ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
PATCH 1/1 ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
This patch removes excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27. Instead we use SOC_IMX*.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/mach-imx/Kconfig | 12 ------------ arch/arm/mach-imx/devices/Kconfig | 2 +- drivers/media/platform/soc_camera/Kconfig | 2 +- 3 files changed, 2 insertions(+), 14 deletions(-)
arch/arm/mach-imx/Kconfig +0 -12
@@ -67,18 +67,8 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config ARCH_MX1 - bool - -config ARCH_MX25 - bool - -config MACH_MX27 - bool - config SOC_IMX1 bool - select ARCH_MX1 select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC
@@ -91,7 +81,6 @@ config SOC_IMX21 config SOC_IMX25 bool - select ARCH_MX25 select ARCH_MXC_IOMUX_V3 select CPU_ARM926T select MXC_AVIC
@@ -103,7 +92,6 @@ config SOC_IMX27 select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX27 select MXC_AVIC select PINCTRL_IMX27
arch/arm/mach-imx/devices/Kconfig +1 -1
@@ -1,6 +1,6 @@ config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 + default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 config IMX_HAVE_PLATFORM_FLEXCAN bool
drivers/media/platform/soc_camera/Kconfig +1 -1
@@ -63,7 +63,7 @@ config VIDEO_OMAP1 config VIDEO_MX2 tristate "i.MX27 Camera Sensor Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && MACH_MX27 + depends on VIDEO_DEV && SOC_CAMERA && SOC_IMX27 select VIDEOBUF2_DMA_CONTIG ---help--- This is a v4l2 driver for the i.MX27 Camera Sensor Interface
Signature · 1 line
1.8.3.2
PATCH 1/1 ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
Quoted 4 lines · Alexander Shiyan
This patch removes excess symbols
ARCH_MX1,ARCH_MX25andMACH_MX27. Instead we use SOC_IMX*.Signed-off-by Alexander Shiyan <[email protected]>
Acked-by Uwe Kleine-K?nig <[email protected]>
Thanks
Uwe
Signature · 2 lines
Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |
PATCH 1/1 ARM: i.MX: Remove excess symbols ARCH_MX1, ARCH_MX25 and MACH_MX27
In reply to Alexander ShiyanQuoted 8 lines · Alexander Shiyan
This patch removes excess symbols
ARCH_MX1,ARCH_MX25andMACH_MX27. Instead we use SOC_IMX*.Signed-off-by Alexander Shiyan <[email protected]>--- arch/arm/mach-imx/Kconfig | 12 ------------ arch/arm/mach-imx/devices/Kconfig | 2 +- drivers/media/platform/soc_camera/Kconfig | 2 +-
We need to either split this file change into another patch or get an ACK from Mauro or Guennadi.
Shawn
Quoted 69 lines
3 files changed, 2 insertions(+), 14 deletions(-)arch/arm/mach-imx/Kconfig +0
-12@@ -67,18 +67,8 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config ARCH_MX1 - bool - -config ARCH_MX25 - bool - -config MACH_MX27 - bool - config SOC_IMX1 bool - select ARCH_MX1 select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC@@ -91,7 +81,6 @@ config SOC_IMX21 config SOC_IMX25 bool - select ARCH_MX25 select ARCH_MXC_IOMUX_V3 select CPU_ARM926T select MXC_AVIC@@ -103,7 +92,6 @@ config SOC_IMX27 select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX27 select MXC_AVIC select PINCTRL_IMX27arch/arm/mach-imx/devices/Kconfig +1
-1@@ -1,6 +1,6 @@ config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 + default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 config IMX_HAVE_PLATFORM_FLEXCAN booldrivers/media/platform/soc_camera/Kconfig +1
-1@@ -63,7 +63,7 @@ config VIDEO_OMAP1 config VIDEO_MX2 tristate "i.MX27 Camera Sensor Interface driver" - depends on VIDEO_DEV && SOC_CAMERA && MACH_MX27 + depends on VIDEO_DEV && SOC_CAMERA && SOC_IMX27 select VIDEOBUF2_DMA_CONTIG ---help--- This is a v4l2 driver for the i.MX27 Camera Sensor InterfaceSignature · 1 line
1.8.3.2