Skip to contentSkip to conversation

ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie

PATCH New Lucas Stach 2 participants 2 messages Apr 30, 2014 – May 4, 2014

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Lucas Stach

author
#0 lore raw

PATCH 1/1 ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie

This isn't compatible with the new binding and should be handled via a proper regulator. It shouldn't be needed as the driver has always ignored this property.

Signed-off-by Lucas Stach <[email protected]>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 --
 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-sabresd.dtsi +0 -2
index dbbd35b89985..3db4ca4dd70c 100644
@@ -391,7 +391,6 @@
 
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x80000000
 				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x80000000
 			>;
 		};

@@ -483,7 +482,6 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	power-on-gpio = <&gpio3 19 0>;
 	reset-gpio = <&gpio7 12 0>;
 	status = "okay";
 };
Signature · 1 line
1.9.1
Applied
#1 lore raw

PATCH 1/1 ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie

Quoted 5 lines · Lucas Stach

This isn't compatible with the new binding and should be handled via a proper regulator. It shouldn't be needed as the driver has always ignored this property.

Signed-off-by Lucas Stach <[email protected]>

Applied, thanks.