vfs fixes
Al Viro
maintainer Several fixes; first 4 commits are obvious fixes (a couple
of fdget_pos()-related ones from Eric Biggers, prepend_name() fix, missing checks for false negatives from __lookup_mnt() in fs/namei.c), followed by 4 commits dealing with the bug found by Max last week - switch of mnt_hash to hlist, to avoid the fun with non-terminating __lookup_mnt(). I'm fairly comfortable with that pile, but whether its second part is OK at this point is up to you; it seems to survive everything I'd thrown at it, and it's quite straightforward. If you really feel that it's too close to -final, well... alternative variant is to replace the last 4 with "if we are spinning too much in __lookup_mnt(), check mount_lock" kludge like the one I've posted early in the "don't clobber mnt_hash.next" thread. I'd rather go for "let's just use hlist", obviously...
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git for-linus
Shortlog:
Al Viro (6):
make prepend_name() work correctly when called with negative *buflen
rcuwalk: recheck mount_lock after mountpoint crossing attempts resizable namespace.c hashes
keep shadowed vfsmounts together
don't bother with propagate_mnt() unless the target is shared switch mnt_hash to hlist
Eric Biggers (2):
vfs: atomic f_pos access in llseek()
vfs: Don't let __fdget_pos() get FMODE_PATH files
Diffstat:
fs/dcache.c | 4 +- fs/file.c | 19 ++---- fs/mount.h | 4 +- fs/namei.c | 29 ++++----- fs/namespace.c | 177 ++++++++++++++++++++++++++++++++++++------------------- fs/pnode.c | 26 ++++---- fs/pnode.h | 4 +- fs/read_write.c | 4 +- 8 files changed, 155 insertions(+), 112 deletions(-)
Quoted 29 lines · Al Viro
Several fixes; first 4 commits are obvious fixes (a couple
of fdget_pos()-related ones from Eric Biggers,prepend_name()fix, missing checks for false negatives from__lookup_mnt()infs/namei.c), followed by 4 commits dealing with the bug found by Max last week - switch ofmnt_hashto hlist, to avoid the fun with non-terminating__lookup_mnt(). I'm fairly comfortable with that pile, but whether its second part is OK at this point is up to you; it seems to survive everything I'd thrown at it, and it's quite straightforward. If you really feel that it's too close to -final, well... alternative variant is to replace the last 4 with "if we are spinning too much in__lookup_mnt(), checkmount_lock" kludge like the one I've posted early in the "don't clobber mnt_hash.next" thread. I'd rather go for "let's just use hlist", obviously...
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.gitfor-linusShortlog:
Al Viro (6):
makeprepend_name()work correctly when called with negative *buflen
rcuwalk: recheckmount_lockafter mountpoint crossing attempts resizablenamespace.chashes
keep shadowed vfsmounts together
don't bother withpropagate_mnt()unless the target is shared switchmnt_hashto hlistEric Biggers (2):
vfs: atomicf_posaccess inllseek()
vfs: Don't let__fdget_pos()getFMODE_PATHfilesDiffstat:
Quoted 10 lines
fs/dcache.c | 4 +- fs/file.c | 19 ++---- fs/mount.h | 4 +- fs/namei.c | 29 ++++----- fs/namespace.c | 177 ++++++++++++++++++++++++++++++++++++------------------- fs/pnode.c | 26 ++++---- fs/pnode.h | 4 +- fs/read_write.c | 4 +- 8 files changed, 155 insertions(+), 112 deletions(-)
Your branch on top of Linux v3.14-rc7-66-g774868c7094d is freezing my Ubuntu/precise AMD64 (WUBI) system when running LTP.
$ cat /opt/ltp/Version 20140115
Vanilla unmodified Linux v3.14-rc7-66-g774868c7094d is OK here.
Dunno how and with which apps you tested, but please verify on your own with latest LTP release.
My kernel-config and dmesg are attached.
