snd-cs8427: separate HW initialization
Subsystems (2)
PATCH 1/2 snd-cs8427: separate HW initialization
Separate HW initialization from device creation.
This is needed for suspend/resume support.
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 19 deletions(-)
include/sound/cs8427.h +1 -0
@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
sound/i2c/cs8427.c +38 -19
87 lines not on this page · raw message
Signature · 1 line
Ondrej Zary
PATCH 2/2 snd-ice1712: Add S/PDIF suspend support for ICE1712-based M-Audio cards
Add S/PDIF suspend support for M-Audio cards based on ICE1712 chip. Tested (playback only) on Audiophile 24/96. Capture will probably not work.
--- sound/pci/ice1712/delta.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
sound/pci/ice1712/delta.c +22 -0
@@ -579,6 +579,28 @@ static struct snd_ak4xxx_private akm_vx442_priv = {static int snd_ice1712_delta_resume (struct snd_ice1712 *ice) {unsigned char akm_backup[AK4XXX_IMAGE_SIZE ]; + +/* init spdif */ +switch (ice->eeprom.subvendor) { +case ICE1712_SUBDEVICE_AUDIOPHILE : +case ICE1712_SUBDEVICE_DELTA410 : +case ICE1712_SUBDEVICE_DELTA1010E : +case ICE1712_SUBDEVICE_DELTA1010LT : +case ICE1712_SUBDEVICE_VX442 : +case ICE1712_SUBDEVICE_DELTA66E : +snd_cs8427_init (ice->i2c, ice->cs8427); +break ; +case ICE1712_SUBDEVICE_DELTA1010 : +case ICE1712_SUBDEVICE_MEDIASTATION : +/* nothing */ +break ; +case ICE1712_SUBDEVICE_DELTADIO2496 : +case ICE1712_SUBDEVICE_DELTA66 : +/* Set spdif defaults */ +snd_ice1712_delta_cs8403_spdif_write (ice, ice->spdif.cs8403_bits); +break ; + } +/* init codec and restore registers */ if (ice->akm_codecs) {memcpy (akm_backup, ice->akm->images,sizeof (akm_backup));
Signature · 1 line
Ondrej Zary
At Wed, 2 Apr 2014 22:35:32 +0200,
Quoted 5 lines · Ondrej Zary
Separate HW initialization from device creation.
This is needed for suspend/resume support.Signed-off-by Ondrej Zary <[email protected]>
Could you make your patch checkpatch-clean?
thanks,
Takashi
Quoted 3 lines
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++--------------
--
Quoted 117 lines
2 files changed, 39 insertions(+), 19 deletions(-)include/sound/cs8427.h +1
-0@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,sound/i2c/cs8427.c +38
-19@@ -150,10 +150,8 @@ static void snd_cs8427_free(struct snd_i2c_device *device)kfree (device->private_data); } -int snd_cs8427_create (struct snd_i2c_bus *bus, -unsigned char addr, -unsigned int reset_timeout, -struct snd_i2c_device **r_cs8427) +int snd_cs8427_init (struct snd_i2c_bus *bus, +struct snd_i2c_device *device) {static unsigned char initvals1[] = {CS8427_REG_CONTROL1 |CS8427_REG_AUTOINC ,@@ -200,22 +198,10 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,Inhibit E->F transfers. */ CS8427_UD | CS8427_EFTUI | CS8427_DETUI, }; +struct cs8427 *chip = device->private_data;int err; -struct cs8427 *chip; -struct snd_i2c_device *device;unsigned char buf[24 ]; -if ((err =snd_i2c_device_create (bus,"CS8427" , -CS8427_ADDR | (addr &7 ), - &device)) <0 ) -return err; - chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); -if (chip ==NULL ) { -snd_i2c_device_free (device); -return -ENOMEM ; - } - device->private_free = snd_cs8427_free; -snd_i2c_lock (bus); err =snd_cs8427_reg_read (device,CS8427_REG_ID_AND_VER );if (err !