Skip to contentSkip to conversation

ARM: shmobile: lager: DT reference USB pinmux setup

PATCH New Magnus Damm 1 participant 1 message Apr 8, 2014

Subsystems (2)
Device tree bindings SuperH
lore
Share & tools
lore

Magnus Damm

author
#0 lore raw

PATCH v2 3/5 ARM: shmobile: lager: DT reference USB pinmux setup

From: Magnus Damm <[email protected]>

Configure the pinmux on Lager for USB ports via the default setting. This allows support for USB function on USB0 and USB Host for USB1 and USB2. Not for upstream merge.

Signed-off-by Magnus Damm <[email protected]>

---

 arch/arm/boot/dts/r8a7790-lager.dts |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7790-lager.dts +17 -1
@@ -146,7 +146,8 @@
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins
+		     &usb0_pins &usb1_pins &usb2_pins>;
 	pinctrl-names = "default";
 
 	du_pins: du {

@@ -199,6 +200,21 @@
 				 "msiof1_tx";
 		renesas,function = "msiof1";
 	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		renesas,groups = "usb2";
+		renesas,function = "usb2";
+	};
 };
 
 &ether {