mfd: AXP20x: Add support for AXP202 and AXP209
Subsystems (7)
v6 cover mfd: AXP20x: Add support for AXP202 and AXP209
AXP209 and AXP202 are the PMUs (Power Management Unit) used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company of Allwinner. AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature as well as 4 configurable GPIOs.
This set of patches introduces the core driver and support for two different subsystems:
- Regulators
- PEK (Power Enable Key)
Changes since v1:
- Added a new standalone patch for defconfig
- MFD core:
* Removed axp,system-power-controller property
- Bindings documentation:
* Corrected description for dcdc-workmode property
* Removed unused axp20x-pek compatible
- Input misc PEK driver:
* Fixed seconds in lower case
- Regulators subsystem:
* Fixed axp20x_set_suspend_voltage()
* Switched to using multi-bit control for regulators
* When "regulators" node is not found driver doesn't quit
* Driver is now using devm_regulator_register()
* Added module_platform_driver() instead of subsys_initcall()
- DT:
* Added new DTSI for AXP209
* Added support for cubietruck and olinuxino-micro
Changes since v2:
- Added a new patch for multi_v7_defconfig to enable MFD core and subsystems
- DT:
* Dropped axp,system-power-controller property from DTS
* Moved compatible and interrupt-related properties from the DTSI file to the DTS board files
- Regulators subsystem:
* Deleted useless struct axp20x_regulators
* Added a warning when out of specs values are used for the dcdc frequency
- MFD core:
* Fixed coding style
* Removed IDs from device table for i2c
- Bindings documentation:
* Several corrections and fixes
Changes since v3:
- Removed x-powers-axp209.dtsi file
- Rewritten bindings document
- MFD core:
* Fixed casting
* Better comments / documentation
- Input misc PEK driver:
* Timings are now expressed in ms and the sysfs appies the closest possible value
* No more useless pretty-printing
* Removed devm_request_threaded_irq in favour of devm_request_any_context_irq
* Moved from input attributes to platform device attributes
- Regulators subsystem:
* Removed suspend mode (axp20x_set_suspend_voltage)
* Added regulators input supply
- DT:
* DTs doesn't include anymore the dtsi
* Added input supplies for regulators
Changes since v4:
- Removed regulator patches already applied / acked by Mark Brown
- Input misc PEK driver:
* Don't print anymore the "us" unit
* Added cleanup for attributes when unbindind the device
* Fixed error code returned when device_create_file() fails
- DT:
* Enable all the regulators on at boot-time
* Removed min and max microvolts for all the regulators but DCDC2
* Moved the axp_ipsout regulator outside the MFD node
- MFD core:
* The supply regulators are now specified in the MFD driver using regulator_bulk_register_supply_alias() and the .parent_supplies in the MFD cell
Changes since v5:
- Added ACKs
- Fixed compilation warning (reported by Hans De Goede)
- Vendor-prefixes are now sorted
- Removed DT patch
Carlo Caione (7):
mfd: AXP20x: Add mfd driver for AXP20x PMIC
dt-bindings: add vendor-prefix for X-Powers
mfd: AXP20x: Add bindings documentation
input: misc: Add driver for AXP20x Power Enable Key
input: misc: Add ABI docs for AXP20x PEK
ARM: sunxi: Add AXP20x support in defconfig
ARM: sunxi: Add AXP20x support multi_v7_defconfig
.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-input-axp-pek create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt create mode 100644 drivers/input/misc/axp20x-pek.c create mode 100644 drivers/mfd/axp20x.c create mode 100644 include/linux/mfd/axp20x.h
Signature · 1 line
1.9.1
PATCH v6 1/7 mfd: AXP20x: Add mfd driver for AXP20x PMIC
This patch introduces the preliminary support for PMICs X-Powers AXP202 and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit) used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company of Allwinner.
