generic/simple-card.c +10
-0+ goto dai_link_of_err; + +if (!bitclkmaster && !framemaster) { +/* Master setting not found from dai_link level, revert back +to legacy DT parsing and take settings from codec node. */ +dev_dbg (dev,"%s: Revert to legacy daifmt parsing\n" , + __func__); + dai_props->cpu_dai.fmt = dai_props->codec_dai.fmt = +snd_soc_of_parse_daifmt (np,NULL ,NULL ,NULL ) | + (daifmt & ~SND_SOC_DAIFMT_CLOCK_MASK );
We are here each time there is no bitclock-master and no frame-master, i.e. each time for me. It could be simpler to keep the first 'daifmt' instead of parsing again.
Quoted 100 lines
sound/soc/generic/simple-card.c +54
-26+ }else { + dai_props->codec_dai.fmt = daifmt; +switch (((np == bitclkmaster)<<4 )|(np == framemaster)) { +case 0x11 : + dai_props->codec_dai.fmt |=SND_SOC_DAIFMT_CBM_CFM ; +break ; +case 0x10 : + dai_props->codec_dai.fmt |=SND_SOC_DAIFMT_CBM_CFS ; +break ; +case 0x01 : + dai_props->codec_dai.fmt |=SND_SOC_DAIFMT_CBS_CFM ; +break ; +default : + dai_props->codec_dai.fmt |=SND_SOC_DAIFMT_CBS_CFS ; +break ; + } + } + +if (!dai_link->cpu_dai_name || !dai_link->codec_dai_name) { + ret = -EINVAL ; + goto dai_link_of_err; + } + +/* simple-card assumes platform == cpu */ + dai_link->platform_of_node = dai_link->cpu_of_node; + +/* Link name is created from CPU/CODEC dai name */ + name =devm_kzalloc (dev, +strlen (dai_link->cpu_dai_name) + +strlen (dai_link->codec_dai_name) +2 , +GFP_KERNEL ); +sprintf (name,"%s-%s" , dai_link->cpu_dai_name, + dai_link->codec_dai_name); + dai_link->name = dai_link->stream_name = name; + +dev_dbg (dev,"\tname : %s\n" , dai_link->stream_name); +dev_dbg (dev,"\tcpu : %s / %04x / %d\n" , + dai_link->cpu_dai_name, + dai_props->cpu_dai.fmt, + dai_props->cpu_dai.sysclk); +dev_dbg (dev,"\tcodec : %s / %04x / %d\n" , + dai_link->codec_dai_name, + dai_props->codec_dai.fmt, + dai_props->codec_dai.sysclk); + +dai_link_of_err: +if (np) +of_node_put (np); +if (bitclkmaster) +of_node_put (bitclkmaster); +if (framemaster) +of_node_put (framemaster);return ret; }@@ -192,18 +281,11 @@ static int asoc_simple_card_parse_of(struct device_node *node, {struct snd_soc_dai_link *dai_link = priv->snd_card.dai_link;struct simple_dai_props *dai_props = priv->dai_props; -struct device_node *np; -char *name; -unsigned int daifmt;int ret;/* parsing the card name from DT */ snd_soc_of_parse_card_name (&priv->snd_card,"simple-audio-card,name" ); -/* get CPU/CODEC common format via simple-audio-card,format */ - daifmt =snd_soc_of_parse_daifmt (node,"simple-audio-card," ) & - (SND_SOC_DAIFMT_FORMAT_MASK |SND_SOC_DAIFMT_INV_MASK ); -/* off-codec widgets */ if (of_property_read_bool (node,"simple-audio-card,widgets" )) { ret = snd_soc_of_parse_audio_simple_widgets(&priv->snd_card,@@ -220,71 +302,30 @@ static int asoc_simple_card_parse_of(struct device_node *node,return ret; } -/* loop on the DAI links */ - np =NULL ; -for (;;) { -if (multi) { - np =of_get_next_child (node, np); -if (!np) -break ; - } - - ret =simple_card_cpu_codec_of (multi ? np : node, - daifmt, dai_link, dai_props); -if (ret <0 ) - goto err; - -/* -* overwrite cpu_dai->fmt as its DAIFMT_MASTER bit is based on CODEC -* while the other bits should be identical unless buggy SW/HW design. -*/ - dai_props->cpu_dai.fmt = dai_props->codec_dai.fmt; +dev_dbg (dev,"New simple-card: %s\n" , priv->snd_card.name ? + priv->snd_card.name :"" );
sound/soc/generic/simple-card.c static int asoc_simple_card_parse_of(struct device_node *node, · line 314
Quoted 10 lines
sound/soc/generic/simple-card.c +7
-3-if (!dai_link->cpu_dai_name || !dai_link->codec_dai_name) { - ret = -EINVAL ; - goto err; +if (multi) { +struct device_node *np =NULL ; +int i; +for (i =0 ; (np =of_get_next_child (node, np)); i++) { +dev_dbg (dev,"\tlink %d:\n" , i); + ret =simple_card_dai_link_of (np, dev, dai_link + i, + dai_props + i);
I feel that my loop was quicker:
struct device_node *np = NULL;
for (;;) {
np = of_get_next_child(node, np);
if (!np)
break;
dev_dbg(dev, "\tlink %d:\n", dai_link - priv->snd_card.dai_link);
ret = simple_card_dai_link_of(np, dev, dai_link++,
dai_props++);sound/soc/generic/simple-card.c static int asoc_simple_card_parse_of(struct device_node *node, · line 317
Quoted 3 lines
sound/soc/generic/simple-card.c +3
-0+of_node_put (np); +if (ret <0 ) +return ret;
The np reference count is updated in of_get_next_child(), so:
if (ret < 0) {
of_node_put(np);
return ret;
}Otherwise, it works for me.
