Skip to contentSkip to conversation

ARM: dts: imx53-qsb-common: Add TVE support

PATCH New Fabio Estevam 2 participants 2 messages Apr 29, 2014

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v2 1/1 ARM: dts: imx53-qsb-common: Add TVE support

From: Fabio Estevam <[email protected]>

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Do not use the suffix 1 in pinctrl_vga_sync

 arch/arm/boot/dts/imx53-qsb-common.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/arm/boot/dts/imx53-qsb-common.dtsi +17 -0
index ede04fa..a491bde 100644
@@ -272,6 +272,14 @@
 			>;
 		};
 
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4

@@ -281,6 +289,15 @@
 	};
 };
 
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
Signature · 1 line
1.8.3.2