( I have taken a screenshot of the frozen system if you wanna look at. )
Regards,
- Sedat -
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc7-4-iniza-small ([email protected]@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sun Mar 23 09:24:30 CET 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.upstream root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fc7000, 0x01fc7fff] PGTABLE [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37958000-0x37ca3fff] [ 0.000000] ACPI: RSDP 00000000000f0100 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 00008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 00010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 0083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 000040 [ 0.000000] ACPI: SLIC 00000000daffd000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 000038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 000098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 00003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 00003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 00026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 0000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf9000-0x11fdfcfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86464 r8192 d24128 u262144 [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.upstream root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3939168K/4086000K available (7331K kernel code, 1042K rwdata, 3224K rodata, 1344K init, 1440K bss, 146832K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1596.493 MHz processor [ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.98 BogoMIPS (lpj=6385972) [ 0.000117] pid_max: default: 32768 minimum: 301 [ 0.000163] ACPI: Core revision 20131218 [ 0.006561] ACPI: All ACPI Tables successfully acquired [ 0.022111] Security Framework initialized [ 0.022156] AppArmor: AppArmor initialized [ 0.022192] Yama: becoming mindful. [ 0.022592] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023694] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024182] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024229] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024504] Initializing cgroup subsys memory [ 0.024546] Initializing cgroup subsys devices [ 0.024584] Initializing cgroup subsys freezer [ 0.024621] Initializing cgroup subsys blkio [ 0.024658] Initializing cgroup subsys perf_event [ 0.024697] Initializing cgroup subsys hugetlb [ 0.024759] Disabled fast string operations [ 0.024796] CPU: Physical Processor ID: 0 [ 0.024832] CPU: Processor Core ID: 0 [ 0.024871] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.024871] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.024937] mce: CPU supports 7 MCE banks [ 0.024985] CPU0: Thermal monitoring enabled (TM1) [ 0.025030] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.025030] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.025030] tlb_flushall_shift: 6 [ 0.025211] Freeing SMP alternatives memory: 28K (ffffffff81e56000 - ffffffff81e5d000) [ 0.026514] ftrace: allocating 27722 entries in 109 pages [ 0.042248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082449] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.082562] TSC deadline timer enabled [ 0.085172] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085320] ... version: 3 [ 0.085356] ... bit width: 48 [ 0.085392] ... generic registers: 4 [ 0.085428] ... value mask: 0000ffffffffffff [ 0.085465] ... max period: 0000ffffffffffff [ 0.085503] ... fixed-purpose events: 3 [ 0.085539] ... event mask: 000000070000000f [ 0.086911] x86: Booting SMP configuration: [ 0.086949] .... node #0, CPUs: #1 [ 0.098036] Disabled fast string operations [ 0.100276] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.100528] #2 [ 0.111577] Disabled fast string operations [ 0.113826] #3<6>[ 0.124941] Disabled fast string operations [ 0.127072] x86: Booted up 1 node, 4 CPUs [ 0.127149] smpboot: Total of 4 processors activated (12771.94 BogoMIPS) [ 0.131025] devtmpfs: initialized [ 0.133848] EVM: security.selinux [ 0.133885] EVM: security.SMACK64 [ 0.133919] EVM: security.capability [ 0.134007] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.135081] regulator-dummy: no parameters [ 0.135180] NET: Registered protocol family 16 [ 0.135354] cpuidle: using governor ladder [ 0.135390] cpuidle: using governor menu [ 0.135465] ACPI: bus type PCI registered [ 0.135583] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.135642] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.142390] PCI: Using configuration type 1 for base access [ 0.144043] bio: create slab <bio-0> at 0 [ 0.144250] ACPI: Added _OSI(Module Device) [ 0.144288] ACPI: Added _OSI(Processor Device) [ 0.144325] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.144362] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174847] ACPI: Executed 1 blocks of module-level executable AML code [ 0.177923] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.188300] ACPI: SSDT 00000000dae70718 000688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.188837] ACPI: Dynamic OEM Table Load: [ 0.188907] ACPI: SSDT (null) 000688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.203126] ACPI: SSDT 00000000dae71a98 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.203701] ACPI: Dynamic OEM Table Load: [ 0.203770] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.215251] ACPI: SSDT 00000000dae6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.215778] ACPI: Dynamic OEM Table Load: [ 0.215847] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.232472] ACPI: Interpreter enabled [ 0.232520] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.232624] ACPI: (supports S0 S1 S3 S4 S5) [ 0.232661] ACPI: Using IOAPIC for interrupt routing [ 0.232731] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.232963] ACPI: No dock devices found. [ 0.253584] ACPI: Power Resource [FN00] (off) [ 0.253736] ACPI: Power Resource [FN01] (off) [ 0.253883] ACPI: Power Resource [FN02] (off) [ 0.254030] ACPI: Power Resource [FN03] (off) [ 0.254175] ACPI: Power Resource [FN04] (off) [ 0.254918] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.254962] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.255215] \_SB_.PCI0:_OSC invalid UUID [ 0.255217] _OSC request data:1 1f 0 [ 0.255221] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.255795] PCI host bridge to bus 0000:00 [ 