ARM: dts: imx6q-gk802: Enable HDMI
Subsystems (2)
PATCH 1/1 ARM: dts: imx6q-gk802: Enable HDMI
This patch enables HDMI output on GK802 HDMI dongles.
Signed-off-by Philipp Zabel <[email protected]>
--- arch/arm/boot/dts/imx6q-gk802.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/imx6q-gk802.dts +5 -0
@@ -48,6 +48,11 @@ }; }; +&hdmi { + status = "okay"; + ddc-i2c-bus = <&i2c3>; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default";
Signature · 1 line
1.9.1
Quoted 12 lines · Philipp Zabel
This patch enables HDMI output on GK802 HDMI dongles.
Signed-off-by Philipp Zabel <[email protected]>--- arch/arm/boot/dts/imx6q-gk802.dts | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/imx6q-gk802.dts +0
-0
arch/arm/boot/dts/imx6q-gk802.dts line 52
Quoted 5 lines
arch/arm/boot/dts/imx6q-gk802.dts +2
-0@@ -48,6 +48,11 @@ }; }; +&hdmi { + status = "okay";
I prefer to put 'status' at the bottom of the property list.
Shawn
Quoted 11 lines
arch/arm/boot/dts/imx6q-gk802.dts +3
-0+ ddc-i2c-bus = <&i2c3>; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default";Signature · 1 line
1.9.1