Skip to contentSkip to conversation

Pull request: u-boot-arm/master

U-Boot Albert ARIBAUD 2 participants 2 messages May 20, 2014 – May 22, 2014

lore
Share & tools
lore
#0 lore raw

Hello Tom,

The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16 18:30:33 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-arm master

for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:

Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42 +0200)

Note: there still is a Zynq PR pending right now, but I wanted to get re-synchronized with mainline first; a further PR with Zynq and individual patches will arrive soon.

----------------------------------------------------------------

Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config

Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge remote-tracking branch 'u-boot-sh/rmobile' boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'

Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine

Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob

Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image

Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask

Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir siemens:cosmetic, dxr2: rename dxr2 to draco siemens, draco: add new target

Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip RiOTboard and MarSBoard: add new boards support imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi embest/mx6boards: use common detect_hdmi

Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD

Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit

Inha Song (1):
samsung: misc: add env default option to lcd menu

Jaehoon Chung (1):
ARM: exynos: remove the unused code

Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support

Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD

Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update

Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in rmobile_get_cpu_rev_integer() arm: rmobile: Add rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE

Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD

Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen

Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system

Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm

Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support

Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller

Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE

Yegor Yefremov (1):
am33xx: add SSC enable macro

?ukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2

Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++-------------- arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>

 cpu_info-rcar.c} |   12 +-
 arch/arm/cpu/armv7/rmobile/cpu_info.c                              |
 49 ++-
 arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S                    |
 20 +-
 arch/arm/cpu/armv7/socfpga/lowlevel_init.S                         |
 15 +-
 arch/arm/cpu/armv7/start.S                                         |
 253 +-------------
 arch/arm/cpu/armv7/zynq/u-boot.lds
 |    2 +-
 arch/arm/cpu/pxa/cpuinfo.c
 |    6 +
 arch/arm/cpu/pxa/start.S                                           |
 253 +-------------
 arch/arm/cpu/sa1100/cpu.c                                          |
 14 +
 arch/arm/cpu/sa1100/start.S                                        |
 225 +------------
 arch/arm/cpu/tegra-common/pinmux-common.c                          |
 19 ++
 arch/arm/cpu/u-boot-spl.lds
 |    1 +
 arch/arm/cpu/u-boot.lds
 |    1 +
 arch/arm/dts/exynos4210-origen.dts
 |    4 +-
 arch/arm/dts/exynos4210-trats.dts
 |    6 +-
 arch/arm/dts/exynos4210-universal_c210.dts
 |    4 +-
 arch/arm/dts/exynos4412-trats2.dts
 |    4 +-
 arch/arm/dts/imx6q-sabreauto.dts                                   |
 10 +-
 arch/arm/imx-common/Makefile
 |    1 +
 arch/arm/imx-common/iomux-v3.c
 |    8 +
 arch/arm/imx-common/video.c                                        |
 65 ++++
 arch/arm/include/asm/arch-am33xx/clock.h
 |    2 +
 arch/arm/include/asm/arch-exynos/cpu.h                             |
 17 +-
 arch/arm/include/asm/arch-exynos/gpio.h                            |
 1761
 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
 arch/arm/include/asm/arch-mx25/imx-regs.h                          |
 175 ++++++++++
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
 |    4 +
 arch/arm/include/asm/arch-omap5/clock.h
 |    3 +
 arch/arm/include/asm/arch-omap5/omap.h
 |    1 +
 arch/arm/include/asm/arch-rmobile/r8a7790.h                        |
 609 +---------------------------------
 arch/arm/include/asm/arch-rmobile/r8a7791.h                        |
 626 +----------------------------------
 arch/arm/include/asm/arch-rmobile/rcar-base.h                      |
 637 +++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-rmobile/rmobile.h
 |    6 +
 arch/arm/include/asm/arch-s5pc1xx/gpio.h                           |
 948 ++++++++++++++++++++++++++++++++++++++++++++--------
 arch/arm/include/asm/arch-tegra/gpio.h                             |
 20 ++
 arch/arm/include/asm/arch-tegra/pinmux.h
 |    5 +
 arch/arm/include/asm/arch-tegra/tegra_mmc.h
 |    2 -
 arch/arm/include/asm/arch-tegra114/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra124/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra20/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra30/pinmux.h
 |    1 +
 arch/arm/include/asm/imx-common/iomux-v3.h
 |    5 +
 arch/arm/include/asm/imx-common/video.h                            |
 24 ++
 arch/arm/lib/Makefile
 |    2 +-
 arch/arm/lib/cache.c                                               |
 13 +-
 arch/arm/lib/vectors.S                                             |
 291 ++++++++++++++++
 board/boundary/nitrogen6x/nitrogen6x.c                             |
 69 +---
 board/compulab/cm_t335/u-boot.lds
 |    1 +
 board/embest/mx6boards/Makefile
 |    9 +
 board/embest/mx6boards/mx6boards.c                                 |
 601 +++++++++++++++++++++++++++++++++
 board/freescale/mx31ads/u-boot.lds
 |    1 +
 board/freescale/mx6sabresd/mx6sabresd.c                            |
 67 +---
 board/freescale/mx6slevk/mx6slevk.c                                |
 20 ++
 board/gateworks/gw_ventana/gw_ventana.c                            |