0.255834] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.255873] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.255914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.255954] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.255996] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.256038] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.256087] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.256198] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.256211] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.256218] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.256224] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.256359] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.256385] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.256469] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.256583] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.256607] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.256707] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.256809] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.256829] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.256913] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.256967] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.257055] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.257146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.257201] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.257292] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.257382] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.257438] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.257524] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.257612] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.257722] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.257746] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.257846] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.257946] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.258148] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.258170] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.258180] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.258190] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.258200] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.258209] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.258219] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.258271] pci 0000:00:1f.2: PME# supported from D3hot [ 0.258363] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.258381] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.258404] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.258729] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.258910] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.259687] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.259843] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.267246] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.267290] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.267441] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.267511] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.267634] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.267709] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.268114] pci 0000:02:00.0: supports D1 D2 [ 0.268116] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.268236] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.275177] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.275239] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.275249] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.275347] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.275385] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.275598] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.283150] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.283226] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.283738] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.284038] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.284382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.284677] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.284972] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.285298] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.285640] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.285935] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.286523] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.286641] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.286933] ACPI : EC: 0 stale EC events cleared [ 0.287145] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.287204] vgaarb: loaded [ 0.287237] vgaarb: bridge control possible 0000:00:02.0 [ 0.287539] SCSI subsystem initialized [ 0.287638] libata version 3.00 loaded. [ 0.287667] ACPI: bus type USB registered [ 0.287727] usbcore: registered new interface driver usbfs [ 0.287778] usbcore: registered new interface driver hub [ 0.287844] usbcore: registered new device driver usb [ 0.288013] PCI: Using ACPI for IRQ routing [ 0.289714] PCI: pci_cache_line_size set to 64 bytes [ 0.289822] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.289824] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.289826] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.289828] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.289948] NetLabel: Initializing [ 0.289983] NetLabel: domain hash size = 128 [ 0.290019] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.290069] NetLabel: unlabeled traffic allowed by default [ 0.290168] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.290357] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.292421] Switched to clocksource hpet [ 0.299936] AppArmor: AppArmor Filesystem Enabled [ 0.300001] pnp: PnP ACPI init [ 0.300050] ACPI: bus type PNP registered [ 0.300467] pnp 00:00: [dma 4] [ 0.300497] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.300527] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.300635] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.300674] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.300730] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.300772] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.300812] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.300853] system 00:04: [io 0xffff] has been reserved [ 0.300892] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.300934] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.300974] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.301014] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.301056] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.301096] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.301138] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301170] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.301229] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.301270] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.301309] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.301365] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.301552] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.301594] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.301636] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.301678] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.301720] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.301762] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.301804] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.301846] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.301888] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.301931] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.301974] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302538] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.302567] pnp: PnP ACPI: found 11 devices [ 0.302603] ACPI: bus type PNP unregistered [ 