The core enables support for two subsystems:
- PEK (Power Enable Key)
- Regulators
--- drivers/mfd/Kconfig | 12 +++ drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++++++++++++++++++++ 4 files changed, 451 insertions(+) create mode 100644 drivers/mfd/axp20x.c create mode 100644 include/linux/mfd/axp20x.h
drivers/mfd/Kconfig +12 -0
@@ -67,6 +67,18 @@ config MFD_BCM590XX help Support for the BCM590xx PMUs from Broadcom +config MFD_AXP20X + bool "X-Powers AXP20X" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C=y + help + If you say Y here you get support for the X-Powers AXP202 and AXP209. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + config MFD_CROS_EC tristate "ChromeOS Embedded Controller" select MFD_CORE
drivers/mfd/Makefile +1 -0
@@ -102,6 +102,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o obj-$(CONFIG_PMIC_DA9052) += da9052-core.o obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o +obj-$(CONFIG_MFD_AXP20X) += axp20x.o obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
drivers/mfd/axp20x.c new file +258 -0
258 lines not on this page · raw message
include/linux/mfd/axp20x.h new file +180 -0
180 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v6 2/7 dt-bindings: add vendor-prefix for X-Powers
In reply to Carlo Caione--- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -132,6 +132,7 @@ voipac Voipac Technologies s.r.o. winbond Winbond Electronics corp. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. +x-powers X-Powers xes Extreme Engineering Solutions (X-ES) xlnx Xilinx zyxel ZyXEL Communications Corp.
Signature · 1 line
1.9.1
PATCH v6 3/7 mfd: AXP20x: Add bindings documentation
In reply to Carlo CaioneBindings documentation for the AXP20x driver. In this file also sub-nodes are documented.
--- Documentation/devicetree/bindings/mfd/axp20x.txt | 93 ++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
Documentation/devicetree/bindings/mfd/axp20x.txt new file +93 -0
@@ -0,0 +1,93 @@ +AXP202/AXP209 device tree bindings + +The axp20x family current members :- +axp202 (X-Powers) +axp209 (X-Powers) + +Required properties: +- compatible: "x-powers,axp202" or "x-powers,axp209" +- reg: The I2C slave address for the AXP chip +- interrupt-parent: The parent interrupt controller +- interrupts: Interrupt specifiers for interrupt sources +- interrupt-controller: axp20x has its own internal IRQs +- #interrupt-cells: Should be set to 1 +- acin-supply: The input supply for LDO1 +- vin2-supply: The input supply for DCDC2 +- vin3-supply: The input supply for DCDC3 +- ldo24in-supply: The input supply for LDO2, LDO4 +- ldo3in-supply: The input supply for LDO3 +- ldo5in-supply: The input supply for LDO5 + +- regulators: A node that houses a sub-node for each regulator. The regulators are + bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2, + ldo3, ldo4, ldo5. The bindings details of individual regulator + device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt with + the exception of x-powers,dcdc-freq +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz + (range: 750-1875). Default: 1.5MHz + +Optional properties for DCDCs: +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode + Default: AUTO mode + +Example: + +axp209: pmic at 34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <&axp_ipsout_reg>; + vin2-supply = <&axp_ipsout_reg>; + vin3-supply = <&axp_ipsout_reg>; + ldo24in-supply = <&axp_ipsout_reg>; + ldo3in-supply = <&axp_ipsout_reg>; + ldo5in-supply = <&axp_ipsout_reg>; + + regulators { + x-powers,dcdc-freq = <1500>; + + axp_vcore_reg: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + axp_ddr_reg: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + axp_rtc_reg: ldo1 { + regulator-always-on; + }; + + axp_analog_reg: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + axp_pll_reg: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + }; + + axp_hdmi_reg: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + axp_mic_reg: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; +
Signature · 1 line
1.9.1
PATCH v6 3/7 mfd: AXP20x: Add bindings documentation
Hello,
Quoted 2 lines · Carlo Caione
Bindings documentation for the AXP20x driver. In this file also sub-nodes are documented.
I think this patch has been forgotten (I didn't find it in linus' tree or linux-next tree).
