Skip to contentSkip to conversation

ARM: dts: i.MX: Use single naming style for i.MX WEIM device

PATCH New Alexander Shiyan 2 participants 2 messages Apr 9, 2014 – Apr 13, 2014

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Alexander Shiyan

author
#0 lore raw

PATCH v3 1/1 ARM: dts: i.MX: Use single naming style for i.MX WEIM device

This patch converts all i.MX WEIM users to use single naming style for devices.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts  | 2 +-
 arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +1 -1
index 9117a3c..8b4181b 100644
@@ -280,7 +280,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim>;
 
-	can at d4000000 {
+	can at 4,0 {
 		compatible = "nxp,sja1000";
 		reg = <4 0x00000000 0x00000100>;
 		interrupt-parent = <&gpio5>;
arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +2 -2
index 8e10aef..d7ed63c 100644
@@ -311,7 +311,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor at c0000000 {
+	nor: nor at 0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;

@@ -321,7 +321,7 @@
 		#size-cells = <1>;
 	};
 
-	sram: sram at c8000000 {
+	sram: sram at 1,0 {
 		compatible = "mtd-ram";
 		reg = <1 0x00000000 0x00800000>;
 		bank-width = <2>;
Signature · 1 line
1.8.3.2
Applied
#1 lore raw

PATCH v3 1/1 ARM: dts: i.MX: Use single naming style for i.MX WEIM device

Quoted 4 lines · Alexander Shiyan

This patch converts all i.MX WEIM users to use single naming style for devices.

Signed-off-by Alexander Shiyan <[email protected]>

Applied, thanks.