0.309444] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.309489] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.309539] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.309579] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.309626] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.309686] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.309728] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.309779] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.309781] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.309783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.309785] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.309787] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.309789] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.309791] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.309793] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.309795] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.309860] NET: Registered protocol family 2 [ 0.310087] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.310239] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.310378] TCP: Hash tables configured (established 32768 bind 32768) [ 0.310450] TCP: reno registered [ 0.310493] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.310550] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.310680] NET: Registered protocol family 1 [ 0.310729] pci 0000:00:02.0: Boot video device [ 0.311347] PCI: CLS 64 bytes, default 64 [ 0.311396] Trying to unpack rootfs image as initramfs... [ 0.380869] Freeing initrd memory: 3376K (ffff880037958000 - ffff880037ca4000) [ 0.380929] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.380971] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.381310] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.381418] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.381465] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.381516] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.381565] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.381663] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 0.381736] Scanning for low memory corruption every 60 seconds [ 0.382670] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.382743] Initialise system trusted keyring [ 0.382824] audit: initializing netlink subsys (disabled) [ 0.382880] audit: type=2000 audit(1395566853.364:1): initialized [ 0.414308] bounce pool size: 64 pages [ 0.414357] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.414638] VFS: Disk quotas dquot_6.5.2 [ 0.414699] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.415085] fuse init (API version 7.22) [ 0.415185] msgmni has been set to 7700 [ 0.415654] Key type asymmetric registered [ 0.415692] Asymmetric key parser 'x509' registered [ 0.415748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.415840] io scheduler noop registered [ 0.415878] io scheduler deadline registered (default) [ 0.415934] io scheduler cfq registered [ 0.416413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.416469] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.416589] intel_idle: MWAIT substates: 0x21120 [ 0.416590] intel_idle: v0.4 model 0x2A [ 0.416592] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.417193] ACPI: AC Adapter [ADP1] (on-line) [ 0.417440] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.417707] ACPI: Lid Switch [LID0] [ 0.417800] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.417859] ACPI: Power Button [PWRB] [ 0.417944] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.417999] ACPI: Power Button [PWRF] [ 0.418102] ACPI: Fan [FAN0] (off) [ 0.418169] ACPI: Fan [FAN1] (off) [ 0.418235] ACPI: Fan [FAN2] (off) [ 0.418299] ACPI: Fan [FAN3] (off) [ 0.418366] ACPI: Fan [FAN4] (off) [ 0.419446] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.419487] ACPI: Thermal Zone [TZ00] (65 C) [ 0.419761] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.419801] ACPI: Thermal Zone [TZ01] (30 C) [ 0.419869] GHES: HEST is not enabled! [ 0.419999] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.423671] Linux agpgart interface v0.103 [ 0.425610] brd: module loaded [ 0.426398] ACPI: Battery Slot [BAT1] (battery present) [ 0.426609] loop: module loaded [ 0.426829] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.429765] ahci 0000:00:1f.2: version 3.0 [ 0.429882] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.429915] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.444351] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.444407] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.469142] scsi0 : ahci [ 0.469479] scsi1 : ahci [ 0.469713] scsi2 : ahci [ 0.469933] scsi3 : ahci [ 0.470109] scsi4 : ahci [ 0.470287] scsi5 : ahci [ 0.470377] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.470430] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.470481] ata3: DUMMY [ 0.470514] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.470567] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.470618] ata6: DUMMY [ 0.471094] libphy: Fixed MDIO Bus: probed [ 0.471258] tun: Universal TUN/TAP device driver, 1.6 [ 0.471295] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.471406] PPP generic driver version 2.4.2 [ 0.471494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.471535] ehci-pci: EHCI PCI platform driver [ 0.471728] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.471771] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.471839] ehci-pci 0000:00:1a.0: debug port 2 [ 0.475782] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.475801] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.484306] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.484386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.484428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.484481] usb usb1: Product: EHCI Host Controller [ 0.484519] usb usb1: Manufacturer: Linux 3.14.0-rc7-4-iniza-small ehci_hcd [ 0.484560] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.484740] hub 1-0:1.0: USB hub found [ 0.484784] hub 1-0:1.0: 2 ports detected [ 0.485034] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.485077] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.485144] ehci-pci 0000:00:1d.0: debug port 2 [ 0.489076] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.489093] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.500289] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.500362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.500404] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.500457] usb usb2: Product: EHCI Host Controller [ 0.500494] usb usb2: Manufacturer: Linux 3.14.0-rc7-4-iniza-small ehci_hcd [ 0.500535] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.500703] hub 2-0:1.0: USB hub found [ 0.500745] hub 2-0:1.0: 2 ports detected [ 0.500889] ehci-platform: EHCI generic platform driver [ 0.500936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.500981] ohci-pci: OHCI PCI platform driver [ 0.501028] ohci-platform: OHCI generic platform driver [ 0.501073] uhci_hcd: USB Universal Host Controller Interface driver [ 0.501216] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.501258] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.511023] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.511029] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.511035] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.511041] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.511046] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.511187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.511228] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.511282] usb