Make Acked/Reviewd/Tested-by tags visible
Hello All!
In the Buildroot community, we make heavy use of patchwork to track the patches that we still have pending. The maintainer (Peter, CCed) almost exclusively use pwclient to get that list of patches to apply.
Since we also use the Linux-like tags Acked-by, Reviewed-by and Tested-by, this is an indication to Peter that a patch is ready to be applied.
Unfortunately, it is not easy to know at a glance what patches have such tags, without checking the mailing list, so for each patch.
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
ID Tags State Subject
123456 ART New Wonderfull patch to apply quickly
Where each of 'A', 'R', and 'T' would mean Acked-by, Reviewed-by and Tested-by, respectively. An uppercase letter would mean two of more of such tag, while a lower-case letter would mean a single such tag.
This way, it is easy to quickly sort high-profile patches that can be easily handled by Peter without too much work (patches with tags), and to the other contributors (some in Cc too) as a list of patches to look at (patches without a tag).
Since patchwork already inserts those tags to the commit log (eg. pwclient view PATCH-ID), I hope it would be easy enough to also display it in the patch list.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
A message that is not in the archive (sent off-list or not yet received): [email protected]
Dear Jeremy Kerr,
Quoted 16 lines · Jeremy Kerr
Quoted 6 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
ID Tags State Subject
123456 ART New Wonderfull patch to apply quicklyI've been looking to implement this for a while, but didn't have any good ideas about how to present this in the UI. I love your proposal here with the flags, it's simple and I think would work well for the majority of cases.
Quoted 3 lines
Since patchwork already inserts those tags to the commit log (eg. pwclient view PATCH-ID), I hope it would be easy enough to also display it in the patch list.
Quoted 8 lines
It's easy enough to pull these out of the comment at patch-display time, but a little more tricky with list views (without some horrible SQL joining). I'll work out a nice way to to this; I think it'll involve applying these flags when the follow-up comment is parsed.
Other projects have different policies for their tagging (some require 3 acks, for example), which will introduce a little complexity there too, but that's not insurmountable either.
Another thing that comes to mind is that not all Acked-by or Tested-by are equal, I believe. An Acked-by from a well-known long-time contributor will not be seen with the same level of trust that an Acked-by from an unknown newcomer. Do we want to add a mechanism of "rating"? But that would mean the project maintainer would have to "rate" developers, which is not nice. Or maybe just a list of e-mails that the project's maintainer considers as trustworthy, and only those ones would be taken into account when displaying the ART flags?
Or maybe it doesn't matter too much, since in the vast majority of cases, only well-known long-time contributors are doing reviews/acks.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Hi,
On Tue, Nov 12, 2013 at 7:58 AM, Thomas Petazzoni
<[email protected]> wrote:
[..]
Quoted 13 lines
Quoted 3 lines
Other projects have different policies for their tagging (some require 3 acks, for example), which will introduce a little complexity there too, but that's not insurmountable either.
Another thing that comes to mind is that not all Acked-by or Tested-by are equal, I believe. An Acked-by from a well-known long-time contributor will not be seen with the same level of trust that an Acked-by from an unknown newcomer. Do we want to add a mechanism of "rating"? But that would mean the project maintainer would have to "rate" developers, which is not nice. Or maybe just a list of e-mails that the project's maintainer considers as trustworthy, and only those ones would be taken into account when displaying the ART flags?
Quoted 2 lines
Or maybe it doesn't matter too much, since in the vast majority of cases, only well-known long-time contributors are doing reviews/acks.
Patchwork already has the concept of maintainers, that is a list of people having patchwork change privileges. Maybe it is sufficient to differentiate Acked/Reviewed/Tested from either maintainer or non-maintainer? It would not require additional administration.
Best regards,
Thomas
Quoted 38 lines · Thomas Petazzoni
Dear Jeremy Kerr,
Quoted 16 lines · Jeremy Kerr
Quoted 6 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
ID Tags State Subject
123456 ART New Wonderfull patch to apply quicklyI've been looking to implement this for a while, but didn't have any good ideas about how to present this in the UI. I love your proposal here with the flags, it's simple and I think would work well for the majority of cases.
Quoted 3 lines
Since patchwork already inserts those tags to the commit log (eg. pwclient view PATCH-ID), I hope it would be easy enough to also display it in the patch list.