 215 ++++++++++--
 board/gateworks/gw_ventana/ventana_eeprom.h                        |
 14 +-
 board/gumstix/pepper/Makefile                                      |
 13 +
 board/gumstix/pepper/board.c                                       |
 226 +++++++++++++
 board/gumstix/pepper/board.h                                       |
 19 ++
 board/gumstix/pepper/mux.c                                         |
 78 +++++
 board/nvidia/jetson-tk1/jetson-tk1.c
 |    6 +
 board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h                 |
 256 +++++++++-----
 board/nvidia/venice2/pinmux-config-venice2.h                       |
 567 +++++++++++++++----------------
 board/nvidia/venice2/venice2.c                                     |
 19 +-
 board/renesas/koelsch/koelsch.c                                    |
 194 +----------
 board/renesas/koelsch/qos.c                                        |
 404 ++++++++++++++---------
 board/renesas/lager/lager.c                                        |
 196 +----------
 board/renesas/lager/qos.c                                          |
 236 ++++++-------
 board/samsung/arndale/arndale.c                                    |
 11 +-
 board/samsung/common/misc.c                                        |
 130 ++++----
 board/samsung/goni/goni.c                                          |
 32 +-
 board/samsung/smdk5250/exynos5-dt.c                                |
 20 +-
 board/samsung/smdk5250/smdk5250.c                                  |
 19 +-
 board/samsung/smdk5420/smdk5420.c                                  |
 15 +-
 board/samsung/smdkc100/smdkc100.c
 |    5 +-
 board/samsung/smdkv310/smdkv310.c                                  |
 19 +-
 board/samsung/trats/trats.c                                        |
 39 +--
 board/samsung/trats2/trats2.c                                      |
 74 ++---
 board/samsung/universal_c210/universal.c                           |
 51 ++-
 board/siemens/common/board.c                                       |
 46 ++- board/siemens/{dxr2 =>
 draco}/Makefile                             |    0 board/siemens/{dxr2
 => draco}/board.c                              |  112 ++++---
 board/siemens/{dxr2 => draco}/board.h                              |
 26 +- board/siemens/{dxr2 =>
 draco}/mux.c                                |    2 +-
 board/siemens/pxm2/board.c                                         |
 10 +-
 board/siemens/rut/board.c
 |    2 +-
 board/ti/am335x/u-boot.lds
 |    1 +
 board/wandboard/wandboard.c                                        |
 146 ++++++--
 boards.cfg
 |    9 +-
 common/spl/spl_nand.c
 |    2 +-
 drivers/gpio/s5p_gpio.c                                            |
 204 ++++++++++--
 drivers/gpio/tegra_gpio.c                                          |
 20 ++
 drivers/mmc/tegra_mmc.c                                            |
 13 +-
 drivers/mtd/nand/omap_gpmc.c
 |    2 +-
 drivers/power/pmic/Makefile
 |    1 +
 drivers/power/pmic/pmic_ltc3676.c                                  |
 32 ++
 drivers/power/pmic/pmic_pfuze100.c
 |    2 +-
 drivers/video/Makefile
 |    1 +
 drivers/video/imx25lcdc.c                                          |
 121 +++++++
 include/configs/beaver.h
 |    3 +
 include/configs/cardhu.h
 |    3 +
 include/configs/da850evm.h
 |    1 +
 include/configs/draco.h                                            |
 92 ++++++
 include/configs/dxr2.h
 |    4 +-
 include/configs/embestmx6boards.h                                  |
 336 +++++++++++++++++++
 include/configs/exynos5-dt.h
 |    2 +
 include/configs/gw_ventana.h                                       |
 20 ++
 include/configs/hummingboard.h
 |    2 +
 include/configs/k2hk_evm.h
 |    1 +
 include/configs/koelsch.h                                          |
 36 +-
 include/configs/lager.h                                            |
 40 +--
 include/configs/m28evk.h
 |    1 -
 include/configs/mx53ard.h
 |    2 +
 include/configs/mx53evk.h
 |    2 +
 include/configs/mx53loco.h
 |    2 +
 include/configs/mx53smd.h
 |    2 +
 include/configs/mx6sabre_common.h
 |    2 +
 include/configs/mx6sabresd.h
 |    1 +
 include/configs/mx6slevk.h                                         |
 12 +
 include/configs/mxs.h
 |    1 +
 include/configs/nitrogen6x.h
 |    2 +
 include/configs/omap3_beagle.h                                     |
 10 +-
 include/configs/pepper.h                                           |
 99 ++++++
 include/configs/pxm2.h
 |    2 +-
 include/configs/s5p_goni.h
 |    4 +-
 include/configs/s5pc210_universal.h                                |
 23 +-
 include/configs/siemens-am33x-common.h
 |    8 +-
 include/configs/smdk5250.h
 |    4 +
 include/configs/smdk5420.h
 |    4 +
 include/configs/smdkv310.h
 |    1 +
 include/configs/snow.h
 |    4 +
 include/configs/tegra-common.h
 |    7 +
 include/configs/trats.h                                            |
 17 +-
 include/configs/trats2.h                                           |
 17 +-
 include/configs/udoo.h
 |    2 +
 include/configs/wandboard.h                                        |
 38 ++-
 include/palmas.h
 |    4 +
 include/power/ltc3676_pmic.h                                       |
 51 +++
 include/power/pfuze100_pmic.h
 |    1 +
 include/samsung/misc.h
 |    2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
 rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
 cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
 create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
 create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
 100644 arch/arm/lib/vectors.S create mode 100644
 board/embest/mx6boards/Makefile create mode 100644
 board/embest/mx6boards/mx6boards.c create mode 100644
 board/gumstix/pepper/Makefile create mode 100644
 board/gumstix/pepper/board.c create mode 100644
 board/gumstix/pepper/board.h create mode 100644
 board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
 draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
 (63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
 board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
 drivers/power/pmic/pmic_ltc3676.c create mode 100644
 drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
 create mode 100644 include/configs/embestmx6boards.h create mode

100644 include/configs/pepper.h create mode 100644 include/power/ltc3676_pmic.h

Amicalement,

Signature · 1 line
Albert.
#1 lore raw
Quoted 513 lines · Albert ARIBAUD

Hello Tom,

The following changes since commit
d7782d06534fe4fa47a49fa7c106de5ba85a9687:

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16 18:30:33 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-arm master

for you to fetch changes up to 05d134b084590684bcf4d832c0035952727b7cd9:

Merge remote-tracking branch 'u-boot/master' (2014-05-20 10:05:42 +0200)

Note: there still is a Zynq PR pending right now, but I wanted to get re-synchronized with mainline first; a further PR with Zynq and individual patches will arrive soon.

----------------------------------------------------------------

Akshay Saraswat (3):
Exynos5: config: Enable FIT
S5P: Exynos: Add GPIO pin numbering and rename definitions
S5P: Exynos: Config: Enable GPIO CMD config

Albert ARIBAUD (12):
arm1136: move cache code from start.S to cache.c
arm: move reset_cpu from start.S into cpu.c
arm: pxa: move SP check from start.S to cpuinfo.c
arm: remove unused _end_vect and _vectors_end symbols
arm: move exception handling out of start.S files Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' Merge remote-tracking branch 'u-boot-sh/rmobile' boards.cfg: reformat
Merge remote-tracking branch 'u-boot/master'

Ash Charles (1):
am335x: pepper: Add Gumstix Pepper AM335x-based machine

Belisko Marek (1):
mtd: nand: omap_gpmc: Fix update of read_ecc in oob

Christian Riesch (1):
arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais
image

Dmitry Lifshitz (3):
ARM: OMAP5: add UART4 support
ARM: OMAP5: Power: add LDO2 support for Palmas driver
ARM: OMAP5: add CKO buffer control mask

Egli, Samuel (7):
siemens: cosmetic: remove unused and rename defines
siemens: update DDR3 parameters for dxr2
siemens: add led cmd for flexible LED control
siemens: change LED indication in DFU mode
siemens: cosmetic: rename project_dir siemens:cosmetic, dxr2: rename dxr2 to draco siemens, draco: add new target

Eric Benard (8):
imx-common: add board_video_skip
nitrogen6x: use common board_video_skip
mx6sabresd: use common board_video_skip RiOTboard and MarSBoard: add new boards support imx-common/video: add detect_hdmi
nitrogen6x: use common detect_hdmi
mx6sabresd: use common detect_hdmi embest/mx6boards: use common detect_hdmi

Eric Nelson (1):
ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD

Fabio Estevam (11):
wandboard: Convert to generic board
mx53loco: Convert to generic board
mx6sabre_common: Convert to generic board
mx53ard: Convert to generic board
mx53smd: Convert to generic board
mx53evk: Convert to generic board
udoo: Convert to generic board
hummingboard: Convert to generic board
mx6slevk: Add SPI NOR flash support
nitrogen6x: Fix the PAD settings for the ECSPI chipselect
iomux-v3: Add support for mx6sl LVE bit

Inha Song (1):
samsung: misc: add env default option to lcd menu

Jaehoon Chung (1):
ARM: exynos: remove the unused code

Khoronzhuk, Ivan (1):
config: k2hk_evm: Add generic board support

Marek Vasut (1):
arm: mxs: Enable CONFIG_SYS_GENERIC_BOARD

Mateusz Zalega (1):
ARM: Samsung: s5p_goni: maintainer update

Nobuhiro Iwamatsu (22):
arm: rmobile: Coordinate the common part of the header file of
r8a7790 and r8a7791 arm: rmobile: r8a779x: Fix L2 cache init and latency setting arm: rmobile: koelsch: Change name of structure
arm: rmobile: koelsch: Remove NOR-Flash support
arm: rmobile: lager: Change name of the structure
arm: rmobile: lager: Remove NOR-Flash support
arm: rmobile: Merge functions to get the CPU information of
R8A7790 and R8A7791 arm: rmobile: Add 1 to value of the CPU revision in rmobile_get_cpu_rev_integer() arm: rmobile: Add rmobile_get_cpu_rev_fraction() for R-Car SoCs arm: rmobile: Add prototype for function to get the CPU information to rmobile.h arm:
rmobile: Update print_cpuinfo function arm: rmobile: r8a7790: Add support ES2 revision arm: rmobile: r8a7791: Add support ES2 revision
arm: rmobile: keolsch: Add support ES2 revision of R8A7791
arm: rmobile: lager: Update QoS initialization to version 0.955
arm: rmobile: koelsch: Update QoS initialization
arm: rmobile: koelsch: Update calculation of
CONFIG_SH_TMU_CLK_FREQ arm: rmobile: Add register infomation of PLL regsiter arm: rmobile: koelsch: Change to maximum CPU frequency
arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQ
arm: rmobile: lager: Change to maximum CPU frequency
arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPE

Otavio Salvador (2):
wandboard: add Future Eletronics 7" WVGA LCD extension board
wandboard: Pass video kernel arguments for HDMI and LCD

Przemyslaw Marczak (4):
samsung: misc: allows using environmental macros as args in menu
commands samsung: misc: add gpt restore option to lcd menu
samsung: misc: menu: increase delay in menu main loop
samsung: misc: remove download mode info screen

Robert Nelson (2):
omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revision
omap3_beagle: xM A/B validate new dtb exits in file system

Stefano Babic (3):
mx6: fix weird formatting in imx6q-sabreauto.dts Merge branch 'master' of git://git.denx.de/u-boot-arm
Merge branch 'master' of git://git.denx.de/u-boot-arm

Stephen Warren (10):
ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
ARM: tegra: fix CPU VDD comment in Tegra30 CPU init code
ARM: tegra: allow pinmux mux option not to be set by init tables
ARM: tegra: add GPIO initialization table function
ARM: tegra: add function to enable input clamping on tristate
ARM: tegra: make use of GPIO init table on Jetson TK1
ARM: tegra: clamp inputs on Jetson TK1
ARM: tegra: update Venice2 pinmux
ARM: tegra: Venice2 pinmux spreadsheet updates
ARM: tegra: use a CPU freq that all SKUs can support

Thomas Diener (2):
imx25: Add new hardware registers
video: Add support for imx25 lcd controller

Tim Harvey (10):
ventana: fixed comments in eeprom header
ventana: remove redundant include
power: make pfuze100 be able to coexist with other pmics
ventana: use non-generic pfuze100 init
power: Add support for LTC3676 PMIC
ventana: Add support for the LTC3676 PMIC
imx6: ventana: fix system-serial dt property
imx: ventana: Convert to generic board
imx: ventana: add HDMI and LVDS display capability
nand: remove CONFIG_SYS_NAND_PAGE_SIZE

Yegor Yefremov (1):
am33xx: add SSC enable macro

?ukasz Majewski (2):
trats2: config: fix: Set default console to ttySAC2
trats: config: fix: Set default console to ttySAC2

Makefile
| 2 +-
arch/arm/cpu/arm1136/start.S |
254 +-------------
arch/arm/cpu/arm1176/start.S |
198 +----------
arch/arm/cpu/arm720t/start.S |
229 +------------
arch/arm/cpu/arm720t/tegra-common/cpu.c |
10 +-
arch/arm/cpu/arm720t/tegra30/cpu.c |
23 +-
arch/arm/cpu/arm920t/ep93xx/u-boot.lds
| 3 +-
arch/arm/cpu/arm920t/start.S |
216 +-----------
arch/arm/cpu/arm926ejs/mxs/start.S |
92 +-----
arch/arm/cpu/arm926ejs/spear/start.S |
27 +- arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
| 1 +
arch/arm/cpu/arm926ejs/start.S |
262 +--------------
arch/arm/cpu/arm946es/cpu.c |
13 +
arch/arm/cpu/arm946es/start.S |
246 +-------------
arch/arm/cpu/arm_intcm/start.S |
228 +------------
arch/arm/cpu/armv7/exynos/pinmux.c |
561 +++++++++++++++++-------------- arch/arm/cpu/armv7/rmobile/Makefile
| 4 +-
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c |
29 -- arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>