usb3: Product: xHCI Host Controller [ 0.511320] usb usb3: Manufacturer: Linux 3.14.0-rc7-4-iniza-small xhci_hcd [ 0.511361] usb usb3: SerialNumber: 0000:03:00.0 [ 0.511525] hub 3-0:1.0: USB hub found [ 0.511571] hub 3-0:1.0: 2 ports detected [ 0.511705] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.511745] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.511857] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.511898] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.511951] usb usb4: Product: xHCI Host Controller [ 0.511989] usb usb4: Manufacturer: Linux 3.14.0-rc7-4-iniza-small xhci_hcd [ 0.512030] usb usb4: SerialNumber: 0000:03:00.0 [ 0.512185] hub 4-0:1.0: USB hub found [ 0.512231] hub 4-0:1.0: 2 ports detected [ 0.512423] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.518748] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.518790] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.518980] mousedev: PS/2 mouse device common for all mice [ 0.519368] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.519438] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.519533] device-mapper: uevent: version 1.0.3 [ 0.519635] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected] [ 0.519696] Intel P-state driver initializing. [ 0.519741] Intel pstate controlling: cpu 0 [ 0.519801] Intel pstate controlling: cpu 1 [ 0.519863] Intel pstate controlling: cpu 2 [ 0.519912] Intel pstate controlling: cpu 3 [ 0.519981] ledtrig-cpu: registered to indicate activity on CPUs [ 0.520240] ashmem: initialized [ 0.520405] TCP: cubic registered [ 0.520533] NET: Registered protocol family 10 [ 0.520767] NET: Registered protocol family 17 [ 0.520814] Key type dns_resolver registered [ 0.521149] Loading compiled-in X.509 certificates [ 0.522258] Loaded X.509 cert 'Magrathea: Glacier signing key: 85f5eebb1283fe0f9148fd35a674ea6dad1752c5' [ 0.522328] registered taskstats version 1 [ 0.525075] Key type trusted registered [ 0.526998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.527531] Key type encrypted registered [ 0.529986] AppArmor: AppArmor sha1 policy hashing enabled [ 0.530347] regulator-dummy: disabling [ 0.530515] rtc_cmos 00:05: setting system clock to 2014-03-23 09:27:34 UTC (1395566854) [ 0.530642] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.530682] EDD information not available. [ 0.788207] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.789380] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.789461] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.790765] ata1.00: configured for UDMA/133 [ 0.791087] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.791332] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.791346] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.791463] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.791614] sd 0:0:0:0: [sda] Write Protect is off [ 0.791662] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.791751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.796097] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.809722] sda: sda1 sda2 sda3 [ 0.810503] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.928610] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.928670] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.929714] hub 1-1:1.0: USB hub found [ 0.929881] hub 1-1:1.0: 6 ports detected [ 1.040108] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.107980] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.108617] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.108674] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.109384] ata2.00: configured for UDMA/133 [ 1.109678] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.109930] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.109950] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.110105] sd 1:0:0:0: [sdb] Write Protect is off [ 1.110161] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.110213] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.111113] sdb: sdb1 sdb2 [ 1.111510] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.172135] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.172178] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.172413] hub 2-1:1.0: USB hub found [ 1.172508] hub 2-1:1.0: 6 ports detected [ 1.287176] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.299973] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.300552] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.300592] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.300634] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.300671] usb 4-1: Manufacturer: MEDION [ 1.300708] usb 4-1: SerialNumber: 3180000000000000092C [ 1.371750] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.379664] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.427658] ata4: SATA link down (SStatus 0 SControl 300) [ 1.623309] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.623349] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.623401] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.623437] usb 1-1.4: Manufacturer: 123 [ 1.747427] ata5: SATA link down (SStatus 0 SControl 300) [ 1.748708] Freeing unused kernel memory: 1344K (ffffffff81d06000 - ffffffff81e56000) [ 1.748762] Write protecting the kernel read-only data: 12288k [ 1.751029] Freeing unused kernel memory: 848K (ffff88000172c000 - ffff880001800000) [ 1.753284] Freeing unused kernel memory: 872K (ffff880001b26000 - ffff880001c00000) [ 1.771251] udevd[127]: starting version 175 [ 1.836112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.836174] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.836690] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.836982] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000e000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.837055] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.851594] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.853084] usb-storage 4-1:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 1.853169] scsi6 : usb-storage 4-1:1.0 [ 1.853323] usbcore: registered new interface driver usb-storage [ 1.867396] usb 2-1.4: new low-speed USB device number 3 using ehci-pci [ 1.965082] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c00e [ 1.965168] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.965232] usb 2-1.4: Product: USB-PS/2 Optical Mouse [ 1.965270] usb 2-1.4: Manufacturer: Logitech [ 2.039473] usb 2-1.5: new full-speed USB device number 4 using ehci-pci [ 2.135976] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.136056] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.142841] hidraw: raw HID events driver (C) Jiri Kosina [ 2.148314] usbcore: registered new interface driver usbhid [ 2.148356] usbhid: USB HID core driver [ 2.151495] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C00E.0001/input/input6 [ 2.151706] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4/input0 [ 2.379076] Switched to clocksource tsc [ 2.782797] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 2.850962] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.851353] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.851702] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.851765] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 