Quoted 50 lines
sound/soc/generic/simple-card.c +5
-36} - -/* simple-card assumes platform == cpu */ - dai_link->platform_of_node = dai_link->cpu_of_node; - - name =devm_kzalloc (dev, -strlen (dai_link->cpu_dai_name) + -strlen (dai_link->codec_dai_name) +2 , -GFP_KERNEL ); -sprintf (name,"%s-%s" , dai_link->cpu_dai_name, - dai_link->codec_dai_name); - dai_link->name = dai_link->stream_name = name; - -if (!multi) -break ; - - dai_link++; - dai_props++; + }else { + ret =simple_card_dai_link_of (node, dev, dai_link, dai_props); +if (ret <0 ) +return ret; } -/* card name is created from CPU/CODEC dai name */ - dai_link = priv->snd_card.dai_link;if (!priv->snd_card.name) - priv->snd_card.name = dai_link->name; - -dev_dbg (dev,"card-name : %s\n" , priv->snd_card.name); -dev_dbg (dev,"platform : %04x\n" , daifmt); - dai_props = priv->dai_props; -dev_dbg (dev,"cpu : %s / %04x / %d\n" , - dai_link->cpu_dai_name, - dai_props->cpu_dai.fmt, - dai_props->cpu_dai.sysclk); -dev_dbg (dev,"codec : %s / %04x / %d\n" , - dai_link->codec_dai_name, - dai_props->codec_dai.fmt, - dai_props->codec_dai.sysclk); + priv->snd_card.name = priv->snd_card.dai_link->name;return 0 ; - -err: -of_node_put (np); -return ret; }/* update the reference count of the devices nodes at end of probe */
Signature · 6 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Re: [PATCH RFC 2/2] ASoC: simple-card: Move dai-link level properties away from dai subnodes
Quoted 11 lines · Jean-Francois Moine
Quoted 8 lines · On Fri, 21 Mar 2014 18:47:23 +0200 Jyri Sarha <[email protected]> wrote:
The properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle.
Signed-off-by Jyri Sarha <[email protected]>---
[...]
Quoted 5 lines
Documentation/devicetree/bindings/sound/simple-card.txt Required properties: · line 34
Quoted 2 lines
Documentation/devicetree/bindings/sound/simple-card.txt +1
-1-Required subnodes: +Requred dai-link subnodes:Typo: 'Required'
Fixed. Thanks!
[...]
Quoted 10 lines
sound/soc/generic/simple-card.c line 11
Quoted 7 lines
sound/soc/generic/simple-card.c +1
-0@@ -8,6 +8,7 @@* it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define DEBUG Should be removed.
Removed. Thanks!
[...]
Quoted 4 lines
Quoted 4 lines
sound/soc/generic/simple-card.c +4
-0+if (!bitclkmaster && !framemaster) { +/* Master setting not found from dai_link level, revert back +to legacy DT parsing and take settings from codec node. */ + dev_dbg(dev, "%s: Revert to legacy daifmt parsing\n",
Quoted 9 lines
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 221
Quoted 4 lines
sound/soc/generic/simple-card.c +4
-0+ __func__); + dai_props->cpu_dai.fmt = dai_props->codec_dai.fmt = +snd_soc_of_parse_daifmt (np,NULL ,NULL ,NULL ) | + (daifmt & ~SND_SOC_DAIFMT_CLOCK_MASK );We are here each time there is no bitclock-master and no frame-master, i.e. each time for me. It could be simpler to keep the first 'daifmt' instead of parsing again.
Sorry, I missed this and comments bellow first time around. I'll make another patch set shortly.
Adding another check to test if we are parsing top level sound node would save you from the legacy mode parsing. I'll do that and update the DT binding document accordingly.
[...]
Quoted 10 lines
sound/soc/generic/simple-card.c static int asoc_simple_card_parse_of(struct device_node *node, · line 314
Quoted 7 lines
sound/soc/generic/simple-card.c +7
-0+if (multi) { +struct device_node *np =NULL ; +int i; +for (i =0 ; (np =of_get_next_child (node, np)); i++) { +dev_dbg (dev,"\tlink %d:\n" , i); + ret =simple_card_dai_link_of (np, dev, dai_link + i, + dai_props + i);I feel that my loop was quicker:
I was targeting for readability rather than speed. I doubt the difference is significant since most string processing is anyway taking most of the time anyway.