Best Regards,
Boris
Quoted 107 lines
Signed-off-by Carlo Caione <[email protected]>Acked-by Maxime Ripard <[email protected]>--- Documentation/devicetree/bindings/mfd/axp20x.txt | 93 ++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txtDocumentation/devicetree/bindings/mfd/axp20x.txt new file +93
-0@@ -0,0 +1,93 @@ +AXP202/AXP209 device tree bindings + +The axp20x family current members :- +axp202 (X-Powers) +axp209 (X-Powers) + +Required properties: +- compatible: "x-powers,axp202" or "x-powers,axp209" +- reg: The I2C slave address for the AXP chip +- interrupt-parent: The parent interrupt controller +- interrupts: Interrupt specifiers for interrupt sources +- interrupt-controller: axp20x has its own internal IRQs +- #interrupt-cells: Should be set to 1 +- acin-supply: The input supply for LDO1 +- vin2-supply: The input supply for DCDC2 +- vin3-supply: The input supply for DCDC3 +- ldo24in-supply: The input supply for LDO2, LDO4 +- ldo3in-supply: The input supply for LDO3 +- ldo5in-supply: The input supply for LDO5 + +- regulators: A node that houses a sub-node for each regulator. The regulators are + bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2, + ldo3, ldo4, ldo5. The bindings details of individual regulator + device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt with + the exception of x-powers,dcdc-freq +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz + (range: 750-1875). Default: 1.5MHz + +Optional properties for DCDCs: +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode + Default: AUTO mode + +Example: + +axp209: pmic at 34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <&axp_ipsout_reg>; + vin2-supply = <&axp_ipsout_reg>; + vin3-supply = <&axp_ipsout_reg>; + ldo24in-supply = <&axp_ipsout_reg>; + ldo3in-supply = <&axp_ipsout_reg>; + ldo5in-supply = <&axp_ipsout_reg>; + + regulators { + x-powers,dcdc-freq = <1500>; + + axp_vcore_reg: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + axp_ddr_reg: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + axp_rtc_reg: ldo1 { + regulator-always-on; + }; + + axp_analog_reg: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + axp_pll_reg: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + }; + + axp_hdmi_reg: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + axp_mic_reg: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; +
Signature · 3 lines
Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH v6 3/7 mfd: AXP20x: Add bindings documentation
Quoted 6 lines · Carlo Caione
Quoted 2 lines
Bindings documentation for the AXP20x driver. In this file also sub-nodes are documented.
I think this patch has been forgotten (I didn't find it in linus' tree or linux-next tree).
This patch-set became confusing. Some of the patches were applied in v5 and were still submitted for v6. I need Carlo to rebase on top of v3.16-rc1+ and re-submit with the Acks he's collected so far.
Quoted 107 lines
Quoted 106 lines
Signed-off-by Carlo Caione <[email protected]>Acked-by Maxime Ripard <[email protected]>--- Documentation/devicetree/bindings/mfd/axp20x.txt | 93 ++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txtDocumentation/devicetree/bindings/mfd/axp20x.txt new file +93
-0@@ -0,0 +1,93 @@ +AXP202/AXP209 device tree bindings + +The axp20x family current members :- +axp202 (X-Powers) +axp209 (X-Powers) + +Required properties: +- compatible: "x-powers,axp202" or "x-powers,axp209" +- reg: The I2C slave address for the AXP chip +- interrupt-parent: The parent interrupt controller +- interrupts: Interrupt specifiers for interrupt sources +- interrupt-controller: axp20x has its own internal IRQs +- #interrupt-cells: Should be set to 1 +- acin-supply: The input supply for LDO1 +- vin2-supply: The input supply for DCDC2 +- vin3-supply: The input supply for DCDC3 +- ldo24in-supply: The input supply for LDO2, LDO4 +- ldo3in-supply: The input supply for LDO3 +- ldo5in-supply: The input supply for LDO5 + +- regulators: A node that houses a sub-node for each regulator. The regulators are + bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2, + ldo3, ldo4, ldo5. The bindings details of individual regulator + device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt with + the exception of x-powers,dcdc-freq +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz + (range: 750-1875). Default: 1.5MHz + +Optional properties for DCDCs: +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode + Default: AUTO mode + +Example: + +axp209: pmic at 34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <&axp_ipsout_reg>; + vin2-supply = <&axp_ipsout_reg>; + vin3-supply = <&axp_ipsout_reg>; + ldo24in-supply = <&axp_ipsout_reg>; + ldo3in-supply = <&axp_ipsout_reg>; + ldo5in-supply = <&axp_ipsout_reg>; + + regulators { + x-powers,dcdc-freq = <1500>; + + axp_vcore_reg: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + axp_ddr_reg: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + axp_rtc_reg: ldo1 { + regulator-always-on; + }; + + axp_analog_reg: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + axp_pll_reg: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + }; + + axp_hdmi_reg: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + }; + + axp_mic_reg: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; +
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
[linux-sunxi] Re: [PATCH v6 3/7] mfd: AXP20x: Add bindings documentation
Quoted 10 lines · Lee Jones
Quoted 6 lines · Carlo Caione
Quoted 2 lines
Bindings documentation for the AXP20x driver. In this file also sub-nodes are documented.
I think this patch has been forgotten (I didn't find it in linus' tree or linux-next tree).
This patch-set became confusing. Some of the patches were applied in v5 and were still submitted for v6. I need Carlo to rebase on top of v3.16-rc1+ and re-submit with the Acks he's collected so far.
I'm confused too. At the time of the submission v6 was already the patchset without the patches from v5 already applied and v6 already contains all the ACKs I have collected (i.e. the input/misc driver has been already ack-ed by Dmitry, yet it seems not merged).
So what exactly do you want me to resubmit? The whole v6 on top of v3.16-rc1+?
Signature · 1 line
Carlo Caione
PATCH v6 4/7 input: misc: Add driver for AXP20x Power Enable Key
In reply to Carlo CaioneThis patch add support for the Power Enable Key found on MFD AXP202 and AXP209. Besides the basic support for the button, the driver adds two entries in sysfs to configure the time delay for power on/off.
--- drivers/input/misc/Kconfig | 11 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 293 insertions(+) create mode 100644 drivers/input/misc/axp20x-pek.c
drivers/input/misc/Kconfig +11 -0
@@ -393,6 +393,17 @@ config INPUT_RETU_PWRBUTTON To compile this driver as a module, choose M here. The module will be called retu-pwrbutton. +config INPUT_AXP20X_PEK + tristate "X-Powers AXP20X power button driver" + depends on MFD_AXP20X + help + Say Y here if you want to enable power key reporting via the + AXP20X PMIC. + + To compile this driver as a module, choose M here. The module will + be called axp20x-pek. + + config INPUT_TWL4030_PWRBUTTON tristate "TWL4030 Power button Driver" depends on TWL4030_CORE
drivers/input/misc/Makefile +1 -0
@@ -50,6 +50,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o +obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
drivers/input/misc/axp20x-pek.c new file +281 -0
281 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v6 5/7 input: misc: Add ABI docs for AXP20x PEK
In reply to Carlo CaioneAdd ABI entries for the PEK found on PMU X-Powers AXP202 and AXP209.
--- Documentation/ABI/testing/sysfs-driver-input-axp-pek | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-input-axp-pek
Documentation/ABI/testing/sysfs-driver-input-axp-pek new file +11 -0
@@ -0,0 +1,11 @@ +What: /sys/class/input/input(x)/startup +Date: March 2014 +Contact: Carlo Caione <[email protected]> +Description: Startup time in us. Board is powered on if the button is pressed + for more than <startup_time> + +What: /sys/class/input/input(x)/shutdown +Date: March 2014 +Contact: Carlo Caione <[email protected]> +Description: Shutdown time in us. Board is powered off if the button is pressed + for more than <shutdown_time>
Signature · 1 line
1.9.1
PATCH v6 6/7 ARM: sunxi: Add AXP20x support in defconfig
In reply to Carlo Caione--- arch/arm/configs/sunxi_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/configs/sunxi_defconfig +4 -0
@@ -40,6 +40,8 @@ CONFIG_SUN4I_EMAC=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AXP20X_PEK=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8
@@ -55,6 +57,7 @@ CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_MFD_AXP20X=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y
@@ -69,3 +72,4 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS=y CONFIG_PRINTK_TIME=y +CONFIG_REGULATOR_AXP20X=y
Signature · 1 line
1.9.1
PATCH v6 7/7 ARM: sunxi: Add AXP20x support multi_v7_defconfig
In reply to Carlo Caione--- arch/arm/configs/multi_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/configs/multi_v7_defconfig +3 -0
@@ -146,6 +146,7 @@ CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_AXP20X_PEK=y CONFIG_INPUT_MPU3050=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y
@@ -207,6 +208,7 @@ CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_MFD_AS3722=y +CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y
@@ -217,6 +219,7 @@ CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y
Signature · 1 line
1.9.1
v6 cover mfd: AXP20x: Add support for AXP202 and AXP209
In reply to Carlo CaioneQuoted 4 lines · Carlo Caione
This set of patches introduces the core driver and support for two different subsystems:
- Regulators
Quoted 13 lines
.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)
The regulator changes don't appear to be showing up in the diffstat or
obviously in the series?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140520/c8474148/attachment.sig>
v6 cover mfd: AXP20x: Add support for AXP202 and AXP209
Quoted 20 lines · Mark Brown
Quoted 4 lines · Carlo Caione
This set of patches introduces the core driver and support for two different subsystems:
- RegulatorsQuoted 13 lines
.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)
Quoted 2 lines
The regulator changes don't appear to be showing up in the diffstat or obviously in the series?
