Skip to contentSkip to conversation

ARM: shmobile: koelsch: DT reference USB pinmux setup

PATCH New Magnus Damm 1 participant 1 message Apr 8, 2014

Subsystems (2)
Device tree bindings SuperH
lore
Share & tools
lore

Magnus Damm

author
#0 lore raw

PATCH v2 5/5 ARM: shmobile: koelsch: DT reference USB pinmux setup

From: Magnus Damm <[email protected]>

Configure the pinmux on Koelsch for USB ports via the default setting. This allows support for USB function on USB0 and USB Host for USB1. Not for upstream merge.

Signed-off-by Magnus Damm <[email protected]>

---

 arch/arm/boot/dts/r8a7791-koelsch.dts |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7791-koelsch.dts +11 -1
@@ -230,7 +230,7 @@
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins &usb0_pins &usb1_pins>;
 	pinctrl-names = "default";
 
 	i2c2_pins: i2c2 {

@@ -288,6 +288,16 @@
 				 "msiof0_tx";
 		renesas,function = "msiof0";
 	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
 };
 
 &ether {