Quoted 17 lines
struct device_node *np = NULL; for (;;) { np = of_get_next_child(node, np); if (!np) break; dev_dbg(dev, "\tlink %d:\n", dai_link - priv->snd_card.dai_link); ret = simple_card_dai_link_of(np, dev, dai_link++, dai_props++);sound/soc/generic/simple-card.c static int asoc_simple_card_parse_of(struct device_node *node, · line 317
Quoted 3 lines
sound/soc/generic/simple-card.c +3
-0+of_node_put (np); +if (ret <0 ) +return ret;The np reference count is updated in
of_get_next_child(), so:
Quoted 5 lines
if (ret < 0) {
of_node_put(np);
return ret;
}Oops, need to fix that. Thanks !
Quoted 4 lines
Otherwise, it works for me.
Tested-by Jean-Francois Moine <[email protected]>
Best regards,
Jyri
Re: [alsa-devel] [PATCH RFC 2/2] ASoC: simple-card: Move dai-link level properties away from dai subnodes
In reply to Jyri SarhaHi Jyri
Quoted 8 lines
The properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle.
Signed-off-by Jyri Sarha <[email protected]>---
(snip)
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 122
Quoted 12 lines
sound/soc/generic/simple-card.c +0
-8/* -* bitclock-inversion, frame-inversion -* bitclock-master, frame-master -* and specific "format" if it has -*/ - dai->fmt =snd_soc_of_parse_daifmt (np,NULL ); - dai->fmt |= daifmt; - -/* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock) * or "system-clock-frequency = <xxx>"
[1/2] patch exchanged snd_soc_of_parse_daifmt() parameter, but, user code exchanged in [2/2].
It breaks git-bisect.
Quoted 5 lines
sound/soc/generic/simple-card.c +5
-0+ dai_props->cpu_dai.fmt = daifmt; +switch (((np == bitclkmaster)<<4 )|(np == framemaster)) { +case 0x11 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFS ; +break ;
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 196
Quoted 10 lines
sound/soc/generic/simple-card.c +10
-0+case 0x10 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFM ; +break ; +case 0x01 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFS ; +break ; +default : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFM ; +break ; + }
The user of snd_soc_of_parse_daifmt() is only simple-card (?) I think SND_SOC_DAIFMT_CBxx_CFx cared by snd_soc_of_parse_daifmt() somehow is very reasonable.
Best regards
---
Kuninori Morimoto
Re: [alsa-devel] [PATCH RFC 2/2] ASoC: simple-card: Move dai-link level properties away from dai subnodes
Quoted 12 lines · Kuninori Morimoto
Hi Jyri
Quoted 8 lines
The properties like format, bitclock-master, frame-master, bitclock-inversion, and frame-inversion should be common to the dais connected with a dai-link. For bitclock-master and frame-master properties to be unambiguous they need to indicate the mastering dai node with a phandle.
Signed-off-by Jyri Sarha <[email protected]>---
(snip)
Quoted 17 lines
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 122
Quoted 12 lines
/*
sound/soc/generic/simple-card.c +0
-8-* bitclock-inversion, frame-inversion -* bitclock-master, frame-master -* and specific "format" if it has -*/ - dai->fmt =snd_soc_of_parse_daifmt (np,NULL ); - dai->fmt |= daifmt; - -/* * dai->sysclk come from * "clocks = <&xxx>" (if system has common clock) * or "system-clock-frequency = <xxx>" [1/2] patch exchanged
snd_soc_of_parse_daifmt()parameter, but, user code exchanged in [2/2].
It breaks git-bisect.
Fixed that. Thanks!
Quoted 11 lines
Quoted 11 lines
sound/soc/generic/simple-card.c +11
-0+ dai_props->cpu_dai.fmt = daifmt; +switch (((np == bitclkmaster)<<4 )|(np == framemaster)) { +case 0x11 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFS ; +break ; +case 0x10 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBS_CFM ; +break ; +case 0x01 : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFS ; +break ;
Quoted 9 lines
sound/soc/generic/simple-card.c asoc_simple_card_sub_parse_of(struct device_node *np, · line 196
Quoted 4 lines
sound/soc/generic/simple-card.c +4
-0+default : + dai_props->cpu_dai.fmt |=SND_SOC_DAIFMT_CBM_CFM ; +break ; + }The user of
snd_soc_of_parse_daifmt()is only simple-card (?) I thinkSND_SOC_DAIFMT_CBxx_CFxcared bysnd_soc_of_parse_daifmt()somehow is very reasonable.
Yes, that is what git grep tells me. snd_soc_of_parse_daifmt() can still take care of SND_SOC_DAIFMT_CB?_CF? parsing in simple cases. I just felt that adding the full phandle parsing to the function would break its genericity and make the function parameters hard to understand.
Best regards,
Jyri