Right. Cut-and-paste error.
You have already applied the regulator patches so I didn't include them here (in theory I posted this series to be picked up by Lee).
Thanks,
Signature · 1 line
Carlo Caione
v6 cover mfd: AXP20x: Add support for AXP202 and AXP209
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
This set of patches introduces the core driver and support for two different subsystems:
- Regulators.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)
Quoted 6 lines
Quoted 2 lines
The regulator changes don't appear to be showing up in the diffstat or obviously in the series?
Right. Cut-and-paste error.
You have already applied the regulator patches so I didn't include them here (in theory I posted this series to be picked up by Lee).
That's fine. Just tell me which patches need to stay together and which are able to be applied through their respective subsystem trees separately. Then, once I have all the Acks I can apply no problem.
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 21 lines · Lee Jones
Quoted 21 lines
Quoted 20 lines
Quoted 4 lines
This set of patches introduces the core driver and support for two different subsystems:
- RegulatorsQuoted 13 lines
.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)The regulator changes don't appear to be showing up in the diffstat or obviously in the series?
Quoted 7 lines
Quoted 3 lines
Right. Cut-and-paste error.
You have already applied the regulator patches so I didn't include them here (in theory I posted this series to be picked up by Lee).That's fine. Just tell me which patches need to stay together and which are able to be applied through their respective subsystem trees separately. Then, once I have all the Acks I can apply no problem.
Hi Lee,
I'd say #1 for the MFD tree, #4 for the input subsystem, #2 #3 and #5 are documentations, #6 and #7 defconfigs add-on.
Thanks,
Signature · 1 line
Carlo Caione
Dmitry Torokhov
maintainerQuoted 26 lines · Carlo Caione
Quoted 25 lines · Lee Jones
Quoted 24 lines
Quoted 18 lines
Quoted 4 lines
This set of patches introduces the core driver and support for two different subsystems:
- RegulatorsQuoted 13 lines
.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)Quoted 2 lines
The regulator changes don't appear to be showing up in the diffstat or obviously in the series?
Right. Cut-and-paste error.
You have already applied the regulator patches so I didn't include them here (in theory I posted this series to be picked up by Lee).
Quoted 7 lines
Quoted 3 lines
That's fine. Just tell me which patches need to stay together and which are able to be applied through their respective subsystem trees separately. Then, once I have all the Acks I can apply no problem.
Hi Lee,
I'd say #1 for the MFD tree, #4 for the input subsystem, #2 #3 and #5 are documentations, #6 and #7 defconfigs add-on.
I am fine with the input piece going through MFD tree, no need to split it from the rest.
Thanks.
Signature · 1 line
Dmitry
Quoted 29 lines
Quoted 29 lines
Quoted 28 lines
Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
This set of patches introduces the core driver and support for two different subsystems:
- Regulators.../ABI/testing/sysfs-driver-input-axp-pek | 11 + Documentation/devicetree/bindings/mfd/axp20x.txt | 93 +++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/configs/sunxi_defconfig | 4 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/axp20x-pek.c | 281 +++++++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/axp20x.c | 258 +++++++++++++++++++ include/linux/mfd/axp20x.h | 180 +++++++++++++ 12 files changed, 856 insertions(+)Quoted 6 lines
Quoted 2 lines
The regulator changes don't appear to be showing up in the diffstat or obviously in the series?
Right. Cut-and-paste error.
You have already applied the regulator patches so I didn't include them here (in theory I posted this series to be picked up by Lee).That's fine. Just tell me which patches need to stay together and which are able to be applied through their respective subsystem trees separately. Then, once I have all the Acks I can apply no problem.
Quoted 6 lines
Quoted 3 lines
Hi Lee,
I'd say #1 for the MFD tree, #4 for the input subsystem, #2 #3 and #5 are documentations, #6 and #7 defconfigs add-on.I am fine with the input piece going through MFD tree, no need to split it from the rest.
Do you want a pull-request i.e. will this cause conflicts when Linus merges it with your tree, or is it okay for me to just apply it?
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog