drm/i915: move power domain init earlier during system resume
Subsystems (2)
PATCH 1/1 drm/i915: move power domain init earlier during system resume
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver.
The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
--- drivers/gpu/drm/i915/i915_drv.c | 68 ++++++++++++++++++++++++++++++++++------- 1 file changed, 57 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +57 -11
@@ -537,6 +537,15 @@ static void intel_resume_hotplug(struct drm_device *dev)drm_helper_hpd_irq_event (dev); } +static int i915_drm_thaw_early (struct drm_device *dev) +{ +struct drm_i915_private *dev_priv = dev->dev_private; + +intel_power_domains_init_hw (dev_priv); + +return 0 ; +} +static int __i915_drm_thaw (struct drm_device *dev,bool restore_gtt_mappings) {struct drm_i915_private *dev_priv = dev->dev_private;
@@ -553,8 +562,6 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)mutex_unlock (&dev->struct_mutex); } -intel_power_domains_init_hw (dev_priv); -i915_restore_state (dev);intel_opregion_setup (dev);
@@ -619,11 +626,8 @@ static int i915_drm_thaw(struct drm_device *dev)return __i915_drm_thaw (dev, true); } -int i915_resume (struct drm_device *dev) +static int i915_resume_early (struct drm_device *dev) { -struct drm_i915_private *dev_priv = dev->dev_private; -int ret; -if (dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ;
@@ -632,6 +636,14 @@ int i915_resume(struct drm_device *dev)pci_set_master (dev->pdev); +return i915_drm_thaw_early (dev); +} + +int i915_resume (struct drm_device *dev) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +int ret; +/* * Platforms with opregion should have sane BIOS, older ones (gen3 and * earlier) need to restore the GTT mappings since the BIOS might clear
@@ -645,6 +657,14 @@ int i915_resume(struct drm_device *dev)return 0 ; } +int i915_resume_legacy (struct drm_device *dev) +{ +i915_resume_early (dev); +i915_resume (dev); + +return 0 ; +} +/** * i915_reset - reset chip after a hang * @dev: drm device to reset
@@ -776,7 +796,6 @@ static int i915_pm_suspend(struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);struct drm_device *drm_dev =pci_get_drvdata (pdev); -int error;if (!drm_dev || !drm_dev->dev_private) {dev_err (dev,"DRM not initialized, aborting suspend.\n" );
@@ -786,9 +805,16 @@ static int i915_pm_suspend(struct device *dev)if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ; - error =i915_drm_freeze (drm_dev); -if (error) -return error; +return i915_drm_freeze (drm_dev); +} + +static int i915_pm_suspend_late (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF ) +return 0 ;pci_disable_device (pdev);pci_set_power_state (pdev, PCI_D3hot);
@@ -796,6 +822,14 @@ static int i915_pm_suspend(struct device *dev)return 0 ; } +static int i915_pm_resume_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_resume_early (drm_dev); +} +static int i915_pm_resume (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);
@@ -817,6 +851,14 @@ static int i915_pm_freeze(struct device *dev)return i915_drm_freeze (drm_dev); } +static int i915_pm_thaw_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_drm_thaw_early (drm_dev); +} +static int i915_pm_thaw (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);
@@ -887,10 +929,14 @@ static int i915_runtime_resume(struct device *device)static const struct dev_pm_ops i915_pm_ops = { .suspend = i915_pm_suspend, + .suspend_late = i915_pm_suspend_late, + .resume_early = i915_pm_resume_early, .resume = i915_pm_resume, .freeze = i915_pm_freeze, + .thaw_early = i915_pm_thaw_early, .thaw = i915_pm_thaw, .poweroff = i915_pm_poweroff, + .restore_early = i915_pm_resume_early, .restore = i915_pm_resume, .runtime_suspend = i915_runtime_suspend, .runtime_resume = i915_runtime_resume,
@@ -933,7 +979,7 @@ static struct drm_driver driver = {/* Used in place of i915_pm_ops for non-DRIVER_MODESET */ .suspend = i915_suspend, - .resume = i915_resume, + .resume = i915_resume_legacy, .device_is_agp = i915_driver_device_is_agp, .master_create = i915_master_create,
Signature · 1 line
1.8.4
PATCH v2 1/1 drm/i915: move power domain init earlier during system resume
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver.
The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler.
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt. intel_power_domains_init_hw()
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
--- drivers/gpu/drm/i915/i915_drv.c | 72 +++++++++++++++++++++++++++++++++-------- 1 file changed, 58 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +58 -14
@@ -537,14 +537,21 @@ static void intel_resume_hotplug(struct drm_device *dev)drm_helper_hpd_irq_event (dev); } -static int __i915_drm_thaw (struct drm_device *dev,bool restore_gtt_mappings) +static int i915_drm_thaw_early (struct drm_device *dev) {struct drm_i915_private *dev_priv = dev->dev_private; -int error =0 ;intel_uncore_early_sanitize (dev); -intel_uncore_sanitize (dev); +intel_power_domains_init_hw (dev_priv); + +return 0 ; +} + +static int __i915_drm_thaw (struct drm_device *dev,bool restore_gtt_mappings) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +int error =0 ;if (drm_core_check_feature (dev,DRIVER_MODESET ) && restore_gtt_mappings) {
@@ -553,8 +560,6 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)mutex_unlock (&dev->struct_mutex); } -intel_power_domains_init_hw (dev_priv); -i915_restore_state (dev);intel_opregion_setup (dev);
@@ -619,11 +624,8 @@ static int i915_drm_thaw(struct drm_device *dev)return __i915_drm_thaw (dev, true); } -int i915_resume (struct drm_device *dev) +static int i915_resume_early (struct drm_device *dev) { -struct drm_i915_private *dev_priv = dev->dev_private; -int ret; -if (dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ;
@@ -632,6 +634,14 @@ int i915_resume(struct drm_device *dev)pci_set_master (dev->pdev); +return i915_drm_thaw_early (dev); +} + +int i915_resume (struct drm_device *dev) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +int ret; +/* * Platforms with opregion should have sane BIOS, older ones (gen3 and * earlier) need to restore the GTT mappings since the BIOS might clear
@@ -645,6 +655,14 @@ int i915_resume(struct drm_device *dev)return 0 ; } +int i915_resume_legacy (struct drm_device *dev) +{ +i915_resume_early (dev); +i915_resume (dev); + +return 0 ; +} +/** * i915_reset - reset chip after a hang * @dev: drm device to reset
@@ -776,7 +794,6 @@ static int i915_pm_suspend(struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);struct drm_device *drm_dev =pci_get_drvdata (pdev); -int error;if (!drm_dev || !drm_dev->dev_private) {dev_err (dev,"DRM not initialized, aborting suspend.\n" );
@@ -786,9 +803,16 @@ static int i915_pm_suspend(struct device *dev)if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ; - error =i915_drm_freeze (drm_dev); -if (error) -return error; +return i915_drm_freeze (drm_dev); +} + +static int i915_pm_suspend_late (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF ) +return 0 ;pci_disable_device (pdev);pci_set_power_state (pdev, PCI_D3hot);
@@ -796,6 +820,14 @@ static int i915_pm_suspend(struct device *dev)return 0 ; } +static int i915_pm_resume_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_resume_early (drm_dev); +} +static int i915_pm_resume (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);
@@ -817,6 +849,14 @@ static int i915_pm_freeze(struct device *dev)return i915_drm_freeze (drm_dev); } +static int i915_pm_thaw_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_drm_thaw_early (drm_dev); +} +static int i915_pm_thaw (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);
@@ -887,10 +927,14 @@ static int i915_runtime_resume(struct device *device)static const struct dev_pm_ops i915_pm_ops = { .suspend = i915_pm_suspend, + .suspend_late = i915_pm_suspend_late, + .resume_early = i915_pm_resume_early, .resume = i915_pm_resume, .freeze = i915_pm_freeze, + .thaw_early = i915_pm_thaw_early, .thaw = i915_pm_thaw, .poweroff = i915_pm_poweroff, + .restore_early = i915_pm_resume_early, .restore = i915_pm_resume, .runtime_suspend = i915_runtime_suspend, .runtime_resume = i915_runtime_resume,
@@ -933,7 +977,7 @@ static struct drm_driver driver = {/* Used in place of i915_pm_ops for non-DRIVER_MODESET */ .suspend = i915_suspend, - .resume = i915_resume, + .resume = i915_resume_legacy, .device_is_agp = i915_driver_device_is_agp, .master_create = i915_master_create,
Signature · 1 line
1.8.4
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.
Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>
So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
-Daniel
Quoted 174 lines
--- drivers/gpu/drm/i915/i915_drv.c | 72 +++++++++++++++++++++++++++++++++-------- 1 file changed, 58 insertions(+), 14 deletions(-)drivers/gpu/drm/i915/i915_drv.c +58
-14@@ -537,14 +537,21 @@ static void intel_resume_hotplug(struct drm_device *dev)drm_helper_hpd_irq_event (dev); } -static int __i915_drm_thaw (struct drm_device *dev,bool restore_gtt_mappings) +static int i915_drm_thaw_early (struct drm_device *dev) {struct drm_i915_private *dev_priv = dev->dev_private; -int error =0 ;intel_uncore_early_sanitize (dev); -intel_uncore_sanitize (dev); +intel_power_domains_init_hw (dev_priv); + +return 0 ; +} + +static int __i915_drm_thaw (struct drm_device *dev,bool restore_gtt_mappings) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +int error =0 ;if (drm_core_check_feature (dev,DRIVER_MODESET ) && restore_gtt_mappings) {@@ -553,8 +560,6 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)mutex_unlock (&dev->struct_mutex); } -intel_power_domains_init_hw (dev_priv); -i915_restore_state (dev);intel_opregion_setup (dev);@@ -619,11 +624,8 @@ static int i915_drm_thaw(struct drm_device *dev)return __i915_drm_thaw (dev, true); } -int i915_resume (struct drm_device *dev) +static int i915_resume_early (struct drm_device *dev) { -struct drm_i915_private *dev_priv = dev->dev_private; -int ret; -if (dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ;@@ -632,6 +634,14 @@ int i915_resume(struct drm_device *dev)pci_set_master (dev->pdev); +return i915_drm_thaw_early (dev); +} + +int i915_resume (struct drm_device *dev) +{ +struct drm_i915_private *dev_priv = dev->dev_private; +int ret; +/* * Platforms with opregion should have sane BIOS, older ones (gen3 and * earlier) need to restore the GTT mappings since the BIOS might clear @@ -645,6 +655,14 @@ int i915_resume(struct drm_device *dev)return 0 ; } +int i915_resume_legacy (struct drm_device *dev) +{ +i915_resume_early (dev); +i915_resume (dev); + +return 0 ; +} +/** * i915_reset - reset chip after a hang * @dev: drm device to reset @@ -776,7 +794,6 @@ static int i915_pm_suspend(struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);struct drm_device *drm_dev =pci_get_drvdata (pdev); -int error;if (!drm_dev || !drm_dev->dev_private) {dev_err (dev,"DRM not initialized, aborting suspend.\n" );@@ -786,9 +803,16 @@ static int i915_pm_suspend(struct device *dev)if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF )return 0 ; - error =i915_drm_freeze (drm_dev); -if (error) -return error; +return i915_drm_freeze (drm_dev); +} + +static int i915_pm_suspend_late (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +if (drm_dev->switch_power_state ==DRM_SWITCH_POWER_OFF ) +return 0 ;pci_disable_device (pdev);pci_set_power_state (pdev, PCI_D3hot);@@ -796,6 +820,14 @@ static int i915_pm_suspend(struct device *dev)return 0 ; } +static int i915_pm_resume_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_resume_early (drm_dev); +} +static int i915_pm_resume (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);@@ -817,6 +849,14 @@ static int i915_pm_freeze(struct device *dev)return i915_drm_freeze (drm_dev); } +static int i915_pm_thaw_early (struct device *dev) +{ +struct pci_dev *pdev =to_pci_dev (dev); +struct drm_device *drm_dev =pci_get_drvdata (pdev); + +return i915_drm_thaw_early (drm_dev); +} +static int i915_pm_thaw (struct device *dev) {struct pci_dev *pdev =to_pci_dev (dev);@@ -887,10 +927,14 @@ static int i915_runtime_resume(struct device *device)static const struct dev_pm_ops i915_pm_ops = { .suspend = i915_pm_suspend, + .suspend_late = i915_pm_suspend_late, + .resume_early = i915_pm_resume_early, .resume = i915_pm_resume, .freeze = i915_pm_freeze, + .thaw_early = i915_pm_thaw_early, .thaw = i915_pm_thaw, .poweroff = i915_pm_poweroff, + .restore_early = i915_pm_resume_early, .restore = i915_pm_resume, .runtime_suspend = i915_runtime_suspend, .runtime_resume = i915_runtime_resume,@@ -933,7 +977,7 @@ static struct drm_driver driver = {/* Used in place of i915_pm_ops for non-DRIVER_MODESET */ .suspend = i915_suspend, - .resume = i915_resume, + .resume = i915_resume_legacy, .device_is_agp = i915_driver_device_is_agp, .master_create = i915_master_create,Signature · 6 lines
1.8.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 29 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
Quoted 5 lines
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
--Imre
Quoted 34 lines · Imre Deak
Quoted 33 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
Quoted 6 lines
Quoted 1 line
So not sure what I should do with this here now.
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
We'd definitely need to discuss this with Takashi Iwai, since it would only really be useful if it's good enough to solve the general pile of sound/gfx coordination issues we have with hdmi. Adding him and alsa-dev. -Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
At Tue, 1 Apr 2014 22:26:20 +0200,
Quoted 38 lines · Daniel Vetter
Quoted 36 lines · Imre Deak
Quoted 34 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
Quoted 8 lines
Quoted 4 lines
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
We'd definitely need to discuss this with Takashi Iwai, since it would only really be useful if it's good enough to solve the general pile of
sound/gfxcoordination issues we have with hdmi. Adding him and alsa-dev.
Yep, having a dedicated channel (hdmi sink bus or whatever) would be definitely a better way to go. OTOH, I agree that Imre's patch is needed for the upcoming kernel. The former implementation can't be finished so quickly for 3.15.
I thought Mengdong started looking at (or working on) this, but haven't heard the progress yet. Mengdong, any news?
thanks,
Takashi
Quoted 49 lines · Takashi Iwai
At Tue, 1 Apr 2014 22:26:20 +0200,
Quoted 38 lines · Daniel Vetter
Quoted 36 lines · Imre Deak
Quoted 34 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
Quoted 8 lines
Quoted 4 lines
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
We'd definitely need to discuss this with Takashi Iwai, since it would only really be useful if it's good enough to solve the general pile of
sound/gfxcoordination issues we have with hdmi. Adding him and alsa-dev.
Quoted 7 lines
Yep, having a dedicated channel (hdmi sink bus or whatever) would be definitely a better way to go. OTOH, I agree that Imre's patch is needed for the upcoming kernel. The former implementation can't be finished so quickly for 3.15.
I thought Mengdong started looking at (or working on) this, but haven't heard the progress yet. Mengdong, any news?
Ok, I'll splash a big honky FIXME over this so we don't forget ;-) Is the patch otherwise ok with you Takashi?
Thanks, Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Takashi Iwai
Reviewed-byAt Thu, 3 Apr 2014 17:23:10 +0200,
Quoted 56 lines · Daniel Vetter
Quoted 54 lines · Takashi Iwai
At Tue, 1 Apr 2014 22:26:20 +0200,
Quoted 38 lines · Daniel Vetter
Quoted 36 lines · Imre Deak
Quoted 34 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
Quoted 8 lines
Quoted 4 lines
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
We'd definitely need to discuss this with Takashi Iwai, since it would only really be useful if it's good enough to solve the general pile of
sound/gfxcoordination issues we have with hdmi. Adding him and alsa-dev.Yep, having a dedicated channel (hdmi sink bus or whatever) would be definitely a better way to go. OTOH, I agree that Imre's patch is needed for the upcoming kernel. The former implementation can't be finished so quickly for 3.15.
Quoted 5 lines
Quoted 2 lines
I thought Mengdong started looking at (or working on) this, but haven't heard the progress yet. Mengdong, any news?
Ok, I'll splash a big honky FIXME over this so we don't forget ;-) Is the patch otherwise ok with you Takashi?
Yes, it's touching only i915 stuff in anyway ;)
Feel free to take my ack:
thanks,
Takashi
Quoted 61 lines · Takashi Iwai
At Thu, 3 Apr 2014 17:23:10 +0200,
Quoted 59 lines · Daniel Vetter
Quoted 56 lines · Takashi Iwai
At Tue, 1 Apr 2014 22:26:20 +0200,
Quoted 38 lines · Daniel Vetter
Quoted 36 lines · Imre Deak
Quoted 34 lines · Daniel Vetter
Quoted 14 lines · Imre Deak
During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the
resume_earlyhandler. This is guaranteed to run before the resume handler of any other driver.The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.
Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the
resume_latehandler.Quoted 6 lines
v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt.intel_power_domains_init_hw()Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by Imre Deak <[email protected]>So this is kinda why we should have gone with something proper, like a new hdmi sink platform device created by i915 and registered as a driver by snd-hda. Then the power domains stuff in the device core should take care of these kinds of ordering issues. Or at least snd-hda can tell it that it needs to wait for the hdmi-sink power domain to go on first before it can resume, I'm not really fluent on the details here.
And having a hdmi sink bus would allow us to throw all kinds of crap into a clearly-defined interface, e.g. eld handling, hdcp synchronization, hpd forwarding and all the other fun stuff.
So not sure what I should do with this here now.
Quoted 8 lines
Quoted 4 lines
Right, I'm not too happy about this solution either, so if anything it could be considered only a stop-gap fix. What you suggest seems to be a cleaner way but it'd require more time to investigate/implement at least on my part (but I'm ok to put it on my TODO list).
We'd definitely need to discuss this with Takashi Iwai, since it would only really be useful if it's good enough to solve the general pile of
sound/gfxcoordination issues we have with hdmi. Adding him and alsa-dev.Yep, having a dedicated channel (hdmi sink bus or whatever) would be definitely a better way to go. OTOH, I agree that Imre's patch is needed for the upcoming kernel. The former implementation can't be finished so quickly for 3.15.
I thought Mengdong started looking at (or working on) this, but haven't heard the progress yet. Mengdong, any news?
Quoted 6 lines
Quoted 2 lines
Ok, I'll splash a big honky FIXME over this so we don't forget ;-) Is the patch otherwise ok with you Takashi?
Yes, it's touching only i915 stuff in anyway ;)
Feel free to take my ack:Reviewed-by Takashi Iwai <[email protected]>
Ok, I've pulled this into 3.15-fixes and added some big comments to the newly-added late/early hooks. I'll try to poke Mengmeng about the status of the hdmi infrastructure work.
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch