ARM: dts: sun7i: cubietruck: set mmc3 bus-width property

bus-width defaults to 1, and all 4 lines are hooked up at the cubietruck, properly set bus-width to 4.

---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 1 +
 1 file changed, 1 insertion(+)

index 765191d..70271f6 100644
@@ -34,6 +34,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc3_pins_a>;
 			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
 			non-removable;
 			status = "okay";
 		};

1.9.0

The i12 tvbox is an A20 based android tvbox, with 512M / 1G RAM, 4G nand flash, ap6210 or ap6330 sdio wifi + bt (broadcom sdio wifi + uart attached brcm bt), 2USB host ports using USB-A receptacles and a micro-usb receptacle for USB OTG, and 100Mbit ethernet using an IP101a phy.

The PCB is labelled i12-a20 hence I've named the board i12-a20. It is used in noname allwinner A20 tv-boxes, which are sometimes sold with Q5 or QT840A as product name.

---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 176 ++++++++++++++++++++++++++++++
 2 files changed, 177 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

index 1d9c50d..b40be4e 100644
@@ -349,6 +349,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun6i-a31-m9.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \

1.9.0

Merged the two patches, thanks!
Maxime

Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140522/9988e7a9/attachment.sig>