=CS8427_VER8427A ) {@@ -264,10 +250,44 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,snd_i2c_unlock (bus);/* turn on run bit and rock'n'roll */ +snd_cs8427_reset (device); + +return 0 ; + + __fail: +snd_i2c_unlock (bus); + +return err; +} + +EXPORT_SYMBOL (snd_cs8427_init); + +int snd_cs8427_create (struct snd_i2c_bus *bus, +unsigned char addr, +unsigned int reset_timeout, +struct snd_i2c_device **r_cs8427) +{ +int err; +struct cs8427 *chip; +struct snd_i2c_device *device; + +if ((err =snd_i2c_device_create (bus,"CS8427" , +CS8427_ADDR | (addr &7 ), + &device)) <0 ) +return err; + chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); +if (chip ==NULL ) { +snd_i2c_device_free (device); +return -ENOMEM ; + } + device->private_free = snd_cs8427_free; +if (reset_timeout <1 ) reset_timeout =1 ; chip->reset_timeout = reset_timeout; -snd_cs8427_reset (device); + +if ((err =snd_cs8427_init (bus, device))) + goto __fail;#if 0 // it's nice for read tests {@@ -286,7 +306,6 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,return 0 ; __fail: -snd_i2c_unlock (bus);snd_i2c_device_free (device);return err <0 ? err : -EIO ; }Signature · 6 lines
Ondrej Zary _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH v2 1/1 snd-cs8427: separate HW initialization
In reply to Ondrej ZarySeparate HW initialization from device creation.
This is needed for suspend/resume support.
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 19 deletions(-)
include/sound/cs8427.h +1 -0
@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
sound/i2c/cs8427.c +0 -0
@@ -150,10 +150,8 @@ static void snd_cs8427_free(struct snd_i2c_device
*device)
kfree(device->private_data);
}
-int snd_cs8427_create(struct snd_i2c_bus *bus,
- unsigned char addr, - unsigned int reset_timeout, - struct snd_i2c_device **r_cs8427)
+int snd_cs8427_init(struct snd_i2c_bus *bus,
+ struct snd_i2c_device *device)
{
static unsigned char initvals1[] = {
CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC,
@@ -200,22 +198,10 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,
Inhibit E->F transfers. */
CS8427_UD | CS8427_EFTUI | CS8427_DETUI,
};
+ struct cs8427 *chip = device->private_data;
int err;
- struct cs8427 *chip;
- struct snd_i2c_device *device;
unsigned char buf[24];
- if ((err = snd_i2c_device_create(bus, "CS8427",
- CS8427_ADDR | (addr & 7),
- &device)) < 0)
- return err;
- chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL) {
- snd_i2c_device_free(device);
- return -ENOMEM;
- }
- device->private_free = snd_cs8427_free;
-
snd_i2c_lock(bus);
err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER); if (err != CS8427_VER8427A) {
@@ -264,10 +250,44 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,
snd_i2c_unlock(bus);
/* turn on run bit and rock'n'roll */
+ snd_cs8427_reset(device);
+
+ return 0;
+
+__fail:
+ snd_i2c_unlock(bus);
+
+ return err;
+}
+EXPORT_SYMBOL(snd_cs8427_init);
+
+int snd_cs8427_create(struct snd_i2c_bus *bus,
+ unsigned char addr, + unsigned int reset_timeout, + struct snd_i2c_device **r_cs8427)
+{
+ int err;
+ struct cs8427 *chip;
+ struct snd_i2c_device *device;
+
+ err = snd_i2c_device_create(bus, "CS8427", CS8427_ADDR | (addr & 7),
+ &device);
+ if (err < 0)
+ return err;
+ chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ snd_i2c_device_free(device);
+ return -ENOMEM;
+ }
+ device->private_free = snd_cs8427_free;
+
if (reset_timeout < 1)
reset_timeout = 1;
chip->reset_timeout = reset_timeout;
- snd_cs8427_reset(device);
+
+ err = snd_cs8427_init(bus, device);
+ if (err)
+ goto __fail;
#if 0 // it's nice for read tests
{
@@ -286,7 +306,6 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,
return 0;
__fail:
- snd_i2c_unlock(bus);
snd_i2c_device_free(device);
return err < 0 ? err : -EIO;}
Signature · 1 line
Ondrej Zary
At Thu, 3 Apr 2014 09:13:40 +0200,
Quoted 5 lines · Ondrej Zary
Separate HW initialization from device creation.