Quoted 8 lines
It's easy enough to pull these out of the comment at patch-display time, but a little more tricky with list views (without some horrible SQL joining). I'll work out a nice way to to this; I think it'll involve applying these flags when the follow-up comment is parsed.
Other projects have different policies for their tagging (some require 3 acks, for example), which will introduce a little complexity there too, but that's not insurmountable either.
Another thing that comes to mind is that not all Acked-by or Tested-by are equal, I believe. An Acked-by from a well-known long-time contributor will not be seen with the same level of trust that an Acked-by from an unknown newcomer. Do we want to add a mechanism of "rating"? But that would mean the project maintainer would have to "rate" developers, which is not nice. Or maybe just a list of e-mails that the project's maintainer considers as trustworthy, and only those ones would be taken into account when displaying the ART flags?
Quoted 2 lines
Or maybe it doesn't matter too much, since in the vast majority of cases, only well-known long-time contributors are doing reviews/acks.
I think the ART flags in the patch list should never be used blindly
anyway. Instead, it's an indicator of which patches are interesting to look at in more detail. Right?
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Arnout, All,
On 2013-11-12 09:10 +0100, Arnout Vandecappelle spake thusly:
Quoted 3 lines
I think the ART flags in the patch list should never be used blindly
anyway. Instead, it's an indicator of which patches are interesting to look at in more detail. Right?
That's the way I would use it, yes:
- as a maintainer, I'd first look at patches with ART flags to apply
them;
- as a contributor, I'd first look at patches without ART flags to review them.
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Jeremy, All,
On 2013-11-12 08:37 +0800, Jeremy Kerr spake thusly:
Quoted 11 lines
Quoted 6 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
ID Tags State Subject
123456 ART New Wonderfull patch to apply quicklyI've been looking to implement this for a while, but didn't have any good ideas about how to present this in the UI. I love your proposal here with the flags, it's simple and I think would work well for the majority of cases.
Just checking: any progress on this? ;-)
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Jeremy, All,
On 2013-11-11 22:54 +0100, Yann E. MORIN spake thusly:
[--SNIP--]
Quoted 10 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
ID Tags State Subject
123456 ART New Wonderfull patch to apply quicklyWhere each of 'A', 'R', and 'T' would mean Acked-by, Reviewed-by and Tested-by, respectively. An uppercase letter would mean two of more of such tag, while a lower-case letter would mean a single such tag.
Any progress on this?
I've tried doing so myself, but my two attempts lamentably failed... :-( Any one with Python- and SQL-fuu willing to have a look?
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Hi all,
Quoted 3 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
OK, I have some progress on this one; but wanted to make sure what I'm doing is in the direction that'd be generally useful for you.
How's this look?
http://ozlabs.org/~jk/tmp/patchwork-ART.png
- there are title attributes on the column header, so you get a tooltip saying "Acked-by / Reviewed-by / Tested-by" when hovering over it. The actual numbers have specific tooltips too (eg, "2 Acked-by").
Also, are you wanting to filter by the presence of these tags? Just non-zero? How about sorting?
Anyone have objections to adding a small column to the default patch lists? Does anyone want to *not* have this information present?
Cheers,
Jeremy
Dear Jeremy Kerr,
Quoted 10 lines · Jeremy Kerr
OK, I have some progress on this one; but wanted to make sure what I'm doing is in the direction that'd be generally useful for you.
How's this look?
http://ozlabs.org/~jk/tmp/patchwork-ART.png
- there are title attributes on the column header, so you get a tooltip saying "Acked-by / Reviewed-by / Tested-by" when hovering over it. The actual numbers have specific tooltips too (eg, "2 Acked-by").
This looks good! I actually made an implementation of this when I was in the plane to the US a week ago, but I didn't had the necessary setup to test it. Glad to see you've done it :)
Quoted 2 lines
Also, are you wanting to filter by the presence of these tags? Just non-zero? How about sorting?
Sorting would be useful. I guess sorting for each tag is a bit too much, so maybe sorting by the total of A+R+T is sufficient.
Quoted 2 lines
Anyone have objections to adding a small column to the default patch lists? Does anyone want to *not* have this information present?
On Buildroot's side, we wanted this feature, so we're not really interested in being able to disable it. But maybe some other projects do not need it, indeed.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Jeremy, All,
On 2014-05-07 16:42 +0800, Jeremy Kerr spake thusly:
Quoted 10 lines
Quoted 3 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
OK, I have some progress on this one; but wanted to make sure what I'm doing is in the direction that'd be generally useful for you.
How's this look?
Yes, that's good!
I believe you will also add this in the pwclient output, right?
Quoted 6 lines
- there are title attributes on the column header, so you get a tooltip saying "Acked-by / Reviewed-by / Tested-by" when hovering over it. The actual numbers have specific tooltips too (eg, "2 Acked-by").
Also, are you wanting to filter by the presence of these tags? Just non-zero? How about sorting?
Filtering would be a plus, sure. I'd like to have those filters:
- has a non-zero A/R/T sum
-> as a maintainer, I want to handle patches that have already been
acked/reviewed/tested- has a zero A/R/T sum
-> as a contributor, I want to review patches that have not already
been acked/reviewed/testedMaybe something like:
pwclient list [-t|--tag N]
where N is the A/R/T sum you want to filter on.
Quoted 2 lines
Anyone have objections to adding a small column to the default patch lists? Does anyone want to *not* have this information present?
In Buildroot and crosstool-NG, we do use A/R/T. Other projects (eg. VLC) does not use those flags, so it should be possible to enable/disable those flags, and disabled by default (to be backward compatible with existing management scripts.)
In pwclient, maybe show the A/R/T flags only if filtering on them was requested.
Thanks for putting some efforts in that! :-)
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Jeremy, All,
On 2014-05-07 16:42 +0800, Jeremy Kerr spake thusly:
Quoted 10 lines
Quoted 3 lines
We would like to suggest that the web GUI and the pwclient CLI both display such tags besides each patch, a bit like (hypotetical output of pwclient):
OK, I have some progress on this one; but wanted to make sure what I'm doing is in the direction that'd be generally useful for you.
How's this look?
Just a little reminder on this...
When are you planning on deploying that?
Will it also show up in the output of pwclient?
Thanks for your good work! :-)
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Hi Yann,
Quoted 8 lines
Quoted 3 lines
How's this look?
Just a little reminder on this...
When are you planning on deploying that?
Will it also show up in the output of pwclient?
I've just rolled out the initial code to patchwork.ozlabs.org. The tag counts are all at zero to start with; I've triggered a re-parse of all of the existing comments, so the counts should reflect reality when that process finishes.
The filter UI and pwclient interface are still yet to be done though; they're next on my todo list :)
Cheers,
Jeremy
Hi all,
Quoted 4 lines
I've just rolled out the initial code to patchwork.ozlabs.org. The tag counts are all at zero to start with; I've triggered a re-parse of all of the existing comments, so the counts should reflect reality when that process finishes.
On second thoughts, I've disabled the display of the counts until the update is complete, so we don't have false info in the UI in the meantime. I'll re-enable once that's done.
Cheers,
Jeremy
Jeremy, All,
On 2014-06-03 22:15 +0800, Jeremy Kerr spake thusly:
Quoted 8 lines
Quoted 4 lines
I've just rolled out the initial code to patchwork.ozlabs.org. The tag counts are all at zero to start with; I've triggered a re-parse of all of the existing comments, so the counts should reflect reality when that process finishes.
On second thoughts, I've disabled the display of the counts until the update is complete, so we don't have false info in the UI in the meantime. I'll re-enable once that's done.
For those not checking their web UI: the A/R/T status is now visible in the web UI!
Thanks Jeremy!
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Yann" == Yann E MORIN <[email protected]> writes:
Jeremy, All,
On 2014-06-03 22:15 +0800, Jeremy Kerr spake thusly:Quoted 5 lines
Quoted 4 lines
I've just rolled out the initial code to patchwork.ozlabs.org. The tag counts are all at zero to start with; I've triggered a re-parse of all of the existing comments, so the counts should reflect reality when that process finishes.
Quoted 6 lines
Quoted 3 lines
On second thoughts, I've disabled the display of the counts until the update is complete, so we don't have false info in the UI in the meantime. I'll re-enable once that's done.
For those not checking their web UI: the A/R/T status is now visible in the web UI!
Great, thanks all!
Signature · 1 line
Bye, Peter Korsgaard