 cpu_info-rcar.c} |   12 +-
 arch/arm/cpu/armv7/rmobile/cpu_info.c                              |
 49 ++-
 arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S                    |
 20 +-
 arch/arm/cpu/armv7/socfpga/lowlevel_init.S                         |
 15 +-
 arch/arm/cpu/armv7/start.S                                         |
 253 +-------------
 arch/arm/cpu/armv7/zynq/u-boot.lds
 |    2 +-
 arch/arm/cpu/pxa/cpuinfo.c
 |    6 +
 arch/arm/cpu/pxa/start.S                                           |
 253 +-------------
 arch/arm/cpu/sa1100/cpu.c                                          |
 14 +
 arch/arm/cpu/sa1100/start.S                                        |
 225 +------------
 arch/arm/cpu/tegra-common/pinmux-common.c                          |
 19 ++
 arch/arm/cpu/u-boot-spl.lds
 |    1 +
 arch/arm/cpu/u-boot.lds
 |    1 +
 arch/arm/dts/exynos4210-origen.dts
 |    4 +-
 arch/arm/dts/exynos4210-trats.dts
 |    6 +-
 arch/arm/dts/exynos4210-universal_c210.dts
 |    4 +-
 arch/arm/dts/exynos4412-trats2.dts
 |    4 +-
 arch/arm/dts/imx6q-sabreauto.dts                                   |
 10 +-
 arch/arm/imx-common/Makefile
 |    1 +
 arch/arm/imx-common/iomux-v3.c
 |    8 +
 arch/arm/imx-common/video.c                                        |
 65 ++++
 arch/arm/include/asm/arch-am33xx/clock.h
 |    2 +
 arch/arm/include/asm/arch-exynos/cpu.h                             |
 17 +-
 arch/arm/include/asm/arch-exynos/gpio.h                            |
 1761
 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------
 arch/arm/include/asm/arch-mx25/imx-regs.h                          |
 175 ++++++++++
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
 |    4 +
 arch/arm/include/asm/arch-omap5/clock.h
 |    3 +
 arch/arm/include/asm/arch-omap5/omap.h
 |    1 +
 arch/arm/include/asm/arch-rmobile/r8a7790.h                        |
 609 +---------------------------------
 arch/arm/include/asm/arch-rmobile/r8a7791.h                        |
 626 +----------------------------------
 arch/arm/include/asm/arch-rmobile/rcar-base.h                      |
 637 +++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-rmobile/rmobile.h
 |    6 +
 arch/arm/include/asm/arch-s5pc1xx/gpio.h                           |
 948 ++++++++++++++++++++++++++++++++++++++++++++--------
 arch/arm/include/asm/arch-tegra/gpio.h                             |
 20 ++
 arch/arm/include/asm/arch-tegra/pinmux.h
 |    5 +
 arch/arm/include/asm/arch-tegra/tegra_mmc.h
 |    2 -
 arch/arm/include/asm/arch-tegra114/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra124/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra20/pinmux.h
 |    1 +
 arch/arm/include/asm/arch-tegra30/pinmux.h
 |    1 +
 arch/arm/include/asm/imx-common/iomux-v3.h
 |    5 +
 arch/arm/include/asm/imx-common/video.h                            |
 24 ++
 arch/arm/lib/Makefile
 |    2 +-
 arch/arm/lib/cache.c                                               |
 13 +-
 arch/arm/lib/vectors.S                                             |
 291 ++++++++++++++++
 board/boundary/nitrogen6x/nitrogen6x.c                             |
 69 +---
 board/compulab/cm_t335/u-boot.lds
 |    1 +
 board/embest/mx6boards/Makefile
 |    9 +
 board/embest/mx6boards/mx6boards.c                                 |
 601 +++++++++++++++++++++++++++++++++
 board/freescale/mx31ads/u-boot.lds
 |    1 +
 board/freescale/mx6sabresd/mx6sabresd.c                            |
 67 +---
 board/freescale/mx6slevk/mx6slevk.c                                |
 20 ++
 board/gateworks/gw_ventana/gw_ventana.c                            |
 215 ++++++++++--
 board/gateworks/gw_ventana/ventana_eeprom.h                        |
 14 +-
 board/gumstix/pepper/Makefile                                      |
 13 +
 board/gumstix/pepper/board.c                                       |
 226 +++++++++++++
 board/gumstix/pepper/board.h                                       |
 19 ++
 board/gumstix/pepper/mux.c                                         |
 78 +++++
 board/nvidia/jetson-tk1/jetson-tk1.c
 |    6 +
 board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h                 |
 256 +++++++++-----
 board/nvidia/venice2/pinmux-config-venice2.h                       |
 567 +++++++++++++++----------------
 board/nvidia/venice2/venice2.c                                     |
 19 +-
 board/renesas/koelsch/koelsch.c                                    |
 194 +----------
 board/renesas/koelsch/qos.c                                        |
 404 ++++++++++++++---------
 board/renesas/lager/lager.c                                        |
 196 +----------
 board/renesas/lager/qos.c                                          |
 236 ++++++-------
 board/samsung/arndale/arndale.c                                    |
 11 +-
 board/samsung/common/misc.c                                        |
 130 ++++----
 board/samsung/goni/goni.c                                          |
 32 +-
 board/samsung/smdk5250/exynos5-dt.c                                |
 20 +-
 board/samsung/smdk5250/smdk5250.c                                  |
 19 +-
 board/samsung/smdk5420/smdk5420.c                                  |
 15 +-
 board/samsung/smdkc100/smdkc100.c
 |    5 +-
 board/samsung/smdkv310/smdkv310.c                                  |
 19 +-
 board/samsung/trats/trats.c                                        |
 39 +--
 board/samsung/trats2/trats2.c                                      |
 74 ++---
 board/samsung/universal_c210/universal.c                           |
 51 ++-
 board/siemens/common/board.c                                       |
 46 ++- board/siemens/{dxr2 =>
 draco}/Makefile                             |    0 board/siemens/{dxr2
 => draco}/board.c                              |  112 ++++---
 board/siemens/{dxr2 => draco}/board.h                              |
 26 +- board/siemens/{dxr2 =>
 draco}/mux.c                                |    2 +-
 board/siemens/pxm2/board.c                                         |
 10 +-
 board/siemens/rut/board.c
 |    2 +-
 board/ti/am335x/u-boot.lds
 |    1 +
 board/wandboard/wandboard.c                                        |
 146 ++++++--
 boards.cfg
 |    9 +-
 common/spl/spl_nand.c
 |    2 +-
 drivers/gpio/s5p_gpio.c                                            |
 204 ++++++++++--
 drivers/gpio/tegra_gpio.c                                          |
 20 ++
 drivers/mmc/tegra_mmc.c                                            |
 13 +-
 drivers/mtd/nand/omap_gpmc.c
 |    2 +-
 drivers/power/pmic/Makefile
 |    1 +
 drivers/power/pmic/pmic_ltc3676.c                                  |
 32 ++
 drivers/power/pmic/pmic_pfuze100.c
 |    2 +-
 drivers/video/Makefile
 |    1 +
 drivers/video/imx25lcdc.c                                          |
 121 +++++++
 include/configs/beaver.h
 |    3 +
 include/configs/cardhu.h
 |    3 +
 include/configs/da850evm.h
 |    1 +
 include/configs/draco.h                                            |
 92 ++++++
 include/configs/dxr2.h
 |    4 +-
 include/configs/embestmx6boards.h                                  |
 336 +++++++++++++++++++
 include/configs/exynos5-dt.h
 |    2 +
 include/configs/gw_ventana.h                                       |
 20 ++
 include/configs/hummingboard.h
 |    2 +
 include/configs/k2hk_evm.h
 |    1 +
 include/configs/koelsch.h                                          |
 36 +-
 include/configs/lager.h                                            |
 40 +--
 include/configs/m28evk.h
 |    1 -
 include/configs/mx53ard.h
 |    2 +
 include/configs/mx53evk.h
 |    2 +
 include/configs/mx53loco.h
 |    2 +
 include/configs/mx53smd.h
 |    2 +
 include/configs/mx6sabre_common.h
 |    2 +
 include/configs/mx6sabresd.h
 |    1 +
 include/configs/mx6slevk.h                                         |
 12 +
 include/configs/mxs.h
 |    1 +
 include/configs/nitrogen6x.h
 |    2 +
 include/configs/omap3_beagle.h                                     |
 10 +-
 include/configs/pepper.h                                           |
 99 ++++++
 include/configs/pxm2.h
 |    2 +-
 include/configs/s5p_goni.h
 |    4 +-
 include/configs/s5pc210_universal.h                                |
 23 +-
 include/configs/siemens-am33x-common.h
 |    8 +-
 include/configs/smdk5250.h
 |    4 +
 include/configs/smdk5420.h
 |    4 +
 include/configs/smdkv310.h
 |    1 +
 include/configs/snow.h
 |    4 +
 include/configs/tegra-common.h
 |    7 +
 include/configs/trats.h                                            |
 17 +-
 include/configs/trats2.h                                           |
 17 +-
 include/configs/udoo.h
 |    2 +
 include/configs/wandboard.h                                        |
 38 ++-
 include/palmas.h
 |    4 +
 include/power/ltc3676_pmic.h                                       |
 51 +++
 include/power/pfuze100_pmic.h
 |    1 +
 include/samsung/misc.h
 |    2 + 156 files changed, 7581 insertions(+), 6187 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
 rename arch/arm/cpu/armv7/rmobile/{cpu_info-r8a7790.c =>
 cpu_info-rcar.c} (50%) create mode 100644 arch/arm/imx-common/video.c
 create mode 100644 arch/arm/include/asm/arch-rmobile/rcar-base.h
 create mode 100644 arch/arm/include/asm/imx-common/video.h create mode
 100644 arch/arm/lib/vectors.S create mode 100644
 board/embest/mx6boards/Makefile create mode 100644
 board/embest/mx6boards/mx6boards.c create mode 100644
 board/gumstix/pepper/Makefile create mode 100644
 board/gumstix/pepper/board.c create mode 100644
 board/gumstix/pepper/board.h create mode 100644
 board/gumstix/pepper/mux.c rename board/siemens/{dxr2 =>
 draco}/Makefile (100%) rename board/siemens/{dxr2 => draco}/board.c
 (63%) rename board/siemens/{dxr2 => draco}/board.h (71%) rename
 board/siemens/{dxr2 => draco}/mux.c (99%) create mode 100644
 drivers/power/pmic/pmic_ltc3676.c create mode 100644
 drivers/video/imx25lcdc.c create mode 100644 include/configs/draco.h
 create mode 100644 include/configs/embestmx6boards.h create mode
Quoted 2 lines

100644 include/configs/pepper.h create mode 100644 include/power/ltc3676_pmic.h

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140522/e7d4cfdc/attachment.pgp>