This is needed for suspend/resume support.Signed-off-by Ondrej Zary <[email protected]>
The patch isn't applicable due to broken lines. Please fix your MUA and resubmit the patch series.
Also, put maintainers to Cc if you want your patches to be merged. Sending only to ML might miss my inbox accidentally.
thanks,
Takashi
Quoted 121 lines
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 19 deletions(-)include/sound/cs8427.h +1
-0@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,sound/i2c/cs8427.c +2
-4@@ -150,10 +150,8 @@ static void snd_cs8427_free(struct snd_i2c_device *device)kfree (device->private_data); } -int snd_cs8427_create (struct snd_i2c_bus *bus, -unsigned char addr, -unsigned int reset_timeout, -struct snd_i2c_device **r_cs8427) +int snd_cs8427_init (struct snd_i2c_bus *bus, +struct snd_i2c_device *device) {static unsigned char initvals1[] = {sound/i2c/cs8427.c +36
-15CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC,@@ -200,22 +198,10 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,Inhibit E->F transfers. */ CS8427_UD | CS8427_EFTUI | CS8427_DETUI, }; +struct cs8427 *chip = device->private_data;int err; -struct cs8427 *chip; -struct snd_i2c_device *device;unsigned char buf[24 ]; -if ((err =snd_i2c_device_create (bus,"CS8427" , -CS8427_ADDR | (addr &7 ), - &device)) <0 ) -return err; - chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); -if (chip ==NULL ) { -snd_i2c_device_free (device); -return -ENOMEM ; - } - device->private_free = snd_cs8427_free; -snd_i2c_lock (bus); err =snd_cs8427_reg_read (device,CS8427_REG_ID_AND_VER );if (err !=CS8427_VER8427A ) {@@ -264,10 +250,44 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,snd_i2c_unlock (bus);/* turn on run bit and rock'n'roll */ +snd_cs8427_reset (device); + +return 0 ; + +__fail: +snd_i2c_unlock (bus); + +return err; +} +EXPORT_SYMBOL (snd_cs8427_init); + +int snd_cs8427_create (struct snd_i2c_bus *bus, +unsigned char addr, +unsigned int reset_timeout, +struct snd_i2c_device **r_cs8427) +{ +int err; +struct cs8427 *chip; +struct snd_i2c_device *device; + + err =snd_i2c_device_create (bus,"CS8427" ,CS8427_ADDR | (addr &7 ), + &device); +if (err <0 ) +return err; + chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); +if (chip ==NULL ) { +snd_i2c_device_free (device); +return -ENOMEM ; + } + device->private_free = snd_cs8427_free; +if (reset_timeout <1 ) reset_timeout =1 ; chip->reset_timeout = reset_timeout; -snd_cs8427_reset (device); + + err =snd_cs8427_init (bus, device); +if (err) + goto __fail;#if 0 // it's nice for read tests {@@ -286,7 +306,6 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,return 0 ; __fail: -snd_i2c_unlock (bus);snd_i2c_device_free (device);return err <0 ? err : -EIO ; }Signature · 5 lines
Ondrej Zary _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH v2 1/1 snd-cs8427: separate HW initialization
Separate HW initialization from device creation.
This is needed for suspend/resume support.
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 19 deletions(-)
include/sound/cs8427.h +1 -0
@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
sound/i2c/cs8427.c +38 -19
87 lines not on this page · raw message
Signature · 1 line
Ondrej Zary
Takashi Iwai
AppliedAt Thu, 3 Apr 2014 14:49:46 +0200,
Quoted 5 lines · Ondrej Zary
Separate HW initialization from device creation.
This is needed for suspend/resume support.Signed-off-by Ondrej Zary <[email protected]>
Thanks, applied.
Takashi
Quoted 115 lines
--- include/sound/cs8427.h | 1 + sound/i2c/cs8427.c | 57 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 19 deletions(-)include/sound/cs8427.h +1
-0@@ -188,6 +188,7 @@struct snd_pcm_substream ; +int snd_cs8427_init (struct snd_i2c_bus *bus,struct snd_i2c_device *device);int snd_cs8427_create (struct snd_i2c_bus *bus,unsigned char addr,unsigned int reset_timeout,struct snd_i2c_device **r_cs8427); int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,sound/i2c/cs8427.c +38
-19@@ -150,10 +150,8 @@ static void snd_cs8427_free(struct snd_i2c_device *device)kfree (device->private_data); } -int snd_cs8427_create (struct snd_i2c_bus *bus, -unsigned char addr, -unsigned int reset_timeout, -struct snd_i2c_device **r_cs8427) +int snd_cs8427_init (struct snd_i2c_bus *bus, +struct snd_i2c_device *device) {static unsigned char initvals1[] = {CS8427_REG_CONTROL1 |CS8427_REG_AUTOINC ,@@ -200,22 +198,10 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,Inhibit E->F transfers. */ CS8427_UD | CS8427_EFTUI | CS8427_DETUI, }; +struct cs8427 *chip = device->private_data;int err; -struct cs8427 *chip; -struct snd_i2c_device *device;unsigned char buf[24 ]; -if ((err =snd_i2c_device_create (bus,"CS8427" , -CS8427_ADDR | (addr &7 ), - &device)) <0 ) -return err; - chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); -if (chip ==NULL ) { -snd_i2c_device_free (device); -return -ENOMEM ; - } - device->private_free = snd_cs8427_free; -snd_i2c_lock (bus); err =snd_cs8427_reg_read (device,CS8427_REG_ID_AND_VER );if (err !=CS8427_VER8427A ) {@@ -264,10 +250,44 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,snd_i2c_unlock (bus);/* turn on run bit and rock'n'roll */ +snd_cs8427_reset (device); + +return 0 ; + +__fail: +snd_i2c_unlock (bus); + +return err; +} +EXPORT_SYMBOL (snd_cs8427_init); + +int snd_cs8427_create (struct snd_i2c_bus *bus, +unsigned char addr, +unsigned int reset_timeout, +struct snd_i2c_device **r_cs8427) +{ +int err; +struct cs8427 *chip; +struct snd_i2c_device *device; + + err =snd_i2c_device_create (bus,"CS8427" ,CS8427_ADDR | (addr &7 ), + &device); +if (err <0 ) +return err; + chip = device->private_data =kzalloc (sizeof (*chip),GFP_KERNEL ); +if (chip ==NULL ) { +snd_i2c_device_free (device); +return -ENOMEM ; + } + device->private_free = snd_cs8427_free; +if (reset_timeout <1 ) reset_timeout =1 ; chip->reset_timeout = reset_timeout; -snd_cs8427_reset (device); + + err =snd_cs8427_init (bus, device); +if (err) + goto __fail;#if 0 // it's nice for read tests {@@ -286,7 +306,6 @@ int snd_cs8427_create(struct snd_i2c_bus *bus,return 0 ; __fail: -snd_i2c_unlock (bus);snd_i2c_device_free (device);return err <0 ? err : -EIO ; }Signature · 1 line
Ondrej Zary