Skip to contentSkip to conversation

ARM: add drivers for Colibri T30 to multi_v7_defconfig

PATCH New stefan at agner.ch 3 participants 3 messages May 14, 2014 – May 20, 2014

Subsystems (2)
Arm (32-bit) Tegra architecture support
lore
Share & tools
lore

stefan at agner.ch

author
#0 lore raw

PATCH 1/1 ARM: add drivers for Colibri T30 to multi_v7_defconfig

From: Stefan Agner <[email protected]>

Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig.

Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller.

Signed-off-by Stefan Agner <[email protected]>
---
 arch/arm/configs/multi_v7_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/configs/multi_v7_defconfig +6 -0
index d4e8a47..20d9f11 100644
@@ -96,6 +96,11 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y

@@ -286,6 +291,7 @@ CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TWL4030=y
Signature · 1 line
1.9.2
#1 lore raw

PATCH 1/1 ARM: add drivers for Colibri T30 to multi_v7_defconfig

Quoted 9 lines · stefan at agner.ch

From: Stefan Agner <[email protected]>

Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig.

Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller.

Acked-by Stephen Warren <[email protected]>
Applied
#2 lore raw

PATCH 1/1 ARM: add drivers for Colibri T30 to multi_v7_defconfig

Quoted 8 lines · Stephen Warren
Quoted 7 lines · stefan at agner.ch

From: Stefan Agner <[email protected]>

Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board, hence enable those drivers in tegra_defonfig and multi_v7_defconfig.

Quoted 4 lines
Quoted 2 lines

Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controller.

Acked-by Stephen Warren <[email protected]>

Applied.

-Olof