2.852236] sd 6:0:0:0: [sdc] Write Protect is off [ 2.852279] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.852699] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.854320] sdc: sdc1 sdc2 sdc3 [ 2.855731] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.983956] random: nonblocking pool is initialized [ 4.858482] init: ureadahead main process (339) terminated with status 5 [ 7.521695] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 7.655401] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 7.828230] udevd[627]: starting version 175 [ 8.745447] lp: driver loaded but no devices found [ 10.736880] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 10.736891] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.736896] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 10.736902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.736904] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 10.736909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.736911] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 10.736915] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.736917] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.828234] samsung_laptop: detected SABI interface: SwSmi@ [ 10.828239] samsung_laptop: Backlight controlled by ACPI video driver [ 10.835581] wmi: Mapper loaded [ 11.231063] cfg80211: Calling CRDA to update world regulatory domain [ 11.291487] [drm] Initialized drm 1.1.0 20060810 [ 11.373314] Bluetooth: Core ver 2.18 [ 11.373339] NET: Registered protocol family 31 [ 11.373341] Bluetooth: HCI device and connection manager initialized [ 11.373349] Bluetooth: HCI socket layer initialized [ 11.373351] Bluetooth: L2CAP socket layer initialized [ 11.373362] Bluetooth: SCO socket layer initialized [ 11.635589] usbcore: registered new interface driver btusb [ 11.860767] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 11.860770] Copyright(c) 2003- 2014 Intel Corporation [ 11.860958] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 11.861113] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 11.942332] Linux video capture interface: v2.00 [ 12.199308] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 12.218596] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 12.292677] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 12.766234] [drm] Memory usable by graphics device = 2048M [ 12.819669] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 12.819679] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.819680] [drm] Driver supports precise vblank timestamp query. [ 12.819751] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 12.835791] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 12.835795] [drm] This can cause pipe underruns and display issues. [ 12.835797] [drm] Please upgrade your BIOS to fix this. [ 12.849517] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 12.849885] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 12.853445] fbcon: inteldrmfb (fb0) is primary device [ 12.856230] cfg80211: World regulatory domain updated: [ 12.856232] cfg80211: DFS Master region: unset [ 12.856232] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.856233] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.856234] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.856235] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.856236] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.856236] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.868745] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8 [ 12.868834] usbcore: registered new interface driver uvcvideo [ 12.868835] USB Video Class driver (1.1.1) [ 13.187393] audit: type=1400 audit(1395563267.164:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=919 comm="apparmor_parser" [ 13.187398] audit: type=1400 audit(1395563267.164:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser" [ 13.187400] audit: type=1400 audit(1395563267.164:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser" [ 13.187426] audit: type=1400 audit(1395563267.164:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=880 comm="apparmor_parser" [ 13.187431] audit: type=1400 audit(1395563267.164:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser" [ 13.187434] audit: type=1400 audit(1395563267.164:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser" [ 13.188161] audit: type=1400 audit(1395563267.164:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=880 comm="apparmor_parser" [ 13.188166] audit: type=1400 audit(1395563267.164:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=880 comm="apparmor_parser" [ 13.188176] audit: type=1400 audit(1395563267.164:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser" [ 13.188182] audit: type=1400 audit(1395563267.164:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser" [ 13.893322] Console: switching to colour frame buffer device 170x48 [ 13.895645] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 13.895646] i915 0000:00:02.0: registered panic notifier [ 13.907591] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.907887] acpi device:33: registered as cooling_device9 [ 13.907981] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 13.908085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.908308] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 14.580341] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.580459] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.580563] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.774087] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 14.774093] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 14.774096] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 14.774100] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 14.774250] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.830496] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 14.957064] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.963856] ppdev: user-space parallel port driver [ 15.302492] Bluetooth: RFCOMM TTY layer initialized [ 15.302505] Bluetooth: RFCOMM socket layer initialized [ 15.302512] Bluetooth: RFCOMM ver 1.11 [ 15.430771] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.430776] Bluetooth: BNEP filters: protocol multicast [ 15.430787] Bluetooth: BNEP socket layer initialized [ 15.698030] init: failsafe main process (1029) killed by TERM signal [ 20.116530] r8169 0000:02:00.0 eth0: link down [ 20.116560] r8169 0000:02:00.0 eth0: link down [ 20.116589] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.859616] r8169 0000:02:00.0 eth0: link up [ 22.859626] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 47.599684] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 47.611971] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 56.003427] usb 2-1.5: USB disconnect, device number 4
Al Viro
maintainerQuoted 2 lines · Sedat Dilek
Your branch on top of Linux v3.14-rc7-66-g774868c7094d is freezing my Ubuntu/precise AMD64 (WUBI) system when running LTP.
Which test?
Al Viro
maintainerQuoted 6 lines · Al Viro
Quoted 2 lines · Sedat Dilek
Your branch on top of Linux v3.14-rc7-66-g774868c7094d is freezing my Ubuntu/precise AMD64 (WUBI) system when running LTP.
Which test?
Argh... I see what's going on; could you check if the following fixes all the problems you are seeing?
