ARM: i.MX: Open "Device tree only" Kconfig chapter for non-V7 CPUs
Subsystems (3)
PATCH 1/2 ARM: i.MX: Open "Device tree only" Kconfig chapter for non-V7 CPUs
This patch allows to add support for other (non-V7) CPUs into "Device tree only" Kconfig chapter.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/mach-imx/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/mach-imx/Kconfig +9 -9
@@ -742,23 +742,25 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice +endif + comment "Device tree only" -config SOC_IMX50 +config SOC_IMX50 bool "i.MX50 support" + depends on ARCH_MULTI_V7 select HAVE_IMX_SRC select PINCTRL_IMX50 select SOC_IMX5 - help This enables support for Freescale i.MX50 processor. -config SOC_IMX53 +config SOC_IMX53 bool "i.MX53 support" + depends on ARCH_MULTI_V7 select HAVE_IMX_SRC select PINCTRL_IMX53 select SOC_IMX5 - help This enables support for Freescale i.MX53 processor.
@@ -778,6 +780,7 @@ config SOC_IMX6 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" + depends on ARCH_MULTI_V7 select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP
@@ -785,32 +788,29 @@ config SOC_IMX6Q select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 - help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" + depends on ARCH_MULTI_V7 select PINCTRL_IMX6SL select SOC_IMX6 - help This enables support for Freescale i.MX6 SoloLite processor. config SOC_VF610 bool "Vybrid Family VF610 support" + depends on ARCH_MULTI_V7 select ARM_GIC select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 - help This enable support for Freescale Vybrid VF610 processor. -endif - source "arch/arm/mach-imx/devices/Kconfig" endmenu
Signature · 1 line
1.8.3.2
PATCH 2/2 ARM: i.MX: Select HAVE_IMX_SRC for i.MX5 globally
No reason to choose a symbol HAVE_IMX_SRC separately for each supported i.MX5 CPU, this patch selects this symbol globally for i.MX5.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/mach-imx/Kconfig | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/arm/mach-imx/Kconfig +1 -3
@@ -127,11 +127,11 @@ config SOC_IMX5 select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 + select HAVE_IMX_SRC select MXC_TZIC config SOC_IMX51 bool - select HAVE_IMX_SRC select PINCTRL_IMX51 select SOC_IMX5
@@ -749,7 +749,6 @@ comment "Device tree only" config SOC_IMX50 bool "i.MX50 support" depends on ARCH_MULTI_V7 - select HAVE_IMX_SRC select PINCTRL_IMX50 select SOC_IMX5 help
@@ -758,7 +757,6 @@ config SOC_IMX50 config SOC_IMX53 bool "i.MX53 support" depends on ARCH_MULTI_V7 - select HAVE_IMX_SRC select PINCTRL_IMX53 select SOC_IMX5 help
Signature · 1 line
1.8.3.2
Shawn Guo
AppliedPATCH 2/2 ARM: i.MX: Select HAVE_IMX_SRC for i.MX5 globally
Quoted 4 lines · Alexander Shiyan
No reason to choose a symbol
HAVE_IMX_SRCseparately for each supported i.MX5 CPU, this patch selects this symbol globally for i.MX5.Signed-off-by Alexander Shiyan <[email protected]>
Applied, thanks.
PATCH 1/2 ARM: i.MX: Open "Device tree only" Kconfig chapter for non-V7 CPUs
In reply to Alexander ShiyanQuoted 4 lines · Alexander Shiyan
This patch allows to add support for other (non-V7) CPUs into "Device tree only"
Kconfigchapter.Signed-off-by Alexander Shiyan <[email protected]>
Let's do that when there are actually non-V7 platforms that become device tree only?
Shawn
Quoted 84 lines
--- arch/arm/mach-imx/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)arch/arm/mach-imx/Kconfig +9
-9@@ -742,23 +742,25 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice +endif + comment "Device tree only" -config SOC_IMX50 +config SOC_IMX50 bool "i.MX50 support" + depends on ARCH_MULTI_V7 select HAVE_IMX_SRC select PINCTRL_IMX50 select SOC_IMX5 - help This enables support for Freescale i.MX50 processor. -config SOC_IMX53 +config SOC_IMX53 bool "i.MX53 support" + depends on ARCH_MULTI_V7 select HAVE_IMX_SRC select PINCTRL_IMX53 select SOC_IMX5 - help This enables support for Freescale i.MX53 processor.@@ -778,6 +780,7 @@ config SOC_IMX6 config SOC_IMX6Q bool "i.MX6 Quad/DualLite support" + depends on ARCH_MULTI_V7 select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP@@ -785,32 +788,29 @@ config SOC_IMX6Q select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 - help This enables support for Freescale i.MX6 Quad processor. config SOC_IMX6SL bool "i.MX6 SoloLite support" + depends on ARCH_MULTI_V7 select PINCTRL_IMX6SL select SOC_IMX6 - help This enables support for Freescale i.MX6 SoloLite processor. config SOC_VF610 bool "Vybrid Family VF610 support" + depends on ARCH_MULTI_V7 select ARM_GIC select PINCTRL_VF610 select VF_PIT_TIMER select PL310_ERRATA_588369 if CACHE_PL310 select PL310_ERRATA_727915 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 - help This enable support for Freescale Vybrid VF610 processor. -endif - source "arch/arm/mach-imx/devices/Kconfig" endmenuSignature · 1 line
1.8.3.2