regulator fixes for v3.15
The following changes since commit 455c6fdbd219161bd09b1165f11699d6d73de11c:
Linux 3.14 (2014-03-30 20:40:15 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v3.15-fixes
for you to fetch changes up to 039df7a7cbccb4ea5527c92134b4535fb5bf9671:
Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m' and 'regulator/fix/s5m8767' into regulator-linus (2014-04-10 23:39:38 +0100)
Due to the way my scripts incorporate the things I already sent since your last tag the diffstat has picked up all the changes already sent (or I could've generated against my previous pull when it'd show all the changes from the final -rc to release). I will look into fixing that, please let me know if it's an immediate problem.
----------------------------------------------------------------
regulator: Fixes for v3.15
A few driver specific fixes that have come in over the merge window, all only relevant for the specific driver.
----------------------------------------------------------------
Axel Lin (2):
regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate
regulator: s2mps11: Don't check enable_shift before setting enable ramp rate
Krzysztof Kozlowski (1):
regulator: s5m8767: Fix carried over ena_gpio assignment
Mark Brown (2):
Merge tag 'regulator-v3.15' into regulator-linus
Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m' and 'regulator/fix/s5m8767' into regulator-linus
Tim Kryger (1):
regulator: bcm590xx: Set n_voltages for linear reg
Documentation/devicetree/bindings/mfd/s2mpa01.txt | 90 ++++ Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 +- Documentation/devicetree/bindings/mfd/tps65910.txt | 2 +- .../bindings/regulator/gpio-regulator.txt | 4 + .../devicetree/bindings/regulator/pfuze100.txt | 96 ++++- .../bindings/regulator/s5m8767-regulator.txt | 13 +- .../bindings/regulator/ti-abb-regulator.txt | 6 +- drivers/base/devres.c | 26 ++ drivers/mfd/sec-core.c | 112 ++++- drivers/mfd/sec-irq.c | 97 ++++- drivers/of/base.c | 32 ++ drivers/regulator/88pm800.c | 4 +- drivers/regulator/88pm8607.c | 8 +- drivers/regulator/Kconfig | 45 +- drivers/regulator/Makefile | 4 + drivers/regulator/aat2870-regulator.c | 1 + drivers/regulator/act8865-regulator.c | 21 +- drivers/regulator/anatop-regulator.c | 124 +++++- drivers/regulator/arizona-ldo1.c | 11 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 15 +- drivers/regulator/as3722-regulator.c | 1 + drivers/regulator/bcm590xx-regulator.c | 404 +++++++++++++++++ drivers/regulator/core.c | 14 + drivers/regulator/da9052-regulator.c | 29 +- drivers/regulator/da9055-regulator.c | 69 ++- drivers/regulator/da9063-regulator.c | 13 +- drivers/regulator/da9210-regulator.c | 5 +- drivers/regulator/db8500-prcmu.c | 2 + drivers/regulator/dbx500-prcmu.c | 16 +- drivers/regulator/dummy.c | 6 +- drivers/regulator/fan53555.c | 13 +- drivers/regulator/fixed.c | 46 +- drivers/regulator/gpio-regulator.c | 34 +- drivers/regulator/helpers.c | 48 ++- drivers/regulator/lp3971.c | 2 +- drivers/regulator/lp872x.c | 4 +- drivers/regulator/max14577.c | 8 +- drivers/regulator/max1586.c | 15 +- drivers/regulator/max77686.c | 15 +- drivers/regulator/max77693.c | 44 +- drivers/regulator/max8649.c | 8 +- drivers/regulator/max8660.c | 35 +- drivers/regulator/max8907-regulator.c | 16 +- drivers/regulator/max8925-regulator.c | 8 +- drivers/regulator/max8952.c | 26 +- drivers/regulator/max8973-regulator.c | 6 +- drivers/regulator/max8997.c | 22 +- drivers/regulator/max8998.c | 27 +- drivers/regulator/mc13xxx-regulator-core.c | 12 +- drivers/regulator/pfuze100-regulator.c | 204 ++++++--- drivers/regulator/rc5t583-regulator.c | 13 +- drivers/regulator/s2mpa01.c | 479 +++++++++++++++++++++ drivers/regulator/s2mps11.c | 376 ++++++++++++---- drivers/regulator/s5m8767.c | 172 +++++--- drivers/regulator/st-pwm.c | 190 ++++++++ drivers/regulator/ti-abb-regulator.c | 140 +++--- drivers/regulator/tps51632-regulator.c | 8 +- drivers/regulator/tps62360-regulator.c | 9 +- drivers/regulator/tps6507x-regulator.c | 29 +- drivers/regulator/tps65090-regulator.c | 13 +- drivers/regulator/tps65217-regulator.c | 17 +- drivers/regulator/tps65218-regulator.c | 285 ++++++++++++ drivers/regulator/tps6524x-regulator.c | 5 +- drivers/regulator/tps6586x-regulator.c | 20 +- drivers/regulator/tps65910-regulator.c | 21 +- drivers/regulator/tps80031-regulator.c | 6 +- drivers/regulator/wm831x-dcdc.c | 16 +- drivers/regulator/wm831x-isink.c | 4 +- drivers/regulator/wm831x-ldo.c | 12 +- drivers/regulator/wm8350-regulator.c | 4 +- drivers/regulator/wm8994-regulator.c | 4 +- include/linux/device.h | 1 + include/linux/mfd/samsung/core.h | 22 +- include/linux/mfd/samsung/irq.h | 81 +++- include/linux/mfd/samsung/rtc.h | 57 ++- include/linux/mfd/samsung/s2mpa01.h | 192 +++++++++ include/linux/mfd/samsung/s2mps14.h | 154 +++++++ include/linux/mfd/samsung/s5m8767.h | 7 + include/linux/of.h | 76 ++++ include/linux/regulator/driver.h | 8 + include/linux/regulator/pfuze100.h | 14 + 82 files changed, 3561 insertions(+), 753 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/s2mpa01.txt create mode 100644 drivers/regulator/bcm590xx-regulator.c create mode 100644 drivers/regulator/s2mpa01.c create mode 100644 drivers/regulator/st-pwm.c create mode 100644 drivers/regulator/tps65218-regulator.c create mode 100644 include/linux/mfd/samsung/s2mpa01.h create mode 100644 include/linux/mfd/samsung/s2mps14.h
Quoted 6 lines · Mark Brown
Due to the way my scripts incorporate the things I already sent since your last tag the diffstat has picked up all the changes already sent (or I could've generated against my previous pull when it'd show all the changes from the final -rc to release). I will look into fixing that, please let me know if it's an immediate problem.
Not an immediate problem, but have you tested just adding a simple "git fetch" from my repo to your scripts?
Note the "fetch". Not "pull". No merging going on, just updating your remote branch information with what is in my tree. Then you can just tell git to generate the report based on that information - never actually needing to update your own branches at all, or touching your own development state.
Linus
Quoted 3 lines · Linus Torvalds
Not an immediate problem, but have you tested just adding a simple "git fetch" from my repo to your scripts?
Oh, actually, the problem may just be that back-merge you have. When those cause multiple merge bases, "git diff" can no longer reliably generate a diff, since there is no clear base for it. And then "git fetch" to update my current state won't likely help, since the problem isn't that you don't see my previous pull, the problem is that the base isn't unique any more.
Linus
Quoted 6 lines · Linus Torvalds
Quoted 2 lines · Linus Torvalds
Not an immediate problem, but have you tested just adding a simple "git fetch" from my repo to your scripts?
Quoted 6 lines
Oh, actually, the problem may just be that back-merge you have. When those cause multiple merge bases, "git diff" can no longer reliably generate a diff, since there is no clear base for it. And then "git fetch" to update my current state won't likely help, since the problem isn't that you don't see my previous pull, the problem is that the base isn't unique any more.
Yeah, I'm pretty sure the problem is the actual back merge - the shortlog is doing the right thing for example. I did in fact have a copy of your merge in my tree, that's how the shortlog turned out right in this round of pull requests. I just need to arrange not to have the back merge either through being more sensible about what I ask you to pull or by improving the scripts.