fs/namespace.c +2 -2
@@ -746,7 +746,7 @@ static void detach_mnt(struct mount *mnt, struct path *old_path) mnt->mnt_parent = mnt; mnt->mnt_mountpoint = mnt->mnt.mnt_root;list_del_init (&mnt->mnt_child); -hlist_del_rcu (&mnt->mnt_hash); +hlist_del_init_rcu (&mnt->mnt_hash);put_mountpoint (mnt->mnt_mp); mnt->mnt_mp =NULL ; }
@@ -1236,7 +1236,7 @@ void umount_tree(struct mount *mnt, int how)struct mount *last =NULL ;for (p = mnt; p; p =next_mnt (p, mnt)) { -hlist_del_rcu (&p->mnt_hash); +hlist_del_init_rcu (&p->mnt_hash);hlist_add_head (&p->mnt_hash, &tmp_list); }
fs/pnode.c +1 -1
@@ -341,7 +341,7 @@ static void __propagate_umount(struct mount *mnt)* other children */ if (child &&list_empty (&child->mnt_mounts)) { -hlist_del_rcu (&child->mnt_hash); +hlist_del_init_rcu (&child->mnt_hash);hlist_add_before_rcu (&child->mnt_hash, &mnt->mnt_hash); } }
Quoted 3 lines · Al Viro
Several fixes; first 4 commits are obvious fixes (a couple
of fdget_pos()-related ones from Eric Biggers,prepend_name()fix, missing checks for false negatives from__lookup_mnt()infs/namei.c)
I'm not seeing the obvious fix in the prepend_name() thing, and I think it's horrible to *update* the name-len to negative like it now does.
Why is anybody calling it with a negative buffer length in the first place? *That* is the bug. Making the buflen become negative just makes the bug worse, imnsho.
So I'm not pulling this, since the obvious fixes don't all look obvious to me, and Sedat reports there are problems with it.
Linus
Al Viro
maintainerQuoted 5 lines · Linus Torvalds
Quoted 3 lines · Al Viro
Several fixes; first 4 commits are obvious fixes (a couple
of fdget_pos()-related ones from Eric Biggers,prepend_name()fix, missing checks for false negatives from__lookup_mnt()infs/namei.c)
Quoted 7 lines
I'm not seeing the obvious fix in the
prepend_name()thing, and I think it's horrible to *update* the name-len to negative like it now does.Why is anybody calling it with a negative buffer length in the first place? *That* is the bug. Making the buflen become negative just makes the bug worse, imnsho.
It's easier to skip checking the overflow on prepend() of "\0" in the beginning of the whole thing and just let the next operation to fail. That's where the corner case comes from.
Quoted 4 lines · Al Viro
It's easier to skip checking the overflow on
prepend()of "\0" in the beginning of the whole thing and just let the next operation to fail. That's where the corner case comes from.
Ok, I'll buy the first four commits. Let's wait for Sedat's report on the rest.
Linus
Quoted 10 lines · Linus Torvalds
Quoted 4 lines · Al Viro
It's easier to skip checking the overflow on
prepend()of "\0" in the beginning of the whole thing and just let the next operation to fail. That's where the corner case comes from.Ok, I'll buy the first four commits. Let's wait for Sedat's report on the rest.
Linus
Hi,
I have tested w/ Al's patch from [1].
AFAICS this changes are now updated in vfs.git#for-linus branch as
commit 9d25fe7e232b ("switch mnt_hash to hlist").
I had a 2nd trouble w/ the old code, installing a Debian package resulted also in a freeze.
This now works.
The LTP test is still running... and my -5 kernel with Al's fix seems to hit the 700+ KiB barrier in my logs.
$ LC_ALL=C ls -l /opt/ltp/runltp-log_3.14.0-rc7-[0-9]*-iniza-small.txt -rw-r--r-- 1 root root 733184 Mar 23 09:51 /opt/ltp/runltp-log_3.14.0-rc7-4-iniza-small.txt -rw-r--r-- 1 root root 822533 Mar 24 09:51 /opt/ltp/runltp-log_3.14.0-rc7-5-iniza-small.txt -rw-r--r-- 1 root root 1142248 Mar 23 11:44 /opt/ltp/runltp-log_3.14.0-rc7-66-iniza-small.txt
[ NOTE ]
-66: vanilla Linus-tree
-4: -66 plus old vfs-fixes
-5: -66 plus old vfs-fixes plus Al's fix from [1]
If you like give the usual credits.
Regards,
- Sedat -
P.S.: [Off-topic] With vanilla -66 kernel I have some OOPS in the oom[1..5] tests of LTP. Whom to adress? mm-folks?
Just to clarify: the current vfs tree from Al works for you, no new issues?
I was delaying the release first a day, and now I think I'll just do an rc8 after all (and do the final 3.14 next weekend), but I'd like to be sure what the status of Al's tree is.
Al, can you send a new pull request with fixed information (assuming I understood correctly and everything in vfs-land works for Sedat).
Quoted 2 lines
P.S.: [Off-topic] With vanilla -66 kernel I have some OOPS in the oom[1..5] tests of LTP. Whom to adress? mm-folks?
Yes, please send to -mm (and cc lkml and me).
Linus
Quoted 9 lines · Linus Torvalds
Just to clarify: the current vfs tree from Al works for you, no new issues?
I was delaying the release first a day, and now I think I'll just do an rc8 after all (and do the final 3.14 next weekend), but I'd like to be sure what the status of Al's tree is.
Al, can you send a new pull request with fixed information (assuming I understood correctly and everything in vfs-land works for Sedat).
Looking at [1] you did not pull-in the new changes. Are you waiting for a new pull-request?
- Sedat -
Quoted 6 lines
Quoted 2 lines
P.S.: [Off-topic] With vanilla -66 kernel I have some OOPS in the oom[1..5] tests of LTP. Whom to adress? mm-folks?Yes, please send to -mm (and cc lkml and me).
Linus
Quoted 3 lines · Sedat Dilek
Looking at [1] you did not pull-in the new changes. Are you waiting for a new pull-request?
Yeah, with the top commit updated, I'd like to make sure I get the right pull.
Linus
Quoted 7 lines · Linus Torvalds
Quoted 3 lines · Sedat Dilek
Looking at [1] you did not pull-in the new changes. Are you waiting for a new pull-request?
Yeah, with the top commit updated, I'd like to make sure I get the right pull.
AFAICS, it was a typo...
s/hlist_del_rcu()/hlist_del_init_rcu()
- Sedat -
Al Viro
maintainerQuoted 6 lines · Linus Torvalds
Quoted 3 lines · Sedat Dilek
Looking at [1] you did not pull-in the new changes. Are you waiting for a new pull-request?
Yeah, with the top commit updated, I'd like to make sure I get the right pull.
Will do in a few. Sorry about delay (and even more about the reasons for it - the lack of sleep from redeye flight was to be expected, of course, but catching stomach flu was not ;-/)
Al, finally back to life and digging himself from under ~5e3 mails in l-k mailbox...
Al Viro
maintainerQuoted 2 lines · Al Viro
Al, finally back to life and digging himself from under ~5e3 mails in l-k mailbox...
Several fixes; a couple of fdget_pos()-related ones from Eric Biggers,prepend_name() fix (bug was reported by many people, Imre and Jan being the ones I'd been able to find addresses of), plus a series of fixes for bug found by Max Kellermann - missing checks for false negatives from __lookup_mnt() in fs/namei.c + switching mnt_hash to hlist, turning the races between __lookup_mnt() and hash modifications into false negatives from __lookup_mnt() (instead of hangs).
Please, pull from the usual place -git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git for-linus
Commit ID of that branch should be 7fc5aaa083922420e2dec5d985420cb5f959b1ce; diffs are the same as what sat there since last Sunday, commit messages got updated a bit. Should've propagated by now...
Shortlog:
Al Viro (6):
make prepend_name() work correctly when called with negative *buflen
rcuwalk: recheck mount_lock after mountpoint crossing attempts resizable namespace.c hashes
keep shadowed vfsmounts together
don't bother with propagate_mnt() unless the target is shared switch mnt_hash to hlist
Eric Biggers (2):
vfs: atomic f_pos access in llseek()
vfs: Don't let __fdget_pos() get FMODE_PATH files
Diffstat:
fs/dcache.c | 4 +- fs/file.c | 19 ++---- fs/mount.h | 4 +- fs/namei.c | 29 ++++----- fs/namespace.c | 177 ++++++++++++++++++++++++++++++++++++------------------- fs/pnode.c | 26 ++++---- fs/pnode.h | 4 +- fs/read_write.c | 4 +- 8 files changed, 155 insertions(+), 112 deletions(-)
Quoted 4 lines · Al Viro
Commit ID of that branch should be
7fc5aaa083922420e2dec5d985420cb5f959b1ce; diffs are the same as what sat there since last Sunday, commit messages got updated a bit.
Ugh. You have apparently rebased the parts that I already pulled too, which is annoying and causes duplicate commits.
Linus
Al Viro
maintainerQuoted 8 lines · Linus Torvalds
Quoted 4 lines · Al Viro
Commit ID of that branch should be
7fc5aaa083922420e2dec5d985420cb5f959b1ce; diffs are the same as what sat there since last Sunday, commit messages got updated a bit.Ugh. You have apparently rebased the parts that I already pulled too, which is annoying and causes duplicate commits.
Sorry, I'd only noticed your pull after sending that... Missing commits on top of linux.git#master are in vfs.git#for-linus-2, so if you prefer to grab them from there, it'sgit://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git for-linus-2
Shortlog:
Al Viro (4):
resizable namespace.c hashes
keep shadowed vfsmounts together
don't bother with propagate_mnt() unless the target is shared switch mnt_hash to hlist
Diffstat:
fs/mount.h | 4 +-- fs/namespace.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------- fs/pnode.c | 26 +++++++++------ fs/pnode.h | 4 +-- 4 files changed, 134 insertions(+), 77 deletions(-)